Call 0800 088 6248

Greater Manchester · England

Shower Screens in Greater Manchester

Our glaziers fit frameless shower screens in Greater Manchester using 8mm or 10mm toughened safety glass, with hinge and bracing finishes chosen to match your taps and fittings.

  • Guide from £395
  • 40 towns covered
  • Postcode areas BL, M, OL, SK, WA, WN

Get your free quote

Start with your postcode. A glazier will be in touch to arrange a free survey.

By sending this form you agree we can contact you about this enquiry. See our privacy policy for how we use your details.

No obligation. Prefer to talk? Call 0800 088 6248 or WhatsApp us.

Made to measure shower screen in Greater Manchester: what to know

Hinges carry the full weight of a glass door, so they must fix into solid backing. Tiled plasterboard or stud walls usually need timber noggins or suitable heavy-duty fixings behind the hinge positions, which is easier to arrange before tiling than afterwards.

Screens should be measured after tiling is finished, not from plans. Walls are often out of plumb and floors fall towards the drain, and the glass is made to follow those real angles. Measuring early is a common cause of uneven gaps and leaks.

An easy-clean coating is a water-repellent layer bonded to the glass that helps water run off and reduces limescale and soap marks. It does not stop cleaning altogether, and how long it lasts depends on following the care instructions and avoiding abrasive products.

The glass screen stops spray, but it is not the waterproofing. The tanking behind the tiles, the tray or floor fall and the drain do that job. Clear silicone along the glass edges then seals the joints, and it needs time to cure before the shower is used.

Frameless walk-in shower screen with black fittings in a tiled bathroom

What applies in Greater Manchester

Approved Document K requires safety glass in critical locations in England: glazing in doors and in side panels within 300 mm of a door, up to 1500 mm above floor level, and any glazing in walls or partitions up to 800 mm above floor level.

Parts of Greater Manchester are within about 17 km of the coast, where exposure to wind and salt air is worth planning for. Shower glass sits indoors, so salt air has little effect on it, but coastal homes can have damp, humid air that slows drying. Good bathroom ventilation and a quick squeegee after use help prevent mould on the silicone and marks on the hardware.

Flats often mean carrying large panels up stairs or in small lifts, so panel sizes may need splitting. Building rules on working hours and noise, and bathrooms above other homes, make careful sealing and protection of finishes especially important.

Guide prices

Guide prices inc VAT for typical jobs. Remote and island locations are quoted by arrangement. Your written quote fixes the price after measuring.
Typical jobGuide price inc VAT
Walk-in shower panel£395 – £695
Hinged door with in-line panel£795 – £1,295
Corner or full enclosure£995 – £1,595

Choosing your shower screens

Pivot door

A door that swings on pivots set in from its edge, useful where the swing space in front of the shower is limited.

Walk-in wet room panel

A single fixed glass panel with a bracing bar or floor channel, leaving an open entry and no door to clean or adjust.

Satin or tinted glass

Satin bands, full satin panels or grey and bronze tints that add privacy or style while still letting light into the shower.

Hinged door enclosure

A glass door on wall or glass hinges with fixed side panels, suiting alcoves, corners and trays where a fully enclosed shower is wanted.

Shower Screens in Greater Manchester: questions

Can a shower screen be fitted to a stud or plasterboard wall?

Yes, provided the hinges and brackets fix into solid backing. On stud or plasterboard walls that usually means timber noggins behind the fixing points, or suitable heavy-duty fixings where noggins were not fitted. A heavy glass door on weak fixings can drop or pull away, so we check the wall during the survey.

When should my shower screen be measured?

Your screen should be measured once the walls are tiled and the tray or wet room floor is finished. The glass is made to follow the exact angles of the finished surfaces, and tiles, adhesive and trims all change the dimensions. If you are mid-renovation, we can advise on fixing positions and backing before tiling starts.

Is an easy-clean coating on shower glass worth having?

An easy-clean coating makes water bead and run off, so limescale and soap marks build up more slowly and wiping takes less effort. It is most useful in hard-water areas. It does not replace cleaning, and its life depends on using non-abrasive products, so we give you the care instructions with the screen.

Is a chipped shower screen safe to keep using?

A chip on the edge of toughened glass can weaken the whole panel, because the surface is under stress and damage at the edge can lead to sudden breakage. It is safer to stop using that door or panel and have it replaced. We can remake it from the original measurements or a fresh template.

Which parts of Greater Manchester do you cover for shower screens?

We cover the whole of Greater Manchester, including Manchester, Oldham, Wigan, Bolton and Stockport, and postcode areas BL, M, OL, SK, WA, WN. Building rules for shower screens here follow the regulations for England. Enter your postcode on the quote form and we will confirm cover; then a glazier will arrange a free survey before giving you a written quote.

Get a written quote in Greater Manchester

Free survey for new glazing, clear guide prices and one point of contact for every glazing job.

CallGet a quote