Edinburgh · Edinburgh & the Lothians
Window Repairs in Edinburgh
Sash cords, window restrictors and broken handles in Edinburgh can usually be repaired on a single visit when the parts are standard and available.
- EH2
- EH3
- EH1
- Guide from £65
uPVC window repairs in Edinburgh
Simple care keeps hardware working longer. Clean tracks and keeps, then apply a light lubricant to moving parts once or twice a year. Keep drainage slots clear. Avoid slamming doors or forcing handles, as this strains gearboxes and can cause a door to drop over time.
A door that drags on the threshold, catches the frame or needs lifting to lock has usually dropped. Doors can often be adjusted using the hinges and by repacking the glass or panel so the door sits square again. Adjustment is usually tried before replacing parts.
Most modern windows use an espagnolette lock: a metal bar in the sash edge that moves locking cams into keeps on the frame when the handle turns. If the handle feels stiff or spins freely, the gearbox or bar may be worn, rather than the handle itself.
Euro cylinders are the key barrels in most uPVC and composite doors. Standard cylinders can be vulnerable to lock snapping. Cylinders tested to TS 007 with a 3-star rating, or certified to Sold Secure SS312 Diamond, are designed to resist this type of attack.
Included as standard
- Written quote fixing the price for parts and work
- Survey and diagnosis of the faulty part
- Matched replacement hinges, stays, handles or locks
- Adjustment of dropped or sticking doors and sashes
About Edinburgh for this job
- Postcodes covered
- EH2, EH3, EH1 and the surrounding area, including Musselburgh, Dalkeith and Bonnyrigg
- Coast
- Edinburgh is about 4 km from the coast or a tidal estuary, so salt air and wind-driven rain are worth planning for. Near the coast, salt air corrodes window and door hardware more quickly, especially hinges, keeps and lock mechanisms. Stainless steel friction stays and corrosion-resistant hardware last longer, and regular cleaning and lubrication help keep moving parts free.
- Daylight and sun
- In Edinburgh the midwinter sun reaches about 11° above the horizon at noon, with roughly 6.7 hours of daylight, rising to about 58° and 17.3 hours in midsummer. Windows and doors on sunny elevations expand and contract more with temperature, which can make them stick in summer and catch the frame. Dark-coloured doors absorb more heat, so hinge adjustment may be needed after hot spells.
- Access and setting
- In flats and terraced homes, working on upper-floor windows may need to be done from inside. Security matters on street-facing doors, so anti-snap cylinders and secure handles are worth considering. Parking near the property can affect access.
- Rules in Scotland
- Security standards for doors and windows apply to new homes in Scotland; for replacements, PAS 24 products are a sensible choice.
Guide prices in Edinburgh
| Typical job | Guide price inc VAT |
|---|---|
| Replace a pair of window hinges | £95 – £145 |
| Replace a window locking mechanism | £125 – £195 |
| Replace a door multipoint lock | £195 – £325 |
| Fit an anti-snap cylinder | £65 – £115 |
Get a guide price for your size
Where a window provides an escape route, its replacement in Scotland should give at least the same escape opening as before.
Specification choices
Friction stay replacement
New hinges for uPVC and aluminium casement windows, matched for length and stack height, including egress stays for escape windows.
Anti-snap euro cylinder
A cylinder tested to resist snapping, such as TS 007 3-star or Sold Secure SS312 Diamond, cut to fit your door.
Espagnolette lock and gearbox
Replacement locking bar or gearbox for windows that will not lock, have a spinning handle or feel stiff to operate.
Window Repairs in Edinburgh: questions
Why has my uPVC door dropped and can it be fixed?
Doors drop when hinges wear or loosen, or when the glass or panel slips inside the door and stops supporting it square. Signs include dragging on the threshold and needing to lift the handle hard to lock. Most dropped doors can be fixed by adjusting the hinges and repacking the glass or panel, without replacing the door.
How can I stop draughts from my existing windows?
Draughts often come from worn gaskets, a sash that has dropped or keeps that no longer pull the sash tight. Replacing the gaskets with a matching profile and adjusting the keeps or hinges usually fixes the problem. If draughts come through the frame or glass seals, the glazier will say what else needs attention.
My door handle spins and the door will not lock. What is wrong?
A handle that spins without moving the lock usually means the gearbox inside the door has failed, or the spindle connecting handle and gearbox has broken. The gearbox can often be replaced on its own. If the door is stuck locked, the glazier can usually open it without damaging the frame before fitting the new part.
Can you repair a uPVC window that will not close properly?
Usually, yes. Windows that will not close are most often caused by worn or bent friction stays, a sash that has dropped, or a locking cam catching the keep. The glazier identifies the fault, then replaces the hinges, adjusts the keeps or repacks the sash so it closes and locks properly again, keeping the existing frame and glass.
Do you cover Edinburgh for window repairs?
Yes. We can quote for window repairs across Edinburgh and the surrounding Edinburgh & the Lothians area, including postcode districts EH2, EH3 and EH1, and nearby Musselburgh, Dalkeith and Bonnyrigg. Start with your postcode on the quote form and a glazier will talk through the job, explain any charge before booking and give you a written quote.
Get a written quote in Edinburgh
Clear guide prices, any charge explained before booking, and one point of contact for every glazing job.