Bedford · Bedfordshire
Shower Screens in Bedford
A tired shower curtain or leaking framed enclosure in Bedford can be replaced with clear toughened glass, fixed into solid backing and sealed neatly to the tiles.
- MK40
- MK41
- Guide from £395
Bespoke shower enclosure in Bedford
Toughened glass can very occasionally break on its own because of nickel sulphide inclusions. Heat soak testing to BS EN 14179 reduces that risk by breaking flawed panels in the factory, though it cannot remove it completely, and it can be specified for any screen.
Hinges carry the full weight of a glass door, so they must fix into solid backing. Tiled plasterboard or stud walls usually need timber noggins or suitable heavy-duty fixings behind the hinge positions, which is easier to arrange before tiling than afterwards.
An easy-clean coating is a water-repellent layer bonded to the glass that helps water run off and reduces limescale and soap marks. It does not stop cleaning altogether, and how long it lasts depends on following the care instructions and avoiding abrasive products.
The glass screen stops spray, but it is not the waterproofing. The tanking behind the tiles, the tray or floor fall and the drain do that job. Clear silicone along the glass edges then seals the joints, and it needs time to cure before the shower is used.
What's included
- Hinges, clamps, channels or bracing bars in your finish
- Fixing into solid backing, levelled and aligned
- Clear silicone sealing to tray, floor and walls
- Made-to-measure toughened safety glass with factory-made holes
Working in Bedford
- Postcodes covered
- MK40, MK41 and the surrounding area, including Kempston, Ampthill and St Neots
- Coast
- Bedford is well inland, around 90 km from the nearest coast, so salt exposure is not usually a factor.
- Daylight and sun
- In Bedford the midwinter sun reaches about 14° above the horizon at noon, with roughly 7.5 hours of daylight, rising to about 61° and 16.5 hours in midsummer. Bathrooms with small or north-facing windows benefit from clear or low-iron glass that does not block the daylight available. Where a window looks onto the shower, a satin band or obscure glass gives privacy without making the room feel darker.
- Access and setting
- Flats often mean carrying large panels up stairs or in small lifts, so panel sizes may need splitting. Building rules on working hours and noise, and bathrooms above other homes, make careful sealing and protection of finishes especially important.
- Rules in England
- Approved Document K requires safety glass in critical locations in England: glazing in doors and in side panels within 300 mm of a door, up to 1500 mm above floor level, and any glazing in walls or partitions up to 800 mm above floor level.
Guide prices in Bedford
| Typical job | Guide price inc VAT |
|---|---|
| Walk-in shower panel | £395 – £695 |
| Hinged door with in-line panel | £795 – £1,295 |
| Corner or full enclosure | £995 – £1,595 |
Choosing your shower screens
Pivot door
A door that swings on pivots set in from its edge, useful where the swing space in front of the shower is limited.
Easy-clean coating
A water-repellent coating bonded to the glass that helps water bead and run off, reducing limescale and the time spent cleaning.
Low-iron glass
Glass with less iron, which removes the green edge tint of standard glass and keeps tiles and stone looking their true colour.
Shower Screens in Bedford: questions
When should my shower screen be measured?
Your screen should be measured once the walls are tiled and the tray or wet room floor is finished. The glass is made to follow the exact angles of the finished surfaces, and tiles, adhesive and trims all change the dimensions. If you are mid-renovation, we can advise on fixing positions and backing before tiling starts.
How long does it take to fit a shower screen?
Most shower screens are fitted in a single visit once the glass has been made, which usually takes a couple of weeks after measuring. The silicone then needs time to cure, so you should wait before using the shower, and we tell you how long on the day. Your quote confirms the expected timescale.
Can a shower screen be fitted to a stud or plasterboard wall?
Yes, provided the hinges and brackets fix into solid backing. On stud or plasterboard walls that usually means timber noggins behind the fixing points, or suitable heavy-duty fixings where noggins were not fitted. A heavy glass door on weak fixings can drop or pull away, so we check the wall during the survey.
Is a chipped shower screen safe to keep using?
A chip on the edge of toughened glass can weaken the whole panel, because the surface is under stress and damage at the edge can lead to sudden breakage. It is safer to stop using that door or panel and have it replaced. We can remake it from the original measurements or a fresh template.
Do you cover Bedford for shower screens?
Yes. We can quote for shower screens across Bedford and the surrounding Bedfordshire area, including postcode districts MK40 and MK41, and nearby Kempston, Ampthill and St Neots. Start with your postcode on the quote form and a glazier will arrange a free survey before giving you a written quote.
Get a written quote in Bedford
Free survey for new glazing, clear guide prices and one point of contact for every glazing job.