Greater Manchester · England

Glass Splashbacks in Greater Manchester

Our glaziers fit back-painted glass splashbacks in Greater Manchester, using low-iron glass for pale colours so whites and creams look true to the sample you chose.

Guide from £225
40 towns covered
Postcode areas BL, M, OL, SK, WA, WN

About toughened glass splashback in Greater Manchester

Colours look different on screens, in daylight and under kitchen lighting, so choose from a physical glass sample rather than a website or paint chart. We can match many paint and RAL colours, and a sample panel viewed in your own kitchen avoids surprises.

After templating, made-to-measure splashbacks are usually ready within a few weeks, depending on colour and finish. Fitting a typical kitchen takes part of a day, and the kitchen can normally be used again straight afterwards, though the silicone needs time to cure fully.

Glass splashbacks have no grout lines to stain, so cleaning is simply a soft cloth with warm soapy water or a non-abrasive glass cleaner. Avoid scourers, abrasive creams and sharp scrapers, which can scratch the glass surface and dull the finish over time.

Hob makers set minimum clearances between the hob and nearby wall surfaces, and gas hobs in particular can have specific requirements. We check your hob's installation instructions before ordering so the glass, its cut-outs and any joints sit where the manufacturer allows.

Pale green glass splashback behind a hob in a white kitchen

Towns we cover for glass splashbacks in Greater Manchester

Choose your town for local details, nearby areas and the postcode districts we cover.

What applies in Greater Manchester

Building regulations do not usually apply to this type of work, but we confirm anything that does in writing with your quote.

Parts of Greater Manchester are within about 17 km of the coast, where exposure to wind and salt air is worth planning for. Splashbacks sit indoors, so the coast affects them little, but kitchens in damp coastal homes can see condensation on cold external walls. The wall needs to be dry and sound before bonding, and good extraction helps keep edges and silicone clean.

Kitchens in flats and terraces often have narrow access and tight stairs, so long splashbacks may be split into shorter panels with planned joints. Parking for the fitting team and building rules on working hours can also affect scheduling.

Guide prices

Guide prices inc VAT for typical jobs. Remote and island locations are quoted by arrangement. Your written quote fixes the price after measuring.
Typical job	Guide price inc VAT
Hob splashback, 900 × 750 mm	£225 – £285
Run behind worktop, 2400 × 600 mm	£395 – £515
Low-iron, 900 × 750 mm	£235 – £295

Choosing your glass splashbacks

Clear glass panel

Unpainted toughened glass over a painted wall or feature finish, protecting it from splashes while letting the surface behind show.

Satin finish

Acid-etched glass with a soft, low-sheen face that reduces reflections and glare, useful opposite windows or bright lighting.

Printed design

A digitally printed image or pattern on the back of the glass, sealed behind it so the front stays smooth and wipeable.

Back-painted colour

Toughened glass painted on the back in a matched colour, giving a smooth, glossy finish in almost any shade to suit units or walls.

Glass Splashbacks in Greater Manchester: questions

How long does it take to get a glass splashback fitted?

After templating, made-to-measure splashbacks are usually ready within a few weeks, depending on the colour and finish. Fitting a typical kitchen takes part of a day, and you can normally use the kitchen again once we have finished. The silicone needs time to cure fully, and we tell you how long on the day.

How do I clean a glass splashback?

Wipe it with a soft cloth and warm soapy water, or a non-abrasive glass cleaner, then buff dry for a streak-free finish. Grease behind the hob comes off easily because there are no grout lines. Avoid scourers, abrasive creams and blades, which can scratch the glass, and do not use cleaners that could seep behind the edges.

Can a glass splashback go behind a hob?

Yes, provided it is toughened glass and the hob maker's clearances are followed. Toughened glass copes with the heat from a hob far better than ordinary glass, and it is what we fit behind cookers. Some gas hobs need a minimum gap to the wall, so we check your hob's instructions before the glass is ordered.

Can you cut holes in a glass splashback for sockets?

Yes. Socket, switch and extractor cut-outs are made at the factory before the glass is toughened, because toughened glass cannot be cut afterwards. That means socket positions must be final when we template. If sockets need moving or adding, a qualified electrician should do that first, and we template around the new positions.

Which parts of Greater Manchester do you cover for glass splashbacks?

We cover the whole of Greater Manchester, including Manchester, Oldham, Wigan, Bolton and Stockport, and postcode areas BL, M, OL, SK, WA, WN. Building rules for glass splashbacks here follow the regulations for England. Enter your postcode on the quote form and we will confirm cover; then a glazier will arrange a free survey before giving you a written quote.

Other glazing services in Greater Manchester

All glazing in Greater Manchester · Glass Splashbacks across the UK

Get a written quote in Greater Manchester

Free survey for new glazing, clear guide prices and one point of contact for every glazing job.

Get a guide price 0800 088 6248 WhatsApp