Redhill · Surrey
Shopfront Glazing in Redhill
We cover Redhill and Surrey for shopfront glazing, from single display panes to complete aluminium or timber shopfronts with accessible entrance doors.
- RH1
- RH2
- Guide from £375
Shopfront glazing in Redhill
Manual entrance doors in buildings other than dwellings in England should open with no more than 30N of force at the door edge from closed to 30 degrees, then 22.5N from 30 to 60 degrees. Heavy doors and strong closers often fail this, so closers are chosen and adjusted to suit.
If the building is listed, alterations to the shopfront need listed building consent as well as any planning permission. Many councils also publish shopfront design guides for conservation areas and high streets, which can set expectations on materials, proportions and the treatment of signs.
The same guidance in England asks for an accessible entrance to have a level threshold or, where a raised threshold cannot be avoided, one no more than 15mm high in total, with a level landing in front of the door at least 1500mm by 1500mm clear of the door swing.
Some councils' shopfront guidance discourages solid external roller shutters and grilles, and in England external security measures that change the frontage's appearance usually need planning permission. Laminated security glass or internal open-mesh grilles are often considered as alternatives that keep the window display visible.
Included as standard
- Removal of old glazing and temporary boarding where needed
- Installation, sealing and adjustment of entrance doors
- Safety or security glass specified to suit the position
- Aluminium or timber framing, doors and ironmongery as quoted
Working in Redhill
- Postcodes covered
- RH1, RH2 and the surrounding area, including Reigate, Horley and Caterham
- Coast
- Redhill is well inland, around 44 km from the nearest coast, so salt exposure is not usually a factor.
- Daylight and sun
- In Redhill the midwinter sun reaches about 15° above the horizon at noon, with roughly 7.6 hours of daylight, rising to about 62° and 16.4 hours in midsummer. South- and west-facing display windows can fade stock and overheat the shop in summer, while low winter sun causes glare that hides window displays. Solar control glass, window film and internal blinds can all help.
- Access and setting
- Market-town and village shops are often in older or listed buildings where timber shopfronts and traditional proportions are expected. Council design guidance and longer travel for large glass deliveries can both affect the timescale.
- Rules in England
- Approved Document K requires safety glass in critical locations in England: glazing in doors and in side panels within 300 mm of a door, up to 1500 mm above floor level, and any glazing in walls or partitions up to 800 mm above floor level.
Guide prices in Redhill
| Typical job | Guide price inc VAT |
|---|---|
| Replace a laminated pane, 2000 × 2200 mm | £855 – £1,095 |
| Security laminated pane, 2000 × 2200 mm | £1,195 – £1,495 |
| Toughened door pane, 900 × 2000 mm | £375 – £485 |
Get a guide price for your size
For shops and other non-domestic buildings in England, Approved Document M covers accessible entrances, and Approved Document K requires large areas of glass that people could walk into to carry manifestation (visible markings).
What you can choose
Aluminium shopfront framing
Slim, powder-coated or anodised aluminium frames for display glass and doors, available in many colours and suited to most modern frontages.
Frameless glass entrance
Toughened glass doors on patch fittings and floor springs, giving an open, clear entrance between framed or frameless display screens.
Toughened display glass
Toughened safety glass that breaks into small, blunt pieces, used for doors and low-level panes where impact safety is the main need.
Shopfront Glazing in Redhill: questions
What do security glass ratings such as P2A or P4A mean?
These are classes from BS EN 356, the standard for resistance of security glazing to manual attack. Classes P1A to P5A are tested by dropping a steel ball onto the glass from set heights, with higher numbers resisting more. Classes P6B to P8B are tested with repeated axe and hammer blows and suit higher-risk premises. We advise on a class at survey.
Do I need planning permission for a new shopfront?
In England, a new shopfront or alterations that materially change its appearance, such as new doors, a different layout or external shutters, usually need planning permission. Listed buildings also need listed building consent. Wales, Scotland and Northern Ireland have their own planning systems. We can provide drawings and specifications to support your application to the planning authority.
Do I need consent for new shop signs?
You may need advertisement consent from the planning authority. Many plain, non-illuminated fascia signs have deemed consent within set conditions, while illuminated signs and signs on listed buildings or in conservation areas more often need express consent. In England, displaying an advert without the consent it needs is a criminal offence, so check before ordering signage.
How wide should a shop entrance door be?
For new buildings in England, access guidance gives a minimum effective clear width of 1000mm for external doors used by the general public, and 775mm where an existing building is altered. The clear width is the usable opening with the door open, not the door size. Other UK nations publish their own guidance, so we confirm the applicable figure.
Do you cover Redhill for shopfront glazing?
Yes. We can quote for shopfront glazing across Redhill and the surrounding Surrey area, including postcode districts RH1 and RH2, and nearby Reigate, Horley and Caterham. Start with your postcode on the quote form and a glazier will arrange a free survey before giving you a written quote.
More glazing in Redhill
Shopfront Glazing nearby
Get a written quote in Redhill
Free survey for new glazing, clear guide prices and one point of contact for every glazing job.