Street · Somerset
Shopfront Glazing in Street
We cover Street and Somerset for shopfront glazing, from single display panes to complete aluminium or timber shopfronts with accessible entrance doors.
- BA16
- Guide from £375
About aluminium shopfronts in Street
In England, works that materially affect the external appearance of a shopfront, such as a new frontage, new entrance doors or a changed layout, usually need planning permission. Reglazing a broken pane to match the existing does not change the appearance, but check with the local planning authority if unsure.
Manual entrance doors in buildings other than dwellings in England should open with no more than 30N of force at the door edge from closed to 30 degrees, then 22.5N from 30 to 60 degrees. Heavy doors and strong closers often fail this, so closers are chosen and adjusted to suit.
If the building is listed, alterations to the shopfront need listed building consent as well as any planning permission. Many councils also publish shopfront design guides for conservation areas and high streets, which can set expectations on materials, proportions and the treatment of signs.
Under the Equality Act 2010 in England, Wales and Scotland, businesses serving the public must make reasonable adjustments, which can include physical changes such as a ramp where the only entrance is a step. Northern Ireland has its own disability discrimination law, so the duties there differ.
Included as standard
- Safety or security glass specified to suit the position
- Survey of the frontage, structure above and entrance layout
- Manifestation where required, final clean and handover
- Removal of old glazing and temporary boarding where needed
Street at a glance
- Postcodes covered
- BA16 and the surrounding area, including Wells, Shepton Mallet and Bridgwater
- Coast
- Street is well inland, around 22 km from the nearest coast, so salt exposure is not usually a factor.
- Daylight and sun
- In Street the midwinter sun reaches about 15° above the horizon at noon, with roughly 7.7 hours of daylight, rising to about 62° and 16.3 hours in midsummer. South- and west-facing display windows can fade stock and overheat the shop in summer, while low winter sun causes glare that hides window displays. Solar control glass, window film and internal blinds can all help.
- Access and setting
- Market-town and village shops are often in older or listed buildings where timber shopfronts and traditional proportions are expected. Council design guidance and longer travel for large glass deliveries can both affect the timescale.
- Rules in England
- Approved Document K requires safety glass in critical locations in England: glazing in doors and in side panels within 300 mm of a door, up to 1500 mm above floor level, and any glazing in walls or partitions up to 800 mm above floor level.
Guide prices in Street
| Typical job | Guide price inc VAT |
|---|---|
| Replace a laminated pane, 2000 × 2200 mm | £855 – £1,095 |
| Security laminated pane, 2000 × 2200 mm | £1,195 – £1,495 |
| Toughened door pane, 900 × 2000 mm | £375 – £485 |
Get a guide price for your size
Replacing windows and doors with similar ones is usually permitted development for houses in England. Flats, listed buildings and homes in conservation areas or covered by an Article 4 direction can need permission, so check with the council first.
Options to choose between
Insulated glass units
Sealed double-glazed units in the shopfront frames, reducing heat loss and condensation compared with single sheets of display glass.
Frameless glass entrance
Toughened glass doors on patch fittings and floor springs, giving an open, clear entrance between framed or frameless display screens.
Toughened display glass
Toughened safety glass that breaks into small, blunt pieces, used for doors and low-level panes where impact safety is the main need.
Shopfront Glazing in Street: questions
Do I have to remove the step at my shop entrance?
Not automatically, but in England, Wales and Scotland the Equality Act 2010 requires service providers to make reasonable adjustments, which can include physical changes like a ramp or a level threshold. What is reasonable depends on the business and the building. When an entrance is replaced, building regulations on access also apply to the new work.
What affects the cost of shopfront glazing?
The main cost drivers are the size and number of panes, the glass type and any security class, the frame material, the door type and ironmongery, and the access equipment needed to lift large panes. Automatic doors, bespoke shapes and out-of-hours working also add cost. See the guide prices, and your written quote fixes the price.
How wide should a shop entrance door be?
For new buildings in England, access guidance gives a minimum effective clear width of 1000mm for external doors used by the general public, and 775mm where an existing building is altered. The clear width is the usable opening with the door open, not the door size. Other UK nations publish their own guidance, so we confirm the applicable figure.
Does shop glass need markings on it?
Large areas of clear glass that people could walk into need markings. In England, the guidance for buildings other than dwellings puts manifestation at 850–1000mm and 1400–1600mm above the floor, and workplace rules across Great Britain require glass to be made apparent where needed for safety. Logos or frosted bands can meet this if they contrast clearly.
Do you cover Street for shopfront glazing?
Yes. We can quote for shopfront glazing across Street and the surrounding Somerset area, including postcode districts BA16, and nearby Wells, Shepton Mallet and Bridgwater. Start with your postcode on the quote form and a glazier will arrange a free survey before giving you a written quote.
Get a written quote in Street
Free survey for new glazing, clear guide prices and one point of contact for every glazing job.