Street · Somerset
Shower Screens in Street
Our glaziers fit frameless shower screens in Street using 8mm or 10mm toughened safety glass, with hinge and bracing finishes chosen to match your taps and fittings.
- BA16
- Guide from £395
Made to measure shower screen across Street
The glass screen stops spray, but it is not the waterproofing. The tanking behind the tiles, the tray or floor fall and the drain do that job. Clear silicone along the glass edges then seals the joints, and it needs time to cure before the shower is used.
Screens should be measured after tiling is finished, not from plans. Walls are often out of plumb and floors fall towards the drain, and the glass is made to follow those real angles. Measuring early is a common cause of uneven gaps and leaks.
Because toughened glass cannot be cut or drilled after toughening, hinge holes, clamp positions and notches around trays or skirting are formed before the glass goes into the furnace. A panel that does not fit has to be remade, so accurate templating matters.
A walk-in panel fixed only at the wall and floor needs a bracing bar running to the wall or ceiling to stop it flexing. The bar's position is planned around tiles, windows and shower valves, and a floor channel can reduce or remove the need for a brace.
What's included
- Fixing into solid backing, levelled and aligned
- Survey and measurement once tiling is complete
- Clear silicone sealing to tray, floor and walls
- Easy-clean coating where specified, plus care advice
Working in Street
- Postcodes covered
- BA16 and the surrounding area, including Wells, Shepton Mallet and Bridgwater
- Coast
- Street is well inland, around 22 km from the nearest coast, so salt exposure is not usually a factor.
- Daylight and sun
- In Street the midwinter sun reaches about 15° above the horizon at noon, with roughly 7.7 hours of daylight, rising to about 62° and 16.3 hours in midsummer. Bathrooms with small or north-facing windows benefit from clear or low-iron glass that does not block the daylight available. Where a window looks onto the shower, a satin band or obscure glass gives privacy without making the room feel darker.
- Access and setting
- Older rural homes often have uneven walls, sloping ceilings and timber floors that flex, all of which shape the screen design. Hard water is common in some areas, so an easy-clean coating and regular squeegeeing help keep the glass clear.
- Rules in England
- Approved Document K requires safety glass in critical locations in England: glazing in doors and in side panels within 300 mm of a door, up to 1500 mm above floor level, and any glazing in walls or partitions up to 800 mm above floor level.
Guide prices in Street
| Typical job | Guide price inc VAT |
|---|---|
| Walk-in shower panel | £395 – £695 |
| Hinged door with in-line panel | £795 – £1,295 |
| Corner or full enclosure | £995 – £1,595 |
Specification choices
Walk-in wet room panel
A single fixed glass panel with a bracing bar or floor channel, leaving an open entry and no door to clean or adjust.
Easy-clean coating
A water-repellent coating bonded to the glass that helps water bead and run off, reducing limescale and the time spent cleaning.
Pivot door
A door that swings on pivots set in from its edge, useful where the swing space in front of the shower is limited.
Shower Screens in Street: questions
What thickness of glass should a shower screen be?
For frameless screens, 8mm toughened glass suits most doors and enclosures, and 10mm is commonly used for walk-in and wet room panels that stand with little support. Thinner glass is used in framed enclosures where the frame does some of the work. We recommend a thickness at survey based on the panel size and how it is fixed.
Is a chipped shower screen safe to keep using?
A chip on the edge of toughened glass can weaken the whole panel, because the surface is under stress and damage at the edge can lead to sudden breakage. It is safer to stop using that door or panel and have it replaced. We can remake it from the original measurements or a fresh template.
Is an easy-clean coating on shower glass worth having?
An easy-clean coating makes water bead and run off, so limescale and soap marks build up more slowly and wiping takes less effort. It is most useful in hard-water areas. It does not replace cleaning, and its life depends on using non-abrasive products, so we give you the care instructions with the screen.
What affects the cost of a frameless shower screen?
The main cost drivers are the number and size of panels, glass thickness, the type of hinges, clamps and bracing, and any shaped cuts for sloping ceilings or trays. An easy-clean coating, low-iron or satin glass and special hardware finishes add cost. See the guide prices for typical ranges, and your written quote fixes the price.
Do you cover Street for shower screens?
Yes. We can quote for shower screens across Street and the surrounding Somerset area, including postcode districts BA16, and nearby Wells, Shepton Mallet and Bridgwater. Start with your postcode on the quote form and a glazier will arrange a free survey before giving you a written quote.
Get a written quote in Street
Free survey for new glazing, clear guide prices and one point of contact for every glazing job.