Bournemouth · Dorset
Window Repairs in Bournemouth
Windows in Bournemouth that will not open, close or lock can usually be repaired by replacing the hinge, handle or lock rather than the whole window.
- BH2
- BH4
- BH1
- Guide from £65
Window handle replacement in Bournemouth: what to know
A door that drags on the threshold, catches the frame or needs lifting to lock has usually dropped. Doors can often be adjusted using the hinges and by repacking the glass or panel so the door sits square again. Adjustment is usually tried before replacing parts.
A uPVC or composite door with a multipoint lock has one central gearbox that drives hooks, rollers or bolts along the door edge. A failed gearbox can leave the door stuck locked or unable to lock. In many cases only the gearbox needs replacing, not the whole strip.
Sash windows run on cords and weights or on spring balances. A broken cord leaves the sash heavy or loose, and a weak balance makes it slide down. Replacing cords, rehanging the sash and easing the beads can make a sash window run smoothly again.
Draught seals and gaskets compress and shrink over time, letting in cold air and noise. Replacing them with a matching profile restores the seal without changing the window. The glazier checks the gasket type, as frames from different makers often use different profiles.
What you get
- Removal of old parts and packaging
- Written quote fixing the price for parts and work
- Adjustment of dropped or sticking doors and sashes
- Matched replacement hinges, stays, handles or locks
Bournemouth at a glance
- Postcodes covered
- BH2, BH4, BH1 and the surrounding area, including Christchurch, Poole and Ferndown
- Coast
- Bournemouth is about 1 km from the coast or a tidal estuary, so salt air and wind-driven rain are worth planning for. Near the coast, salt air corrodes window and door hardware more quickly, especially hinges, keeps and lock mechanisms. Stainless steel friction stays and corrosion-resistant hardware last longer, and regular cleaning and lubrication help keep moving parts free.
- Daylight and sun
- In Bournemouth the midwinter sun reaches about 16° above the horizon at noon, with roughly 7.7 hours of daylight, rising to about 63° and 16.3 hours in midsummer. Windows and doors on sunny elevations expand and contract more with temperature, which can make them stick in summer and catch the frame. Dark-coloured doors absorb more heat, so hinge adjustment may be needed after hot spells.
- Access and setting
- In flats and terraced homes, working on upper-floor windows may need to be done from inside. Security matters on street-facing doors, so anti-snap cylinders and secure handles are worth considering. Parking near the property can affect access.
- Rules in England
- Approved Document Q applies to new homes in England, where doors and windows are expected to meet PAS 24 or an equivalent standard. It does not apply to replacements in existing homes, but PAS 24 products are still a sensible choice.
Guide prices in Bournemouth
| Typical job | Guide price inc VAT |
|---|---|
| Replace a pair of window hinges | £95 – £145 |
| Replace a window locking mechanism | £125 – £195 |
| Replace a door multipoint lock | £195 – £325 |
| Fit an anti-snap cylinder | £65 – £115 |
Get a guide price for your size
Approved Document B covers escape windows. Where an existing window is an escape route, typically in first-floor bedrooms, its replacement should give at least the same escape opening as before.
What you can choose
Multipoint door lock
A new gearbox or full locking strip for uPVC and composite doors that stick, will not lock or have a loose handle.
Espagnolette lock and gearbox
Replacement locking bar or gearbox for windows that will not lock, have a spinning handle or feel stiff to operate.
Friction stay replacement
New hinges for uPVC and aluminium casement windows, matched for length and stack height, including egress stays for escape windows.
Window Repairs in Bournemouth: questions
Is my euro cylinder lock secure?
Many older euro cylinders can be snapped, which lets an intruder open the door. Look for markings on the cylinder face. A TS 007 3-star mark, or certification to Sold Secure SS312 Diamond, shows the cylinder has been tested to resist snapping. The glazier can check and replace the cylinder with one cut to fit your door.
My door handle spins and the door will not lock. What is wrong?
A handle that spins without moving the lock usually means the gearbox inside the door has failed, or the spindle connecting handle and gearbox has broken. The gearbox can often be replaced on its own. If the door is stuck locked, the glazier can usually open it without damaging the frame before fitting the new part.
How can I stop draughts from my existing windows?
Draughts often come from worn gaskets, a sash that has dropped or keeps that no longer pull the sash tight. Replacing the gaskets with a matching profile and adjusting the keeps or hinges usually fixes the problem. If draughts come through the frame or glass seals, the glazier will say what else needs attention.
Can you find parts for old or discontinued windows?
Often, yes. Many hinges, locks and gearboxes are made to common sizes, and modern equivalents exist for many older designs. The glazier measures key dimensions such as backset, length and stack height. If an exact match is not available, the quote will explain the nearest option and any adaptation needed.
Do you cover Bournemouth for window repairs?
Yes. We can quote for window repairs across Bournemouth and the surrounding Dorset area, including postcode districts BH2, BH4 and BH1, and nearby Christchurch, Poole and Ferndown. Start with your postcode on the quote form and a glazier will talk through the job, explain any charge before booking and give you a written quote.
Get a written quote in Bournemouth
Clear guide prices, any charge explained before booking, and one point of contact for every glazing job.