Call 0800 088 6248

Faversham · Kent

uPVC Windows in Faversham

If your windows in Faversham no longer lock, let rain in or stick when opened, we can survey them and quote for replacement uPVC frames.

  • ME13
  • Guide from £565

Get your free quote

Start with your postcode. A glazier will be in touch to arrange a free survey.

By sending this form you agree we can contact you about this enquiry. See our privacy policy for how we use your details.

No obligation. Prefer to talk? Call 0800 088 6248 or WhatsApp us.

uPVC casement windows for homes and businesses in Faversham

In England, Approved Document L sets the standard for a replacement window in an existing home: a U-value of 1.4 W/m²K or better, or a Window Energy Rating of band B or above. The new window should also be no worse than the one it replaces. The other UK nations set their own figures.

Low-level glass needs safety glazing. In England, Approved Document K treats any glazed panel within 800mm of the floor as a critical location, so a full-height pane, a low picture window or glass beside a door usually needs toughened or laminated glass, permanently marked to show its classification.

When windows are replaced in England, Approved Document F expects the room's ventilation to be no worse than before. That usually means trickle vents in the head of the new frames, sized to the room, so the glazier records whether the old windows had vents and specifies the new ones to suit.

uPVC no longer means white only. Frames can be foiled in woodgrain or solid colours such as grey, black or cream, often outside only with white inside. Foils are bonded at the factory and should be cleaned with a soft cloth and mild detergent, because abrasive pads and solvents mark the surface.

What's included

  • Survey and measurement of every opening
  • Sealing inside and out, with trims to make good
  • Fitting, packing and fixing into the existing opening
  • Removal and disposal of the old windows
Semi-detached house with white uPVC windows and bay windows

About Faversham for this job

Postcodes covered
ME13 and the surrounding area, including Whitstable, Sittingbourne and Canterbury
Coast
Faversham is about 4 km from the coast or a tidal estuary, so salt air and wind-driven rain are worth planning for. Near the coast, salt spray and wind-driven rain test seals, drainage and hardware. uPVC itself does not corrode, but stainless or coated locking parts, well-sealed joints around the frame and clear drainage slots matter, and exposed elevations may need frames with higher weather ratings.
Daylight and sun
In Faversham the midwinter sun reaches about 15° above the horizon at noon, with roughly 7.6 hours of daylight, rising to about 62° and 16.4 hours in midsummer. uPVC frames are bulkier than aluminium, so they take a little more glass area from small windows. On south and west elevations, solar-control or neutral low-E glass limits overheating, while north-facing rooms benefit from high light-transmission glass and warm-edge spacers that reduce condensation.
Access and setting
Older rural cottages often have irregular openings, thick walls and timber lintels, so every frame is measured individually and the support above each opening is checked. Exposed hillside and open-field sites benefit from reinforced frames and careful sealing against driving rain.
Rules in England
Approved Document K requires safety glass in critical locations in England: glazing in doors and in side panels within 300 mm of a door, up to 1500 mm above floor level, and any glazing in walls or partitions up to 800 mm above floor level.

Guide prices in Faversham

Guide prices inc VAT for typical jobs. Remote and island locations are quoted by arrangement. Your written quote fixes the price after measuring.
Typical jobGuide price inc VAT
Casement window, 900 × 1050 mm£565 – £725
Casement window, 1200 × 1200 mm£665 – £855
Large window, 1800 × 1200 mm£805 – £995
Anthracite or woodgrain, 1200 × 1200 mm£785 – £995

Get a guide price for your size

Approved Document B covers escape windows. Where an existing window is an escape route, typically in first-floor bedrooms, its replacement should give at least the same escape opening as before.

Choosing your uPVC windows

Obscure and acoustic glass

Patterned or satin glass for bathrooms and street-facing rooms, and laminated acoustic glass to reduce traffic noise.

Double or triple glazing

Low-E double glazing suits most homes; triple glazing adds a third pane for lower heat loss and quieter rooms, but units are heavier.

Tilt and turn

Opens inwards from the side for cleaning or escape, or tilts from the top for secure ventilation; practical for flats and upper floors.

uPVC Windows in Faversham: questions

Should I choose double or triple glazing?

Well-specified double glazing with low-E glass and warm-edge spacers can meet the energy standard for replacement windows, and the certified rating confirms it. Triple glazing adds a third pane, which helps on cold, noisy or north-facing elevations, but the units are heavier and need frames designed for them. We can quote both so you can compare.

Can uPVC windows be fitted in a conservation area or listed building?

Sometimes, but consent may be needed first. Listed buildings need listed building consent for significant works, and conservation areas or Article 4 directions often restrict changes to front windows. Woodgrain foils or uPVC sliding sashes can occasionally satisfy a planning officer. Check with your council before ordering; the council can tell you what an application needs, and we can provide product details and specifications to support it.

Do I need building regulations approval for replacement uPVC windows?

Yes. In England, replacement windows are controlled fittings, so the work must meet building regulations. An installer registered with a competent person scheme such as FENSA or Certass can self-certify the work and you receive a certificate; otherwise approval comes from building control. Wales, Scotland and Northern Ireland run their own systems, and we explain which route applies before work starts.

How long does it take to fit uPVC windows?

Most single windows are changed within a day, and a typical house usually takes a few days. Bays, large picture windows and openings that need a tower or scaffold take longer. Manufacturing comes first, because every frame is made to the survey measurements, and the lead time is confirmed with your quote.

Do you cover Faversham for uPVC windows?

Yes. We can quote for uPVC windows across Faversham and the surrounding Kent area, including postcode districts ME13, and nearby Whitstable, Sittingbourne and Canterbury. Start with your postcode on the quote form and a glazier will arrange a free survey before giving you a written quote.

Get a written quote in Faversham

Free survey for new glazing, clear guide prices and one point of contact for every glazing job.

CallGet a quote