Fareham · Hampshire
Window Repairs in Fareham
A spinning handle or stuck lock in Fareham is often a failed gearbox, and we can quote to replace the part and keep your existing door.
- PO16
- PO15
- PO14
- Guide from £65
uPVC window repairs across Fareham
Most modern windows use an espagnolette lock: a metal bar in the sash edge that moves locking cams into keeps on the frame when the handle turns. If the handle feels stiff or spins freely, the gearbox or bar may be worn, rather than the handle itself.
A door that drags on the threshold, catches the frame or needs lifting to lock has usually dropped. Doors can often be adjusted using the hinges and by repacking the glass or panel so the door sits square again. Adjustment is usually tried before replacing parts.
The cost of a window or door repair depends on the part needed, whether it is a standard or discontinued design, how easy it is to identify the make, the number of windows or doors, and access. Discontinued hardware sometimes needs a modern equivalent and adaptation to fit.
Draught seals and gaskets compress and shrink over time, letting in cold air and noise. Replacing them with a matching profile restores the seal without changing the window. The glazier checks the gasket type, as frames from different makers often use different profiles.
What's included
- Survey and diagnosis of the faulty part
- Written quote fixing the price for parts and work
- Matched replacement hinges, stays, handles or locks
- Removal of old parts and packaging
Working in Fareham
- Postcodes covered
- PO16, PO15, PO14 and the surrounding area, including Gosport, Portsmouth and Waterlooville
- Coast
- Fareham is about 1 km from the coast or a tidal estuary, so salt air and wind-driven rain are worth planning for. Near the coast, salt air corrodes window and door hardware more quickly, especially hinges, keeps and lock mechanisms. Stainless steel friction stays and corrosion-resistant hardware last longer, and regular cleaning and lubrication help keep moving parts free.
- Daylight and sun
- In Fareham the midwinter sun reaches about 16° above the horizon at noon, with roughly 7.7 hours of daylight, rising to about 63° and 16.3 hours in midsummer. Windows and doors on sunny elevations expand and contract more with temperature, which can make them stick in summer and catch the frame. Dark-coloured doors absorb more heat, so hinge adjustment may be needed after hot spells.
- Access and setting
- Older rural homes may have timber casements, sash windows or doors with discontinued hardware, so parts may need matching or adapting. Exposed sites put more strain on hinges and seals, and outbuildings often benefit from upgraded locks.
- Rules in England
- Approved Document Q applies to new homes in England, where doors and windows are expected to meet PAS 24 or an equivalent standard. It does not apply to replacements in existing homes, but PAS 24 products are still a sensible choice.
Guide prices in Fareham
| Typical job | Guide price inc VAT |
|---|---|
| Replace a pair of window hinges | £95 – £145 |
| Replace a window locking mechanism | £125 – £195 |
| Replace a door multipoint lock | £195 – £325 |
| Fit an anti-snap cylinder | £65 – £115 |
Get a guide price for your size
Approved Document B covers escape windows. Where an existing window is an escape route, typically in first-floor bedrooms, its replacement should give at least the same escape opening as before.
Options to choose between
Anti-snap euro cylinder
A cylinder tested to resist snapping, such as TS 007 3-star or Sold Secure SS312 Diamond, cut to fit your door.
Multipoint door lock
A new gearbox or full locking strip for uPVC and composite doors that stick, will not lock or have a loose handle.
Friction stay replacement
New hinges for uPVC and aluminium casement windows, matched for length and stack height, including egress stays for escape windows.
Window Repairs in Fareham: questions
How can I stop draughts from my existing windows?
Draughts often come from worn gaskets, a sash that has dropped or keeps that no longer pull the sash tight. Replacing the gaskets with a matching profile and adjusting the keeps or hinges usually fixes the problem. If draughts come through the frame or glass seals, the glazier will say what else needs attention.
Can you repair a uPVC window that will not close properly?
Usually, yes. Windows that will not close are most often caused by worn or bent friction stays, a sash that has dropped, or a locking cam catching the keep. The glazier identifies the fault, then replaces the hinges, adjusts the keeps or repacks the sash so it closes and locks properly again, keeping the existing frame and glass.
How do I look after window and door hardware?
Clean dirt from tracks, keeps and hinges, then apply a light machine oil or silicone spray to moving parts once or twice a year. Keep frame drainage slots clear. Do not force handles that feel stiff, as this can break gearboxes. Report a dropping door or sticking handle early, as small adjustments are easier than replacing parts.
My door handle spins and the door will not lock. What is wrong?
A handle that spins without moving the lock usually means the gearbox inside the door has failed, or the spindle connecting handle and gearbox has broken. The gearbox can often be replaced on its own. If the door is stuck locked, the glazier can usually open it without damaging the frame before fitting the new part.
Do you cover Fareham for window repairs?
Yes. We can quote for window repairs across Fareham and the surrounding Hampshire area, including postcode districts PO16, PO15 and PO14, and nearby Gosport, Portsmouth and Waterlooville. Start with your postcode on the quote form and a glazier will talk through the job, explain any charge before booking and give you a written quote.
Get a written quote in Fareham
Clear guide prices, any charge explained before booking, and one point of contact for every glazing job.