Sevenoaks · Kent
Shower Screens in Sevenoaks
Is a chipped or sagging shower door bothering you in Sevenoaks? We can measure, remake and refit the glass, and check the hinges and wall fixings at the same time.
- TN13
- Guide from £395
Walk in shower screen for homes and businesses in Sevenoaks
Limescale builds up more quickly in hard-water areas. Wiping the glass with a squeegee after each shower, cleaning weekly with a mild non-abrasive cleaner and avoiding scouring pads keeps it clear. Harsh descalers can also dull metal hinges and attack silicone seals.
An easy-clean coating is a water-repellent layer bonded to the glass that helps water run off and reduces limescale and soap marks. It does not stop cleaning altogether, and how long it lasts depends on following the care instructions and avoiding abrasive products.
Because toughened glass cannot be cut or drilled after toughening, hinge holes, clamp positions and notches around trays or skirting are formed before the glass goes into the furnace. A panel that does not fit has to be remade, so accurate templating matters.
The price depends mainly on panel sizes, the number of panels, glass thickness, the hinge and bracing hardware, and any cut-outs for sloping ceilings, trays or skirting. Low-iron or satin glass, an easy-clean coating and special finishes add cost. See the guide prices for typical ranges.
What a typical job includes
- Survey and measurement once tiling is complete
- Hinges, clamps, channels or bracing bars in your finish
- Fixing into solid backing, levelled and aligned
- Made-to-measure toughened safety glass with factory-made holes
Working in Sevenoaks
- Postcodes covered
- TN13 and the surrounding area, including Tonbridge, Orpington and Swanley
- Coast
- Sevenoaks is well inland, around 23 km from the nearest coast, so salt exposure is not usually a factor.
- Daylight and sun
- In Sevenoaks the midwinter sun reaches about 15° above the horizon at noon, with roughly 7.6 hours of daylight, rising to about 62° and 16.4 hours in midsummer. Bathrooms with small or north-facing windows benefit from clear or low-iron glass that does not block the daylight available. Where a window looks onto the shower, a satin band or obscure glass gives privacy without making the room feel darker.
- Access and setting
- Older rural homes often have uneven walls, sloping ceilings and timber floors that flex, all of which shape the screen design. Hard water is common in some areas, so an easy-clean coating and regular squeegeeing help keep the glass clear.
- Rules in England
- Approved Document K requires safety glass in critical locations in England: glazing in doors and in side panels within 300 mm of a door, up to 1500 mm above floor level, and any glazing in walls or partitions up to 800 mm above floor level.
Guide prices in Sevenoaks
| Typical job | Guide price inc VAT |
|---|---|
| Walk-in shower panel | £395 – £695 |
| Hinged door with in-line panel | £795 – £1,295 |
| Corner or full enclosure | £995 – £1,595 |
What you can choose
Pivot door
A door that swings on pivots set in from its edge, useful where the swing space in front of the shower is limited.
Easy-clean coating
A water-repellent coating bonded to the glass that helps water bead and run off, reducing limescale and the time spent cleaning.
Low-iron glass
Glass with less iron, which removes the green edge tint of standard glass and keeps tiles and stone looking their true colour.
Shower Screens in Sevenoaks: questions
What thickness of glass should a shower screen be?
For frameless screens, 8mm toughened glass suits most doors and enclosures, and 10mm is commonly used for walk-in and wet room panels that stand with little support. Thinner glass is used in framed enclosures where the frame does some of the work. We recommend a thickness at survey based on the panel size and how it is fixed.
What affects the cost of a frameless shower screen?
The main cost drivers are the number and size of panels, glass thickness, the type of hinges, clamps and bracing, and any shaped cuts for sloping ceilings or trays. An easy-clean coating, low-iron or satin glass and special hardware finishes add cost. See the guide prices for typical ranges, and your written quote fixes the price.
Can a shower screen be fitted to a stud or plasterboard wall?
Yes, provided the hinges and brackets fix into solid backing. On stud or plasterboard walls that usually means timber noggins behind the fixing points, or suitable heavy-duty fixings where noggins were not fitted. A heavy glass door on weak fixings can drop or pull away, so we check the wall during the survey.
Is an easy-clean coating on shower glass worth having?
An easy-clean coating makes water bead and run off, so limescale and soap marks build up more slowly and wiping takes less effort. It is most useful in hard-water areas. It does not replace cleaning, and its life depends on using non-abrasive products, so we give you the care instructions with the screen.
Do you cover Sevenoaks for shower screens?
Yes. We can quote for shower screens across Sevenoaks and the surrounding Kent area, including postcode districts TN13, and nearby Tonbridge, Orpington and Swanley. Start with your postcode on the quote form and a glazier will arrange a free survey before giving you a written quote.
Get a written quote in Sevenoaks
Free survey for new glazing, clear guide prices and one point of contact for every glazing job.