Gosport · Hampshire
Shower Screens in Gosport
A tired shower curtain or leaking framed enclosure in Gosport can be replaced with clear toughened glass, fixed into solid backing and sealed neatly to the tiles.
- PO12
- PO13
- Guide from £395
About wet room glass panel in Gosport
Screens should be measured after tiling is finished, not from plans. Walls are often out of plumb and floors fall towards the drain, and the glass is made to follow those real angles. Measuring early is a common cause of uneven gaps and leaks.
Glass thickness is usually 8mm or 10mm for frameless work. 8mm suits most doors and enclosures, while 10mm is commonly used for walk-in and wet room panels that stand with little support and need to stay rigid when knocked or leaned on.
An easy-clean coating is a water-repellent layer bonded to the glass that helps water run off and reduces limescale and soap marks. It does not stop cleaning altogether, and how long it lasts depends on following the care instructions and avoiding abrasive products.
Toughened glass can very occasionally break on its own because of nickel sulphide inclusions. Heat soak testing to BS EN 14179 reduces that risk by breaking flawed panels in the factory, though it cannot remove it completely, and it can be specified for any screen.
Included as standard
- Survey and measurement once tiling is complete
- Made-to-measure toughened safety glass with factory-made holes
- Hinges, clamps, channels or bracing bars in your finish
- Fixing into solid backing, levelled and aligned
Working in Gosport
- Postcodes covered
- PO12, PO13 and the surrounding area, including Portsmouth, Fareham and Ryde
- Coast
- Gosport is about 1 km from the coast or a tidal estuary, so salt air and wind-driven rain are worth planning for. Shower glass sits indoors, so salt air has little effect on it, but coastal homes can have damp, humid air that slows drying. Good bathroom ventilation and a quick squeegee after use help prevent mould on the silicone and marks on the hardware.
- Daylight and sun
- In Gosport the midwinter sun reaches about 16° above the horizon at noon, with roughly 7.7 hours of daylight, rising to about 63° and 16.3 hours in midsummer. Bathrooms with small or north-facing windows benefit from clear or low-iron glass that does not block the daylight available. Where a window looks onto the shower, a satin band or obscure glass gives privacy without making the room feel darker.
- Access and setting
- Flats often mean carrying large panels up stairs or in small lifts, so panel sizes may need splitting. Building rules on working hours and noise, and bathrooms above other homes, make careful sealing and protection of finishes especially important.
- Rules in England
- Approved Document K requires safety glass in critical locations in England: glazing in doors and in side panels within 300 mm of a door, up to 1500 mm above floor level, and any glazing in walls or partitions up to 800 mm above floor level.
Guide prices in Gosport
| Typical job | Guide price inc VAT |
|---|---|
| Walk-in shower panel | £395 – £695 |
| Hinged door with in-line panel | £795 – £1,295 |
| Corner or full enclosure | £995 – £1,595 |
Specification choices
Low-iron glass
Glass with less iron, which removes the green edge tint of standard glass and keeps tiles and stone looking their true colour.
Pivot door
A door that swings on pivots set in from its edge, useful where the swing space in front of the shower is limited.
Walk-in wet room panel
A single fixed glass panel with a bracing bar or floor channel, leaving an open entry and no door to clean or adjust.
Shower Screens in Gosport: questions
Can a shower screen be fitted to a stud or plasterboard wall?
Yes, provided the hinges and brackets fix into solid backing. On stud or plasterboard walls that usually means timber noggins behind the fixing points, or suitable heavy-duty fixings where noggins were not fitted. A heavy glass door on weak fixings can drop or pull away, so we check the wall during the survey.
What thickness of glass should a shower screen be?
For frameless screens, 8mm toughened glass suits most doors and enclosures, and 10mm is commonly used for walk-in and wet room panels that stand with little support. Thinner glass is used in framed enclosures where the frame does some of the work. We recommend a thickness at survey based on the panel size and how it is fixed.
Why have a shower screen made to measure instead of buying one?
A made-to-measure screen fits the space exactly, which matters where walls are out of plumb, ceilings slope, trays are non-standard or the opening is an unusual width. Off-the-shelf enclosures rely on adjustment profiles that can leave wide gaps or visible frames. Bespoke glass follows the real shape of the room and keeps sealant lines neat.
How long does it take to fit a shower screen?
Most shower screens are fitted in a single visit once the glass has been made, which usually takes a couple of weeks after measuring. The silicone then needs time to cure, so you should wait before using the shower, and we tell you how long on the day. Your quote confirms the expected timescale.
Do you cover Gosport for shower screens?
Yes. We can quote for shower screens across Gosport and the surrounding Hampshire area, including postcode districts PO12 and PO13, and nearby Portsmouth, Fareham and Ryde. Start with your postcode on the quote form and a glazier will arrange a free survey before giving you a written quote.
Get a written quote in Gosport
Free survey for new glazing, clear guide prices and one point of contact for every glazing job.