Hampshire · England
Shower Screens in Hampshire
Our glaziers fit frameless shower screens in Hampshire using 8mm or 10mm toughened safety glass, with hinge and bracing finishes chosen to match your taps and fittings.
- Guide from £395
- 18 towns covered
- Postcode areas BH, GU, PO, RG, SO, SP
Wet room glass panel across Hampshire
Toughened glass can very occasionally break on its own because of nickel sulphide inclusions. Heat soak testing to BS EN 14179 reduces that risk by breaking flawed panels in the factory, though it cannot remove it completely, and it can be specified for any screen.
Glass thickness is usually 8mm or 10mm for frameless work. 8mm suits most doors and enclosures, while 10mm is commonly used for walk-in and wet room panels that stand with little support and need to stay rigid when knocked or leaned on.
Shower screen glass is toughened safety glass made to BS EN 12150. It is heated and then quickly cooled during manufacture, which makes it much stronger than ordinary glass and means that if it does break, it breaks into small, blunt pieces rather than sharp shards.
Limescale builds up more quickly in hard-water areas. Wiping the glass with a squeegee after each shower, cleaning weekly with a mild non-abrasive cleaner and avoiding scouring pads keeps it clear. Harsh descalers can also dull metal hinges and attack silicone seals.
Towns we cover for shower screens in Hampshire
Choose your town for local details, nearby areas and the postcode districts we cover.
What applies in Hampshire
Approved Document K requires safety glass in critical locations in England: glazing in doors and in side panels within 300 mm of a door, up to 1500 mm above floor level, and any glazing in walls or partitions up to 800 mm above floor level.
Hampshire has its own coastline, so for homes and businesses near the sea, salt air and wind-driven rain are part of the brief. Shower glass sits indoors, so salt air has little effect on it, but coastal homes can have damp, humid air that slows drying. Good bathroom ventilation and a quick squeegee after use help prevent mould on the silicone and marks on the hardware.
Flats often mean carrying large panels up stairs or in small lifts, so panel sizes may need splitting. Building rules on working hours and noise, and bathrooms above other homes, make careful sealing and protection of finishes especially important.
Guide prices
| Typical job | Guide price inc VAT |
|---|---|
| Walk-in shower panel | £395 – £695 |
| Hinged door with in-line panel | £795 – £1,295 |
| Corner or full enclosure | £995 – £1,595 |
Choosing your shower screens
Satin or tinted glass
Satin bands, full satin panels or grey and bronze tints that add privacy or style while still letting light into the shower.
Walk-in wet room panel
A single fixed glass panel with a bracing bar or floor channel, leaving an open entry and no door to clean or adjust.
Pivot door
A door that swings on pivots set in from its edge, useful where the swing space in front of the shower is limited.
Over-bath screen
A fixed or hinged toughened glass panel on the bath edge, made to measure for baths that sit against sloping ceilings or uneven walls.
Shower Screens in Hampshire: questions
Will a frameless shower screen leak?
A well-designed frameless screen contains spray effectively, but it is not completely watertight like a sealed enclosure. Leaks are prevented by the right panel length, a properly falling floor or level tray, drip and sweep seals on doors, and neat silicone on fixed edges. Shower head position matters too, so we look at it during the survey.
What affects the cost of a frameless shower screen?
The main cost drivers are the number and size of panels, glass thickness, the type of hinges, clamps and bracing, and any shaped cuts for sloping ceilings or trays. An easy-clean coating, low-iron or satin glass and special hardware finishes add cost. See the guide prices for typical ranges, and your written quote fixes the price.
Why have a shower screen made to measure instead of buying one?
A made-to-measure screen fits the space exactly, which matters where walls are out of plumb, ceilings slope, trays are non-standard or the opening is an unusual width. Off-the-shelf enclosures rely on adjustment profiles that can leave wide gaps or visible frames. Bespoke glass follows the real shape of the room and keeps sealant lines neat.
When should my shower screen be measured?
Your screen should be measured once the walls are tiled and the tray or wet room floor is finished. The glass is made to follow the exact angles of the finished surfaces, and tiles, adhesive and trims all change the dimensions. If you are mid-renovation, we can advise on fixing positions and backing before tiling starts.
Which parts of Hampshire do you cover for shower screens?
We cover the whole of Hampshire, including Southampton, Portsmouth, Basingstoke, Gosport and Waterlooville, and postcode areas BH, GU, PO, RG, SO, SP. Building rules for shower screens here follow the regulations for England. Enter your postcode on the quote form and we will confirm cover; then a glazier will arrange a free survey before giving you a written quote.
Other glazing services in Hampshire
- Replacement Glass in Hampshire
- Misted Glass Repair in Hampshire
- Emergency Glazing in Hampshire
- Safety Glass in Hampshire
- Window Repairs in Hampshire
- Window Film in Hampshire
- uPVC Windows in Hampshire
- Aluminium Windows in Hampshire
- Sash Windows in Hampshire
- Composite Doors in Hampshire
- Bifold Doors in Hampshire
- Sliding Doors in Hampshire
- Secondary Glazing in Hampshire
- Roof Lanterns in Hampshire
- Glass Balustrades in Hampshire
- Frameless Glass in Hampshire
- Glass Splashbacks in Hampshire
- Bespoke Mirrors in Hampshire
- Glass Roofs in Hampshire
- Shopfront Glazing in Hampshire
- Curtain Walling in Hampshire
- Glass Partitions in Hampshire
- Property Glazing in Hampshire
All glazing in Hampshire · Frameless Shower Screens across the UK
Get a written quote in Hampshire
Free survey for new glazing, clear guide prices and one point of contact for every glazing job.