Folkestone · Kent
Window Repairs in Folkestone
Is your uPVC door in Folkestone dragging, sticking or hard to lock? Our glaziers can adjust it or replace the gearbox, hinges or cylinder.
- CT19
- CT20
- Guide from £65
uPVC window repairs for homes and businesses in Folkestone
Window restrictors limit how far a window opens, which can help reduce the risk of falls from upper floors. Many restrictors can be released by an adult, so the window can still be opened fully for escape or cleaning. They can usually be fitted to existing windows.
A door that drags on the threshold, catches the frame or needs lifting to lock has usually dropped. Doors can often be adjusted using the hinges and by repacking the glass or panel so the door sits square again. Adjustment is usually tried before replacing parts.
Simple care keeps hardware working longer. Clean tracks and keeps, then apply a light lubricant to moving parts once or twice a year. Keep drainage slots clear. Avoid slamming doors or forcing handles, as this strains gearboxes and can cause a door to drop over time.
Most modern windows use an espagnolette lock: a metal bar in the sash edge that moves locking cams into keeps on the frame when the handle turns. If the handle feels stiff or spins freely, the gearbox or bar may be worn, rather than the handle itself.
What a typical job includes
- Survey and diagnosis of the faulty part
- Written quote fixing the price for parts and work
- Adjustment of dropped or sticking doors and sashes
- Matched replacement hinges, stays, handles or locks
Folkestone at a glance
- Postcodes covered
- CT19, CT20 and the surrounding area, including Dover, Ashford (Kent) and Deal
- Coast
- Folkestone is about 1 km from the coast or a tidal estuary, so salt air and wind-driven rain are worth planning for. Near the coast, salt air corrodes window and door hardware more quickly, especially hinges, keeps and lock mechanisms. Stainless steel friction stays and corrosion-resistant hardware last longer, and regular cleaning and lubrication help keep moving parts free.
- Daylight and sun
- In Folkestone the midwinter sun reaches about 16° above the horizon at noon, with roughly 7.7 hours of daylight, rising to about 62° and 16.3 hours in midsummer. Windows and doors on sunny elevations expand and contract more with temperature, which can make them stick in summer and catch the frame. Dark-coloured doors absorb more heat, so hinge adjustment may be needed after hot spells.
- Access and setting
- In flats and terraced homes, working on upper-floor windows may need to be done from inside. Security matters on street-facing doors, so anti-snap cylinders and secure handles are worth considering. Parking near the property can affect access.
- Rules in England
- Approved Document Q applies to new homes in England, where doors and windows are expected to meet PAS 24 or an equivalent standard. It does not apply to replacements in existing homes, but PAS 24 products are still a sensible choice.
Guide prices in Folkestone
| Typical job | Guide price inc VAT |
|---|---|
| Replace a pair of window hinges | £95 – £145 |
| Replace a window locking mechanism | £125 – £195 |
| Replace a door multipoint lock | £195 – £325 |
| Fit an anti-snap cylinder | £65 – £115 |
Get a guide price for your size
Approved Document B covers escape windows. Where an existing window is an escape route, typically in first-floor bedrooms, its replacement should give at least the same escape opening as before.
What you can choose
Handles and window restrictors
New locking handles for windows and doors, and restrictors that limit how far upper-floor windows open.
Multipoint door lock
A new gearbox or full locking strip for uPVC and composite doors that stick, will not lock or have a loose handle.
Sash cords and balances
New cords, weights or spring balances for sash windows that drop, stick or will not stay in position.
Window Repairs in Folkestone: questions
How can I stop draughts from my existing windows?
Draughts often come from worn gaskets, a sash that has dropped or keeps that no longer pull the sash tight. Replacing the gaskets with a matching profile and adjusting the keeps or hinges usually fixes the problem. If draughts come through the frame or glass seals, the glazier will say what else needs attention.
Can you repair a uPVC window that will not close properly?
Usually, yes. Windows that will not close are most often caused by worn or bent friction stays, a sash that has dropped, or a locking cam catching the keep. The glazier identifies the fault, then replaces the hinges, adjusts the keeps or repacks the sash so it closes and locks properly again, keeping the existing frame and glass.
Why has my uPVC door dropped and can it be fixed?
Doors drop when hinges wear or loosen, or when the glass or panel slips inside the door and stops supporting it square. Signs include dragging on the threshold and needing to lift the handle hard to lock. Most dropped doors can be fixed by adjusting the hinges and repacking the glass or panel, without replacing the door.
Do replacement window hinges need to allow escape in a fire?
In England, upper-floor bedroom windows are often relied on as escape windows. Replacement hinges should not reduce the opening below what the window gave before. Egress friction stays open wider than standard stays to give a clear opening, so the glazier checks the room and window before choosing the hinge type.
Do you cover Folkestone for window repairs?
Yes. We can quote for window repairs across Folkestone and the surrounding Kent area, including postcode districts CT19 and CT20, and nearby Dover, Ashford (Kent) and Deal. Start with your postcode on the quote form and a glazier will talk through the job, explain any charge before booking and give you a written quote.
Get a written quote in Folkestone
Clear guide prices, any charge explained before booking, and one point of contact for every glazing job.