Rochester · Kent
Shower Screens in Rochester
Awkward alcoves and sloping ceilings in Rochester bathrooms are where made-to-measure shower glass helps, because each panel is cut to the real shape before it is toughened.
- ME1
- ME4
- ME5
- Guide from £395
Bespoke shower enclosure for homes and businesses in Rochester
Screens should be measured after tiling is finished, not from plans. Walls are often out of plumb and floors fall towards the drain, and the glass is made to follow those real angles. Measuring early is a common cause of uneven gaps and leaks.
Shower screen glass is toughened safety glass made to BS EN 12150. It is heated and then quickly cooled during manufacture, which makes it much stronger than ordinary glass and means that if it does break, it breaks into small, blunt pieces rather than sharp shards.
An easy-clean coating is a water-repellent layer bonded to the glass that helps water run off and reduces limescale and soap marks. It does not stop cleaning altogether, and how long it lasts depends on following the care instructions and avoiding abrasive products.
The glass screen stops spray, but it is not the waterproofing. The tanking behind the tiles, the tray or floor fall and the drain do that job. Clear silicone along the glass edges then seals the joints, and it needs time to cure before the shower is used.
What's included
- Made-to-measure toughened safety glass with factory-made holes
- Fixing into solid backing, levelled and aligned
- Survey and measurement once tiling is complete
- Clear silicone sealing to tray, floor and walls
Working in Rochester
- Postcodes covered
- ME1, ME4, ME5 and the surrounding area, including Chatham, Strood and Gillingham
- Coast
- Rochester is about 4 km from the coast or a tidal estuary, so salt air and wind-driven rain are worth planning for. Shower glass sits indoors, so salt air has little effect on it, but coastal homes can have damp, humid air that slows drying. Good bathroom ventilation and a quick squeegee after use help prevent mould on the silicone and marks on the hardware.
- Daylight and sun
- In Rochester the midwinter sun reaches about 15° above the horizon at noon, with roughly 7.6 hours of daylight, rising to about 62° and 16.4 hours in midsummer. Bathrooms with small or north-facing windows benefit from clear or low-iron glass that does not block the daylight available. Where a window looks onto the shower, a satin band or obscure glass gives privacy without making the room feel darker.
- Access and setting
- Older rural homes often have uneven walls, sloping ceilings and timber floors that flex, all of which shape the screen design. Hard water is common in some areas, so an easy-clean coating and regular squeegeeing help keep the glass clear.
- Rules in England
- Approved Document K requires safety glass in critical locations in England: glazing in doors and in side panels within 300 mm of a door, up to 1500 mm above floor level, and any glazing in walls or partitions up to 800 mm above floor level.
Guide prices in Rochester
| Typical job | Guide price inc VAT |
|---|---|
| Walk-in shower panel | £395 – £695 |
| Hinged door with in-line panel | £795 – £1,295 |
| Corner or full enclosure | £995 – £1,595 |
Options to choose between
Hinged door enclosure
A glass door on wall or glass hinges with fixed side panels, suiting alcoves, corners and trays where a fully enclosed shower is wanted.
Low-iron glass
Glass with less iron, which removes the green edge tint of standard glass and keeps tiles and stone looking their true colour.
Over-bath screen
A fixed or hinged toughened glass panel on the bath edge, made to measure for baths that sit against sloping ceilings or uneven walls.
Shower Screens in Rochester: questions
What affects the cost of a frameless shower screen?
The main cost drivers are the number and size of panels, glass thickness, the type of hinges, clamps and bracing, and any shaped cuts for sloping ceilings or trays. An easy-clean coating, low-iron or satin glass and special hardware finishes add cost. See the guide prices for typical ranges, and your written quote fixes the price.
How long does it take to fit a shower screen?
Most shower screens are fitted in a single visit once the glass has been made, which usually takes a couple of weeks after measuring. The silicone then needs time to cure, so you should wait before using the shower, and we tell you how long on the day. Your quote confirms the expected timescale.
Why have a shower screen made to measure instead of buying one?
A made-to-measure screen fits the space exactly, which matters where walls are out of plumb, ceilings slope, trays are non-standard or the opening is an unusual width. Off-the-shelf enclosures rely on adjustment profiles that can leave wide gaps or visible frames. Bespoke glass follows the real shape of the room and keeps sealant lines neat.
What thickness of glass should a shower screen be?
For frameless screens, 8mm toughened glass suits most doors and enclosures, and 10mm is commonly used for walk-in and wet room panels that stand with little support. Thinner glass is used in framed enclosures where the frame does some of the work. We recommend a thickness at survey based on the panel size and how it is fixed.
Do you cover Rochester for shower screens?
Yes. We can quote for shower screens across Rochester and the surrounding Kent area, including postcode districts ME1, ME4 and ME5, and nearby Chatham, Strood and Gillingham. Start with your postcode on the quote form and a glazier will arrange a free survey before giving you a written quote.
Get a written quote in Rochester
Free survey for new glazing, clear guide prices and one point of contact for every glazing job.