Canterbury · Kent
Window Repairs in Canterbury
A spinning handle or stuck lock in Canterbury is often a failed gearbox, and we can quote to replace the part and keep your existing door.
- CT1
- CT2
- CT5
- CT6
- Guide from £65
Door lock repair in Canterbury: what to know
Repairs usually take a single visit when the part can be identified and is carried on the van. Unusual or discontinued parts may need ordering. The glazier then returns to fit them, and in the meantime can usually leave the window or door secure and working.
Draught seals and gaskets compress and shrink over time, letting in cold air and noise. Replacing them with a matching profile restores the seal without changing the window. The glazier checks the gasket type, as frames from different makers often use different profiles.
Most modern windows use an espagnolette lock: a metal bar in the sash edge that moves locking cams into keeps on the frame when the handle turns. If the handle feels stiff or spins freely, the gearbox or bar may be worn, rather than the handle itself.
A door that drags on the threshold, catches the frame or needs lifting to lock has usually dropped. Doors can often be adjusted using the hinges and by repacking the glass or panel so the door sits square again. Adjustment is usually tried before replacing parts.
What's included
- Written quote fixing the price for parts and work
- Removal of old parts and packaging
- Adjustment of dropped or sticking doors and sashes
- Matched replacement hinges, stays, handles or locks
Working in Canterbury
- Postcodes covered
- CT1, CT2, CT5, CT6 and the surrounding area, including Whitstable, Herne Bay and Faversham
- Coast
- Canterbury sits roughly 11 km from the nearest coastline, close enough that exposure on open or high ground is worth considering. Near the coast, salt air corrodes window and door hardware more quickly, especially hinges, keeps and lock mechanisms. Stainless steel friction stays and corrosion-resistant hardware last longer, and regular cleaning and lubrication help keep moving parts free.
- Daylight and sun
- In Canterbury the midwinter sun reaches about 15° above the horizon at noon, with roughly 7.6 hours of daylight, rising to about 62° and 16.4 hours in midsummer. Windows and doors on sunny elevations expand and contract more with temperature, which can make them stick in summer and catch the frame. Dark-coloured doors absorb more heat, so hinge adjustment may be needed after hot spells.
- Access and setting
- Older rural homes may have timber casements, sash windows or doors with discontinued hardware, so parts may need matching or adapting. Exposed sites put more strain on hinges and seals, and outbuildings often benefit from upgraded locks.
- Rules in England
- Approved Document Q applies to new homes in England, where doors and windows are expected to meet PAS 24 or an equivalent standard. It does not apply to replacements in existing homes, but PAS 24 products are still a sensible choice.
Guide prices in Canterbury
| Typical job | Guide price inc VAT |
|---|---|
| Replace a pair of window hinges | £95 – £145 |
| Replace a window locking mechanism | £125 – £195 |
| Replace a door multipoint lock | £195 – £325 |
| Fit an anti-snap cylinder | £65 – £115 |
Get a guide price for your size
Approved Document B covers escape windows. Where an existing window is an escape route, typically in first-floor bedrooms, its replacement should give at least the same escape opening as before.
What you can choose
Multipoint door lock
A new gearbox or full locking strip for uPVC and composite doors that stick, will not lock or have a loose handle.
Gaskets and draught seals
Replacement seals matched to the frame profile to stop draughts, rattles and noise around opening windows and doors.
Sash cords and balances
New cords, weights or spring balances for sash windows that drop, stick or will not stay in position.
Window Repairs in Canterbury: questions
Why has my uPVC door dropped and can it be fixed?
Doors drop when hinges wear or loosen, or when the glass or panel slips inside the door and stops supporting it square. Signs include dragging on the threshold and needing to lift the handle hard to lock. Most dropped doors can be fixed by adjusting the hinges and repacking the glass or panel, without replacing the door.
Can you repair a uPVC window that will not close properly?
Usually, yes. Windows that will not close are most often caused by worn or bent friction stays, a sash that has dropped, or a locking cam catching the keep. The glazier identifies the fault, then replaces the hinges, adjusts the keeps or repacks the sash so it closes and locks properly again, keeping the existing frame and glass.
How do I look after window and door hardware?
Clean dirt from tracks, keeps and hinges, then apply a light machine oil or silicone spray to moving parts once or twice a year. Keep frame drainage slots clear. Do not force handles that feel stiff, as this can break gearboxes. Report a dropping door or sticking handle early, as small adjustments are easier than replacing parts.
How can I stop draughts from my existing windows?
Draughts often come from worn gaskets, a sash that has dropped or keeps that no longer pull the sash tight. Replacing the gaskets with a matching profile and adjusting the keeps or hinges usually fixes the problem. If draughts come through the frame or glass seals, the glazier will say what else needs attention.
Do you cover Canterbury for window repairs?
Yes. We can quote for window repairs across Canterbury and the surrounding Kent area, including postcode districts CT1, CT2, CT5 and CT6, and nearby Whitstable, Herne Bay and Faversham. Start with your postcode on the quote form and a glazier will talk through the job, explain any charge before booking and give you a written quote.
Get a written quote in Canterbury
Clear guide prices, any charge explained before booking, and one point of contact for every glazing job.