Colne · Lancashire
Shower Screens in Colne
Is a chipped or sagging shower door bothering you in Colne? We can measure, remake and refit the glass, and check the hinges and wall fixings at the same time.
- BB8
- BB9
- Guide from £395
Walk in shower screen in Colne
Screens should be measured after tiling is finished, not from plans. Walls are often out of plumb and floors fall towards the drain, and the glass is made to follow those real angles. Measuring early is a common cause of uneven gaps and leaks.
The glass screen stops spray, but it is not the waterproofing. The tanking behind the tiles, the tray or floor fall and the drain do that job. Clear silicone along the glass edges then seals the joints, and it needs time to cure before the shower is used.
Because toughened glass cannot be cut or drilled after toughening, hinge holes, clamp positions and notches around trays or skirting are formed before the glass goes into the furnace. A panel that does not fit has to be remade, so accurate templating matters.
Hinges carry the full weight of a glass door, so they must fix into solid backing. Tiled plasterboard or stud walls usually need timber noggins or suitable heavy-duty fixings behind the hinge positions, which is easier to arrange before tiling than afterwards.
Included as standard
- Survey and measurement once tiling is complete
- Made-to-measure toughened safety glass with factory-made holes
- Hinges, clamps, channels or bracing bars in your finish
- Clear silicone sealing to tray, floor and walls
Colne at a glance
- Postcodes covered
- BB8, BB9 and the surrounding area, including Nelson (Lancashire), Burnley and Skipton
- Coast
- Colne is well inland, around 48 km from the nearest coast, so salt exposure is not usually a factor.
- Daylight and sun
- In Colne the midwinter sun reaches about 13° above the horizon at noon, with roughly 7.1 hours of daylight, rising to about 60° and 16.9 hours in midsummer. Bathrooms with small or north-facing windows benefit from clear or low-iron glass that does not block the daylight available. Where a window looks onto the shower, a satin band or obscure glass gives privacy without making the room feel darker.
- Access and setting
- Older rural homes often have uneven walls, sloping ceilings and timber floors that flex, all of which shape the screen design. Hard water is common in some areas, so an easy-clean coating and regular squeegeeing help keep the glass clear.
- Rules in England
- Approved Document K requires safety glass in critical locations in England: glazing in doors and in side panels within 300 mm of a door, up to 1500 mm above floor level, and any glazing in walls or partitions up to 800 mm above floor level.
Guide prices in Colne
| Typical job | Guide price inc VAT |
|---|---|
| Walk-in shower panel | £395 – £695 |
| Hinged door with in-line panel | £795 – £1,295 |
| Corner or full enclosure | £995 – £1,595 |
What you can choose
Low-iron glass
Glass with less iron, which removes the green edge tint of standard glass and keeps tiles and stone looking their true colour.
Easy-clean coating
A water-repellent coating bonded to the glass that helps water bead and run off, reducing limescale and the time spent cleaning.
Hinged door enclosure
A glass door on wall or glass hinges with fixed side panels, suiting alcoves, corners and trays where a fully enclosed shower is wanted.
Shower Screens in Colne: questions
What affects the cost of a frameless shower screen?
The main cost drivers are the number and size of panels, glass thickness, the type of hinges, clamps and bracing, and any shaped cuts for sloping ceilings or trays. An easy-clean coating, low-iron or satin glass and special hardware finishes add cost. See the guide prices for typical ranges, and your written quote fixes the price.
Is an easy-clean coating on shower glass worth having?
An easy-clean coating makes water bead and run off, so limescale and soap marks build up more slowly and wiping takes less effort. It is most useful in hard-water areas. It does not replace cleaning, and its life depends on using non-abrasive products, so we give you the care instructions with the screen.
Can a shower screen be fitted to a stud or plasterboard wall?
Yes, provided the hinges and brackets fix into solid backing. On stud or plasterboard walls that usually means timber noggins behind the fixing points, or suitable heavy-duty fixings where noggins were not fitted. A heavy glass door on weak fixings can drop or pull away, so we check the wall during the survey.
How long does it take to fit a shower screen?
Most shower screens are fitted in a single visit once the glass has been made, which usually takes a couple of weeks after measuring. The silicone then needs time to cure, so you should wait before using the shower, and we tell you how long on the day. Your quote confirms the expected timescale.
Do you cover Colne for shower screens?
Yes. We can quote for shower screens across Colne and the surrounding Lancashire area, including postcode districts BB8 and BB9, and nearby Nelson (Lancashire), Burnley and Skipton. Start with your postcode on the quote form and a glazier will arrange a free survey before giving you a written quote.
Get a written quote in Colne
Free survey for new glazing, clear guide prices and one point of contact for every glazing job.