Kensington · Greater London
Window Repairs in Kensington
Sash cords, window restrictors and broken handles in Kensington can usually be repaired on a single visit when the parts are standard and available.
- SW3
- SW5
- SW7
- SW10
- W8
- W10
- Guide from £65
uPVC window repairs across Kensington
A door that drags on the threshold, catches the frame or needs lifting to lock has usually dropped. Doors can often be adjusted using the hinges and by repacking the glass or panel so the door sits square again. Adjustment is usually tried before replacing parts.
Simple care keeps hardware working longer. Clean tracks and keeps, then apply a light lubricant to moving parts once or twice a year. Keep drainage slots clear. Avoid slamming doors or forcing handles, as this strains gearboxes and can cause a door to drop over time.
Friction stays are the hinges on most uPVC and aluminium casement windows. When the sliding shoe wears or the arms bend, the window drops, binds or will not stay open. Replacements must match the stay's length, stack height and type, which the glazier measures before ordering.
Repairs usually take a single visit when the part can be identified and is carried on the van. Unusual or discontinued parts may need ordering. The glazier then returns to fit them, and in the meantime can usually leave the window or door secure and working.
What a typical job includes
- Survey and diagnosis of the faulty part
- Matched replacement hinges, stays, handles or locks
- Check that windows and doors lock and seal
- Written quote fixing the price for parts and work
Kensington at a glance
- Postcodes covered
- SW3, SW5, SW7, SW10, W8, W10, W11 and the surrounding area, including Shepherds Bush, Hammersmith and Chelsea
- Coast
- Kensington is well inland, around 39 km from the nearest coast, so salt exposure is not usually a factor.
- Daylight and sun
- In Kensington the midwinter sun reaches about 15° above the horizon at noon, with roughly 7.6 hours of daylight, rising to about 62° and 16.4 hours in midsummer. Windows and doors on sunny elevations expand and contract more with temperature, which can make them stick in summer and catch the frame. Dark-coloured doors absorb more heat, so hinge adjustment may be needed after hot spells.
- Access and setting
- In flats and terraced homes, working on upper-floor windows may need to be done from inside. Security matters on street-facing doors, so anti-snap cylinders and secure handles are worth considering. Parking near the property can affect access.
- Rules in England
- Approved Document Q applies to new homes in England, where doors and windows are expected to meet PAS 24 or an equivalent standard. It does not apply to replacements in existing homes, but PAS 24 products are still a sensible choice.
Guide prices in Kensington
| Typical job | Guide price inc VAT |
|---|---|
| Replace a pair of window hinges | £95 – £145 |
| Replace a window locking mechanism | £125 – £195 |
| Replace a door multipoint lock | £195 – £325 |
| Fit an anti-snap cylinder | £65 – £115 |
Get a guide price for your size
Approved Document B covers escape windows. Where an existing window is an escape route, typically in first-floor bedrooms, its replacement should give at least the same escape opening as before.
What you can choose
Friction stay replacement
New hinges for uPVC and aluminium casement windows, matched for length and stack height, including egress stays for escape windows.
Multipoint door lock
A new gearbox or full locking strip for uPVC and composite doors that stick, will not lock or have a loose handle.
Espagnolette lock and gearbox
Replacement locking bar or gearbox for windows that will not lock, have a spinning handle or feel stiff to operate.
Window Repairs in Kensington: questions
How do I look after window and door hardware?
Clean dirt from tracks, keeps and hinges, then apply a light machine oil or silicone spray to moving parts once or twice a year. Keep frame drainage slots clear. Do not force handles that feel stiff, as this can break gearboxes. Report a dropping door or sticking handle early, as small adjustments are easier than replacing parts.
How can I stop draughts from my existing windows?
Draughts often come from worn gaskets, a sash that has dropped or keeps that no longer pull the sash tight. Replacing the gaskets with a matching profile and adjusting the keeps or hinges usually fixes the problem. If draughts come through the frame or glass seals, the glazier will say what else needs attention.
What does it cost to replace a window hinge or door lock?
The cost depends on the part, whether it is standard or discontinued, how many windows or doors need work, and access. Gearboxes and full multipoint strips cost more than a single handle or cylinder. See the guide prices for typical repairs, then get a written quote once the glazier has identified the exact part needed.
Can you find parts for old or discontinued windows?
Often, yes. Many hinges, locks and gearboxes are made to common sizes, and modern equivalents exist for many older designs. The glazier measures key dimensions such as backset, length and stack height. If an exact match is not available, the quote will explain the nearest option and any adaptation needed.
Do you cover Kensington for window repairs?
Yes. We can quote for window repairs across Kensington and the surrounding Greater London area, including postcode districts SW3, SW5, SW7, SW10 and W8, and nearby Shepherds Bush, Hammersmith and Chelsea. Start with your postcode on the quote form and a glazier will talk through the job, explain any charge before booking and give you a written quote.
Get a written quote in Kensington
Clear guide prices, any charge explained before booking, and one point of contact for every glazing job.