Retford · Nottinghamshire
Shower Screens in Retford
Shower screens in Retford start with a survey once the tiling is finished, followed by a written quote that fixes the price for the glass, hardware and finish shown.
- DN22
- Guide from £395
Bespoke shower enclosure across Retford
Glass thickness is usually 8mm or 10mm for frameless work. 8mm suits most doors and enclosures, while 10mm is commonly used for walk-in and wet room panels that stand with little support and need to stay rigid when knocked or leaned on.
The price depends mainly on panel sizes, the number of panels, glass thickness, the hinge and bracing hardware, and any cut-outs for sloping ceilings, trays or skirting. Low-iron or satin glass, an easy-clean coating and special finishes add cost. See the guide prices for typical ranges.
An easy-clean coating is a water-repellent layer bonded to the glass that helps water run off and reduces limescale and soap marks. It does not stop cleaning altogether, and how long it lasts depends on following the care instructions and avoiding abrasive products.
The glass screen stops spray, but it is not the waterproofing. The tanking behind the tiles, the tray or floor fall and the drain do that job. Clear silicone along the glass edges then seals the joints, and it needs time to cure before the shower is used.
What a typical job includes
- Fixing into solid backing, levelled and aligned
- Survey and measurement once tiling is complete
- Easy-clean coating where specified, plus care advice
- Hinges, clamps, channels or bracing bars in your finish
About Retford for this job
- Postcodes covered
- DN22 and the surrounding area, including Worksop, Gainsborough and Dinnington
- Coast
- Retford is well inland, around 46 km from the nearest coast, so salt exposure is not usually a factor.
- Daylight and sun
- In Retford the midwinter sun reaches about 13° above the horizon at noon, with roughly 7.3 hours of daylight, rising to about 60° and 16.7 hours in midsummer. Bathrooms with small or north-facing windows benefit from clear or low-iron glass that does not block the daylight available. Where a window looks onto the shower, a satin band or obscure glass gives privacy without making the room feel darker.
- Access and setting
- Older rural homes often have uneven walls, sloping ceilings and timber floors that flex, all of which shape the screen design. Hard water is common in some areas, so an easy-clean coating and regular squeegeeing help keep the glass clear.
- Rules in England
- Approved Document K requires safety glass in critical locations in England: glazing in doors and in side panels within 300 mm of a door, up to 1500 mm above floor level, and any glazing in walls or partitions up to 800 mm above floor level.
Guide prices in Retford
| Typical job | Guide price inc VAT |
|---|---|
| Walk-in shower panel | £395 – £695 |
| Hinged door with in-line panel | £795 – £1,295 |
| Corner or full enclosure | £995 – £1,595 |
Choosing your shower screens
Walk-in wet room panel
A single fixed glass panel with a bracing bar or floor channel, leaving an open entry and no door to clean or adjust.
Hinged door enclosure
A glass door on wall or glass hinges with fixed side panels, suiting alcoves, corners and trays where a fully enclosed shower is wanted.
Satin or tinted glass
Satin bands, full satin panels or grey and bronze tints that add privacy or style while still letting light into the shower.
Shower Screens in Retford: questions
What thickness of glass should a shower screen be?
For frameless screens, 8mm toughened glass suits most doors and enclosures, and 10mm is commonly used for walk-in and wet room panels that stand with little support. Thinner glass is used in framed enclosures where the frame does some of the work. We recommend a thickness at survey based on the panel size and how it is fixed.
What affects the cost of a frameless shower screen?
The main cost drivers are the number and size of panels, glass thickness, the type of hinges, clamps and bracing, and any shaped cuts for sloping ceilings or trays. An easy-clean coating, low-iron or satin glass and special hardware finishes add cost. See the guide prices for typical ranges, and your written quote fixes the price.
When should my shower screen be measured?
Your screen should be measured once the walls are tiled and the tray or wet room floor is finished. The glass is made to follow the exact angles of the finished surfaces, and tiles, adhesive and trims all change the dimensions. If you are mid-renovation, we can advise on fixing positions and backing before tiling starts.
Why have a shower screen made to measure instead of buying one?
A made-to-measure screen fits the space exactly, which matters where walls are out of plumb, ceilings slope, trays are non-standard or the opening is an unusual width. Off-the-shelf enclosures rely on adjustment profiles that can leave wide gaps or visible frames. Bespoke glass follows the real shape of the room and keeps sealant lines neat.
Do you cover Retford for shower screens?
Yes. We can quote for shower screens across Retford and the surrounding Nottinghamshire area, including postcode districts DN22, and nearby Worksop, Gainsborough and Dinnington. Start with your postcode on the quote form and a glazier will arrange a free survey before giving you a written quote.
Get a written quote in Retford
Free survey for new glazing, clear guide prices and one point of contact for every glazing job.