Burntwood · Staffordshire
Window Repairs in Burntwood
Our glaziers can repair windows and doors across Burntwood, matching hinges, locks and seals to your existing frames so everything works and seals properly again.
- WS7
- Guide from £65
Burntwood: window handle replacement
Simple care keeps hardware working longer. Clean tracks and keeps, then apply a light lubricant to moving parts once or twice a year. Keep drainage slots clear. Avoid slamming doors or forcing handles, as this strains gearboxes and can cause a door to drop over time.
A door that drags on the threshold, catches the frame or needs lifting to lock has usually dropped. Doors can often be adjusted using the hinges and by repacking the glass or panel so the door sits square again. Adjustment is usually tried before replacing parts.
Friction stays are the hinges on most uPVC and aluminium casement windows. When the sliding shoe wears or the arms bend, the window drops, binds or will not stay open. Replacements must match the stay's length, stack height and type, which the glazier measures before ordering.
Most modern windows use an espagnolette lock: a metal bar in the sash edge that moves locking cams into keeps on the frame when the handle turns. If the handle feels stiff or spins freely, the gearbox or bar may be worn, rather than the handle itself.
What a typical job includes
- Adjustment of dropped or sticking doors and sashes
- Removal of old parts and packaging
- Survey and diagnosis of the faulty part
- Written quote fixing the price for parts and work
About Burntwood for this job
- Postcodes covered
- WS7 and the surrounding area, including Lichfield, Cannock and Aldridge
- Coast
- Burntwood is well inland, around 91 km from the nearest coast, so salt exposure is not usually a factor.
- Daylight and sun
- In Burntwood the midwinter sun reaches about 14° above the horizon at noon, with roughly 7.4 hours of daylight, rising to about 61° and 16.6 hours in midsummer. Windows and doors on sunny elevations expand and contract more with temperature, which can make them stick in summer and catch the frame. Dark-coloured doors absorb more heat, so hinge adjustment may be needed after hot spells.
- Access and setting
- Older rural homes may have timber casements, sash windows or doors with discontinued hardware, so parts may need matching or adapting. Exposed sites put more strain on hinges and seals, and outbuildings often benefit from upgraded locks.
- Rules in England
- Approved Document Q applies to new homes in England, where doors and windows are expected to meet PAS 24 or an equivalent standard. It does not apply to replacements in existing homes, but PAS 24 products are still a sensible choice.
Guide prices in Burntwood
| Typical job | Guide price inc VAT |
|---|---|
| Replace a pair of window hinges | £95 – £145 |
| Replace a window locking mechanism | £125 – £195 |
| Replace a door multipoint lock | £195 – £325 |
| Fit an anti-snap cylinder | £65 – £115 |
Get a guide price for your size
Approved Document B covers escape windows. Where an existing window is an escape route, typically in first-floor bedrooms, its replacement should give at least the same escape opening as before.
Options to choose between
Friction stay replacement
New hinges for uPVC and aluminium casement windows, matched for length and stack height, including egress stays for escape windows.
Anti-snap euro cylinder
A cylinder tested to resist snapping, such as TS 007 3-star or Sold Secure SS312 Diamond, cut to fit your door.
Espagnolette lock and gearbox
Replacement locking bar or gearbox for windows that will not lock, have a spinning handle or feel stiff to operate.
Window Repairs in Burntwood: questions
What does it cost to replace a window hinge or door lock?
The cost depends on the part, whether it is standard or discontinued, how many windows or doors need work, and access. Gearboxes and full multipoint strips cost more than a single handle or cylinder. See the guide prices for typical repairs, then get a written quote once the glazier has identified the exact part needed.
Can you find parts for old or discontinued windows?
Often, yes. Many hinges, locks and gearboxes are made to common sizes, and modern equivalents exist for many older designs. The glazier measures key dimensions such as backset, length and stack height. If an exact match is not available, the quote will explain the nearest option and any adaptation needed.
Is my euro cylinder lock secure?
Many older euro cylinders can be snapped, which lets an intruder open the door. Look for markings on the cylinder face. A TS 007 3-star mark, or certification to Sold Secure SS312 Diamond, shows the cylinder has been tested to resist snapping. The glazier can check and replace the cylinder with one cut to fit your door.
My door handle spins and the door will not lock. What is wrong?
A handle that spins without moving the lock usually means the gearbox inside the door has failed, or the spindle connecting handle and gearbox has broken. The gearbox can often be replaced on its own. If the door is stuck locked, the glazier can usually open it without damaging the frame before fitting the new part.
Do you cover Burntwood for window repairs?
Yes. We can quote for window repairs across Burntwood and the surrounding Staffordshire area, including postcode districts WS7, and nearby Lichfield, Cannock and Aldridge. Start with your postcode on the quote form and a glazier will talk through the job, explain any charge before booking and give you a written quote.
Get a written quote in Burntwood
Clear guide prices, any charge explained before booking, and one point of contact for every glazing job.