Sevenoaks · Kent
uPVC Windows in Sevenoaks
Our glaziers fit uPVC windows across Sevenoaks, removing the old frames, sealing in the new ones and explaining how the work is approved under building regulations.
- TN13
- Guide from £565
About uPVC double glazed windows in Sevenoaks
uPVC window frames are made from extruded profiles with several internal chambers that trap air and slow heat loss. Larger frames, and those on exposed elevations, are usually reinforced with steel or aluminium inside the profile so they stay straight and the locks keep engaging properly over the years.
Some upstairs windows are escape routes in a fire. In England, the Approved Document B guidance for an escape window is a clear openable area of at least 0.33 m², at least 450mm high and 450mm wide, with the bottom of the opening no more than 1100mm above the floor.
When windows are replaced in England, Approved Document F expects the room's ventilation to be no worse than before. That usually means trickle vents in the head of the new frames, sized to the room, so the glazier records whether the old windows had vents and specifies the new ones to suit.
Modern uPVC casements use multi-point espagnolette locks that engage keeps along the frame, internally beaded glass so units cannot be removed from outside, and key-locking handles. PAS 24 is the security standard expected for easily accessible windows in new homes in England, and it is a sensible benchmark for ground-floor replacements.
What you get
- Fitting, packing and fixing into the existing opening
- Removal and disposal of the old windows
- Made-to-measure frames with sealed double glazed units
- Written guarantee terms and advice on building regulations sign-off
About Sevenoaks for this job
- Postcodes covered
- TN13 and the surrounding area, including Tonbridge, Orpington and Swanley
- Coast
- Sevenoaks is well inland, around 23 km from the nearest coast, so salt exposure is not usually a factor.
- Daylight and sun
- In Sevenoaks the midwinter sun reaches about 15° above the horizon at noon, with roughly 7.6 hours of daylight, rising to about 62° and 16.4 hours in midsummer. uPVC frames are bulkier than aluminium, so they take a little more glass area from small windows. On south and west elevations, solar-control or neutral low-E glass limits overheating, while north-facing rooms benefit from high light-transmission glass and warm-edge spacers that reduce condensation.
- Access and setting
- Older rural cottages often have irregular openings, thick walls and timber lintels, so every frame is measured individually and the support above each opening is checked. Exposed hillside and open-field sites benefit from reinforced frames and careful sealing against driving rain.
- Rules in England
- Approved Document K requires safety glass in critical locations in England: glazing in doors and in side panels within 300 mm of a door, up to 1500 mm above floor level, and any glazing in walls or partitions up to 800 mm above floor level.
Guide prices in Sevenoaks
| Typical job | Guide price inc VAT |
|---|---|
| Casement window, 900 × 1050 mm | £565 – £725 |
| Casement window, 1200 × 1200 mm | £665 – £855 |
| Large window, 1800 × 1200 mm | £805 – £995 |
| Anthracite or woodgrain, 1200 × 1200 mm | £785 – £995 |
Get a guide price for your size
Replacing windows and doors with similar ones is usually permitted development for houses in England. Flats, listed buildings and homes in conservation areas or covered by an Article 4 direction can need permission, so check with the council first.
Choosing your uPVC windows
Double or triple glazing
Low-E double glazing suits most homes; triple glazing adds a third pane for lower heat loss and quieter rooms, but units are heavier.
Woodgrain and colour foils
Grey, black, cream or woodgrain foils on one or both faces, so the frames can match a door or suit an older house.
Casement windows
Side-hung or top-hung sashes on friction hinges, suiting most houses, with easy-clean hinges that let upper-floor glass be cleaned from inside.
uPVC Windows in Sevenoaks: questions
Do new uPVC windows need trickle vents?
In England, usually yes. Approved Document F expects ventilation after window replacement to be no worse than before, which normally means trickle vents in the new frames. Our glaziers record the existing ventilation at survey and specify vents to suit each room. Rules in the other UK nations differ, so the detail is confirmed for your address.
How long does it take to fit uPVC windows?
Most single windows are changed within a day, and a typical house usually takes a few days. Bays, large picture windows and openings that need a tower or scaffold take longer. Manufacturing comes first, because every frame is made to the survey measurements, and the lead time is confirmed with your quote.
Can uPVC windows be fitted in a conservation area or listed building?
Sometimes, but consent may be needed first. Listed buildings need listed building consent for significant works, and conservation areas or Article 4 directions often restrict changes to front windows. Woodgrain foils or uPVC sliding sashes can occasionally satisfy a planning officer. Check with your council before ordering; the council can tell you what an application needs, and we can provide product details and specifications to support it.
Should I choose double or triple glazing?
Well-specified double glazing with low-E glass and warm-edge spacers can meet the energy standard for replacement windows, and the certified rating confirms it. Triple glazing adds a third pane, which helps on cold, noisy or north-facing elevations, but the units are heavier and need frames designed for them. We can quote both so you can compare.
Do you cover Sevenoaks for uPVC windows?
Yes. We can quote for uPVC windows across Sevenoaks and the surrounding Kent area, including postcode districts TN13, and nearby Tonbridge, Orpington and Swanley. Start with your postcode on the quote form and a glazier will arrange a free survey before giving you a written quote.
Get a written quote in Sevenoaks
Free survey for new glazing, clear guide prices and one point of contact for every glazing job.