Call 0800 088 6248

Pembroke Dock · Dyfed

uPVC Windows in Pembroke Dock

Our glaziers fit uPVC windows across Pembroke Dock, removing the old frames, sealing in the new ones and explaining how the work is approved under building regulations.

  • SA72
  • Guide from £565

Get your free quote

Start with your postcode. A glazier will be in touch to arrange a free survey.

By sending this form you agree we can contact you about this enquiry. See our privacy policy for how we use your details.

No obligation. Prefer to talk? Call 0800 088 6248 or WhatsApp us.

uPVC casement windows in Pembroke Dock

uPVC window frames are made from extruded profiles with several internal chambers that trap air and slow heat loss. Larger frames, and those on exposed elevations, are usually reinforced with steel or aluminium inside the profile so they stay straight and the locks keep engaging properly over the years.

Windows are replaced room by room, so each opening is only exposed for a short spell. A single window is usually changed within a day, and a typical house takes a few days depending on the number of windows, bays and access. Inside, reveals are finished with trims, sealant or filler.

uPVC no longer means white only. Frames can be foiled in woodgrain or solid colours such as grey, black or cream, often outside only with white inside. Foils are bonded at the factory and should be cleaned with a soft cloth and mild detergent, because abrasive pads and solvents mark the surface.

uPVC frames need washing a few times a year with warm soapy water and a drop of light oil on hinges and locking points. Drainage slots along the bottom of the outer frame let rainwater escape, so keep them clear of dirt and leaves to stop water collecting in the cill.

What a typical job includes

  • Written guarantee terms and advice on building regulations sign-off
  • Fitting, packing and fixing into the existing opening
  • Survey and measurement of every opening
  • Sealing inside and out, with trims to make good
Semi-detached house with white uPVC windows and bay windows

About Pembroke Dock for this job

Postcodes covered
SA72 and the surrounding area, including Milford Haven, Haverfordwest and Tenby
Coast
Pembroke Dock is about 2 km from the coast or a tidal estuary, so salt air and wind-driven rain are worth planning for. Near the coast, salt spray and wind-driven rain test seals, drainage and hardware. uPVC itself does not corrode, but stainless or coated locking parts, well-sealed joints around the frame and clear drainage slots matter, and exposed elevations may need frames with higher weather ratings.
Daylight and sun
In Pembroke Dock the midwinter sun reaches about 15° above the horizon at noon, with roughly 7.6 hours of daylight, rising to about 62° and 16.4 hours in midsummer. uPVC frames are bulkier than aluminium, so they take a little more glass area from small windows. On south and west elevations, solar-control or neutral low-E glass limits overheating, while north-facing rooms benefit from high light-transmission glass and warm-edge spacers that reduce condensation.
Access and setting
Older rural cottages often have irregular openings, thick walls and timber lintels, so every frame is measured individually and the support above each opening is checked. Exposed hillside and open-field sites benefit from reinforced frames and careful sealing against driving rain.
Rules in Wales
In Wales, Approved Document N covers safety glazing: safety glass is needed in and around doors and in low-level glazing where people could walk into it.

Guide prices in Pembroke Dock

Guide prices inc VAT for typical jobs. Remote and island locations are quoted by arrangement. Your written quote fixes the price after measuring.
Typical jobGuide price inc VAT
Casement window, 900 × 1050 mm£565 – £725
Casement window, 1200 × 1200 mm£665 – £855
Large window, 1800 × 1200 mm£805 – £995
Anthracite or woodgrain, 1200 × 1200 mm£785 – £995

Get a guide price for your size

Listed buildings in Wales need listed building consent for most changes to historic windows; Cadw publishes guidance on looking after traditional windows.

What you can choose

Woodgrain and colour foils

Grey, black, cream or woodgrain foils on one or both faces, so the frames can match a door or suit an older house.

uPVC sliding sash

Vertical sliders that mimic traditional box sashes, using spring balances instead of weights, where planning rules allow uPVC.

Double or triple glazing

Low-E double glazing suits most homes; triple glazing adds a third pane for lower heat loss and quieter rooms, but units are heavier.

uPVC Windows in Pembroke Dock: questions

What guarantee comes with new uPVC windows?

Manufacturer guarantees apply to new frames, sealed units and hardware, and the terms are confirmed in writing. Guarantee terms for the installation are set out in writing with your quote, so you know what is covered and for how long before you commit. Keep this paperwork with your building regulations certificate, because buyers' solicitors usually ask for both.

How long does it take to fit uPVC windows?

Most single windows are changed within a day, and a typical house usually takes a few days. Bays, large picture windows and openings that need a tower or scaffold take longer. Manufacturing comes first, because every frame is made to the survey measurements, and the lead time is confirmed with your quote.

Can I fit uPVC windows myself?

You can, but the work still has to meet building regulations. In England and Wales, without an installer registered with a competent person scheme you need building control approval and inspection. Accurate measuring, correct packing, fixing and sealing all affect weather performance and how the locks work, and mistakes are hard to put right because frames are made to size and cannot be returned.

Should I choose double or triple glazing?

Well-specified double glazing with low-E glass and warm-edge spacers can meet the energy standard for replacement windows, and the certified rating confirms it. Triple glazing adds a third pane, which helps on cold, noisy or north-facing elevations, but the units are heavier and need frames designed for them. We can quote both so you can compare.

Do you cover Pembroke Dock for uPVC windows?

Yes. We can quote for uPVC windows across Pembroke Dock and the surrounding Dyfed area, including postcode districts SA72, and nearby Milford Haven, Haverfordwest and Tenby. Start with your postcode on the quote form and a glazier will arrange a free survey before giving you a written quote.

Get a written quote in Pembroke Dock

Free survey for new glazing, clear guide prices and one point of contact for every glazing job.

CallGet a quote