Orpington · Greater London
Shower Screens in Orpington
Is a chipped or sagging shower door bothering you in Orpington? We can measure, remake and refit the glass, and check the hinges and wall fixings at the same time.
- BR6
- BR5
- BR7
- Guide from £395
Walk in shower screen for homes and businesses in Orpington
Screens should be measured after tiling is finished, not from plans. Walls are often out of plumb and floors fall towards the drain, and the glass is made to follow those real angles. Measuring early is a common cause of uneven gaps and leaks.
A walk-in panel fixed only at the wall and floor needs a bracing bar running to the wall or ceiling to stop it flexing. The bar's position is planned around tiles, windows and shower valves, and a floor channel can reduce or remove the need for a brace.
Limescale builds up more quickly in hard-water areas. Wiping the glass with a squeegee after each shower, cleaning weekly with a mild non-abrasive cleaner and avoiding scouring pads keeps it clear. Harsh descalers can also dull metal hinges and attack silicone seals.
Glass thickness is usually 8mm or 10mm for frameless work. 8mm suits most doors and enclosures, while 10mm is commonly used for walk-in and wet room panels that stand with little support and need to stay rigid when knocked or leaned on.
What's included
- Made-to-measure toughened safety glass with factory-made holes
- Easy-clean coating where specified, plus care advice
- Survey and measurement once tiling is complete
- Clear silicone sealing to tray, floor and walls
Orpington at a glance
- Postcodes covered
- BR6, BR5, BR7 and the surrounding area, including Swanley, Bromley and Bexleyheath
- Coast
- Orpington is well inland, around 20 km from the nearest coast, so salt exposure is not usually a factor.
- Daylight and sun
- In Orpington the midwinter sun reaches about 15° above the horizon at noon, with roughly 7.6 hours of daylight, rising to about 62° and 16.4 hours in midsummer. Bathrooms with small or north-facing windows benefit from clear or low-iron glass that does not block the daylight available. Where a window looks onto the shower, a satin band or obscure glass gives privacy without making the room feel darker.
- Access and setting
- Older rural homes often have uneven walls, sloping ceilings and timber floors that flex, all of which shape the screen design. Hard water is common in some areas, so an easy-clean coating and regular squeegeeing help keep the glass clear.
- Rules in England
- Approved Document K requires safety glass in critical locations in England: glazing in doors and in side panels within 300 mm of a door, up to 1500 mm above floor level, and any glazing in walls or partitions up to 800 mm above floor level.
Guide prices in Orpington
| Typical job | Guide price inc VAT |
|---|---|
| Walk-in shower panel | £395 – £695 |
| Hinged door with in-line panel | £795 – £1,295 |
| Corner or full enclosure | £995 – £1,595 |
What you can choose
Satin or tinted glass
Satin bands, full satin panels or grey and bronze tints that add privacy or style while still letting light into the shower.
Over-bath screen
A fixed or hinged toughened glass panel on the bath edge, made to measure for baths that sit against sloping ceilings or uneven walls.
Walk-in wet room panel
A single fixed glass panel with a bracing bar or floor channel, leaving an open entry and no door to clean or adjust.
Shower Screens in Orpington: questions
Is an easy-clean coating on shower glass worth having?
An easy-clean coating makes water bead and run off, so limescale and soap marks build up more slowly and wiping takes less effort. It is most useful in hard-water areas. It does not replace cleaning, and its life depends on using non-abrasive products, so we give you the care instructions with the screen.
Is a chipped shower screen safe to keep using?
A chip on the edge of toughened glass can weaken the whole panel, because the surface is under stress and damage at the edge can lead to sudden breakage. It is safer to stop using that door or panel and have it replaced. We can remake it from the original measurements or a fresh template.
What thickness of glass should a shower screen be?
For frameless screens, 8mm toughened glass suits most doors and enclosures, and 10mm is commonly used for walk-in and wet room panels that stand with little support. Thinner glass is used in framed enclosures where the frame does some of the work. We recommend a thickness at survey based on the panel size and how it is fixed.
Why have a shower screen made to measure instead of buying one?
A made-to-measure screen fits the space exactly, which matters where walls are out of plumb, ceilings slope, trays are non-standard or the opening is an unusual width. Off-the-shelf enclosures rely on adjustment profiles that can leave wide gaps or visible frames. Bespoke glass follows the real shape of the room and keeps sealant lines neat.
Do you cover Orpington for shower screens?
Yes. We can quote for shower screens across Orpington and the surrounding Greater London area, including postcode districts BR6, BR5 and BR7, and nearby Swanley, Bromley and Bexleyheath. Start with your postcode on the quote form and a glazier will arrange a free survey before giving you a written quote.
Get a written quote in Orpington
Free survey for new glazing, clear guide prices and one point of contact for every glazing job.