Christchurch · Dorset
Window Repairs in Christchurch
Windows in Christchurch that will not open, close or lock can usually be repaired by replacing the hinge, handle or lock rather than the whole window.
- BH6
- BH23
- BH7
- Guide from £65
Dropped uPVC door repair for homes and businesses in Christchurch
The cost of a window or door repair depends on the part needed, whether it is a standard or discontinued design, how easy it is to identify the make, the number of windows or doors, and access. Discontinued hardware sometimes needs a modern equivalent and adaptation to fit.
In England, upper-floor windows serving bedrooms often double as escape windows. Replacing hinges with restricted-opening stays can reduce the opening below what is needed. Egress hinges give a wider opening for escape, so the glazier checks which type the window needs before fitting.
Sash windows run on cords and weights or on spring balances. A broken cord leaves the sash heavy or loose, and a weak balance makes it slide down. Replacing cords, rehanging the sash and easing the beads can make a sash window run smoothly again.
Repairs usually take a single visit when the part can be identified and is carried on the van. Unusual or discontinued parts may need ordering. The glazier then returns to fit them, and in the meantime can usually leave the window or door secure and working.
Included as standard
- Matched replacement hinges, stays, handles or locks
- Survey and diagnosis of the faulty part
- Check that windows and doors lock and seal
- Removal of old parts and packaging
Working in Christchurch
- Postcodes covered
- BH6, BH23, BH7 and the surrounding area, including Bournemouth, New Milton and Ferndown
- Coast
- Christchurch is about 1 km from the coast or a tidal estuary, so salt air and wind-driven rain are worth planning for. Near the coast, salt air corrodes window and door hardware more quickly, especially hinges, keeps and lock mechanisms. Stainless steel friction stays and corrosion-resistant hardware last longer, and regular cleaning and lubrication help keep moving parts free.
- Daylight and sun
- In Christchurch the midwinter sun reaches about 16° above the horizon at noon, with roughly 7.7 hours of daylight, rising to about 63° and 16.3 hours in midsummer. Windows and doors on sunny elevations expand and contract more with temperature, which can make them stick in summer and catch the frame. Dark-coloured doors absorb more heat, so hinge adjustment may be needed after hot spells.
- Access and setting
- Older rural homes may have timber casements, sash windows or doors with discontinued hardware, so parts may need matching or adapting. Exposed sites put more strain on hinges and seals, and outbuildings often benefit from upgraded locks.
- Rules in England
- Approved Document Q applies to new homes in England, where doors and windows are expected to meet PAS 24 or an equivalent standard. It does not apply to replacements in existing homes, but PAS 24 products are still a sensible choice.
Guide prices in Christchurch
| Typical job | Guide price inc VAT |
|---|---|
| Replace a pair of window hinges | £95 – £145 |
| Replace a window locking mechanism | £125 – £195 |
| Replace a door multipoint lock | £195 – £325 |
| Fit an anti-snap cylinder | £65 – £115 |
Get a guide price for your size
Approved Document B covers escape windows. Where an existing window is an escape route, typically in first-floor bedrooms, its replacement should give at least the same escape opening as before.
Choosing your window repairs
Sash cords and balances
New cords, weights or spring balances for sash windows that drop, stick or will not stay in position.
Friction stay replacement
New hinges for uPVC and aluminium casement windows, matched for length and stack height, including egress stays for escape windows.
Gaskets and draught seals
Replacement seals matched to the frame profile to stop draughts, rattles and noise around opening windows and doors.
Window Repairs in Christchurch: questions
How do I look after window and door hardware?
Clean dirt from tracks, keeps and hinges, then apply a light machine oil or silicone spray to moving parts once or twice a year. Keep frame drainage slots clear. Do not force handles that feel stiff, as this can break gearboxes. Report a dropping door or sticking handle early, as small adjustments are easier than replacing parts.
Can you repair a uPVC window that will not close properly?
Usually, yes. Windows that will not close are most often caused by worn or bent friction stays, a sash that has dropped, or a locking cam catching the keep. The glazier identifies the fault, then replaces the hinges, adjusts the keeps or repacks the sash so it closes and locks properly again, keeping the existing frame and glass.
Why has my uPVC door dropped and can it be fixed?
Doors drop when hinges wear or loosen, or when the glass or panel slips inside the door and stops supporting it square. Signs include dragging on the threshold and needing to lift the handle hard to lock. Most dropped doors can be fixed by adjusting the hinges and repacking the glass or panel, without replacing the door.
Can you find parts for old or discontinued windows?
Often, yes. Many hinges, locks and gearboxes are made to common sizes, and modern equivalents exist for many older designs. The glazier measures key dimensions such as backset, length and stack height. If an exact match is not available, the quote will explain the nearest option and any adaptation needed.
Do you cover Christchurch for window repairs?
Yes. We can quote for window repairs across Christchurch and the surrounding Dorset area, including postcode districts BH6, BH23 and BH7, and nearby Bournemouth, New Milton and Ferndown. Start with your postcode on the quote form and a glazier will talk through the job, explain any charge before booking and give you a written quote.
Get a written quote in Christchurch
Clear guide prices, any charge explained before booking, and one point of contact for every glazing job.