Call 0800 088 6248

New Malden · Greater London

Shower Screens in New Malden

We cover New Malden and Greater London for made-to-measure shower screens, from walk-in wet room panels to hinged corner enclosures, with every job surveyed and quoted in writing.

  • KT3
  • KT5
  • KT1
  • Guide from £395

Get your free quote

Start with your postcode. A glazier will be in touch to arrange a free survey.

By sending this form you agree we can contact you about this enquiry. See our privacy policy for how we use your details.

No obligation. Prefer to talk? Call 0800 088 6248 or WhatsApp us.

Wet room glass panel in New Malden: what to know

The glass screen stops spray, but it is not the waterproofing. The tanking behind the tiles, the tray or floor fall and the drain do that job. Clear silicone along the glass edges then seals the joints, and it needs time to cure before the shower is used.

Screens should be measured after tiling is finished, not from plans. Walls are often out of plumb and floors fall towards the drain, and the glass is made to follow those real angles. Measuring early is a common cause of uneven gaps and leaks.

An easy-clean coating is a water-repellent layer bonded to the glass that helps water run off and reduces limescale and soap marks. It does not stop cleaning altogether, and how long it lasts depends on following the care instructions and avoiding abrasive products.

A walk-in panel fixed only at the wall and floor needs a bracing bar running to the wall or ceiling to stop it flexing. The bar's position is planned around tiles, windows and shower valves, and a floor channel can reduce or remove the need for a brace.

What a typical job includes

  • Made-to-measure toughened safety glass with factory-made holes
  • Hinges, clamps, channels or bracing bars in your finish
  • Clear silicone sealing to tray, floor and walls
  • Fixing into solid backing, levelled and aligned
Frameless walk-in shower screen with black fittings in a tiled bathroom

New Malden at a glance

Postcodes covered
KT3, KT5, KT1 and the surrounding area, including Surbiton, Kingston upon Thames and Morden
Coast
New Malden is well inland, around 44 km from the nearest coast, so salt exposure is not usually a factor.
Daylight and sun
In New Malden the midwinter sun reaches about 15° above the horizon at noon, with roughly 7.6 hours of daylight, rising to about 62° and 16.4 hours in midsummer. Bathrooms with small or north-facing windows benefit from clear or low-iron glass that does not block the daylight available. Where a window looks onto the shower, a satin band or obscure glass gives privacy without making the room feel darker.
Access and setting
Older rural homes often have uneven walls, sloping ceilings and timber floors that flex, all of which shape the screen design. Hard water is common in some areas, so an easy-clean coating and regular squeegeeing help keep the glass clear.
Rules in England
Approved Document K requires safety glass in critical locations in England: glazing in doors and in side panels within 300 mm of a door, up to 1500 mm above floor level, and any glazing in walls or partitions up to 800 mm above floor level.

Guide prices in New Malden

Guide prices inc VAT for typical jobs. Remote and island locations are quoted by arrangement. Your written quote fixes the price after measuring.
Typical jobGuide price inc VAT
Walk-in shower panel£395 – £695
Hinged door with in-line panel£795 – £1,295
Corner or full enclosure£995 – £1,595

Get a guide price for your size

Specification choices

Over-bath screen

A fixed or hinged toughened glass panel on the bath edge, made to measure for baths that sit against sloping ceilings or uneven walls.

Low-iron glass

Glass with less iron, which removes the green edge tint of standard glass and keeps tiles and stone looking their true colour.

Walk-in wet room panel

A single fixed glass panel with a bracing bar or floor channel, leaving an open entry and no door to clean or adjust.

Shower Screens in New Malden: questions

What thickness of glass should a shower screen be?

For frameless screens, 8mm toughened glass suits most doors and enclosures, and 10mm is commonly used for walk-in and wet room panels that stand with little support. Thinner glass is used in framed enclosures where the frame does some of the work. We recommend a thickness at survey based on the panel size and how it is fixed.

What affects the cost of a frameless shower screen?

The main cost drivers are the number and size of panels, glass thickness, the type of hinges, clamps and bracing, and any shaped cuts for sloping ceilings or trays. An easy-clean coating, low-iron or satin glass and special hardware finishes add cost. See the guide prices for typical ranges, and your written quote fixes the price.

Is a chipped shower screen safe to keep using?

A chip on the edge of toughened glass can weaken the whole panel, because the surface is under stress and damage at the edge can lead to sudden breakage. It is safer to stop using that door or panel and have it replaced. We can remake it from the original measurements or a fresh template.

Is an easy-clean coating on shower glass worth having?

An easy-clean coating makes water bead and run off, so limescale and soap marks build up more slowly and wiping takes less effort. It is most useful in hard-water areas. It does not replace cleaning, and its life depends on using non-abrasive products, so we give you the care instructions with the screen.

Do you cover New Malden for shower screens?

Yes. We can quote for shower screens across New Malden and the surrounding Greater London area, including postcode districts KT3, KT5 and KT1, and nearby Surbiton, Kingston upon Thames and Morden. Start with your postcode on the quote form and a glazier will arrange a free survey before giving you a written quote.

Get a written quote in New Malden

Free survey for new glazing, clear guide prices and one point of contact for every glazing job.

CallGet a quote