Stafford · Staffordshire
Window Repairs in Stafford
Our glaziers can repair windows and doors across Stafford, matching hinges, locks and seals to your existing frames so everything works and seals properly again.
- ST16
- ST17
- Guide from £65
About dropped uPVC door repair in Stafford
Repairs usually take a single visit when the part can be identified and is carried on the van. Unusual or discontinued parts may need ordering. The glazier then returns to fit them, and in the meantime can usually leave the window or door secure and working.
The cost of a window or door repair depends on the part needed, whether it is a standard or discontinued design, how easy it is to identify the make, the number of windows or doors, and access. Discontinued hardware sometimes needs a modern equivalent and adaptation to fit.
Friction stays are the hinges on most uPVC and aluminium casement windows. When the sliding shoe wears or the arms bend, the window drops, binds or will not stay open. Replacements must match the stay's length, stack height and type, which the glazier measures before ordering.
A door that drags on the threshold, catches the frame or needs lifting to lock has usually dropped. Doors can often be adjusted using the hinges and by repacking the glass or panel so the door sits square again. Adjustment is usually tried before replacing parts.
What you get
- Matched replacement hinges, stays, handles or locks
- Adjustment of dropped or sticking doors and sashes
- Written quote fixing the price for parts and work
- Survey and diagnosis of the faulty part
About Stafford for this job
- Postcodes covered
- ST16, ST17 and the surrounding area, including Rugeley, Cannock and Burntwood
- Coast
- Stafford is well inland, around 72 km from the nearest coast, so salt exposure is not usually a factor.
- Daylight and sun
- In Stafford the midwinter sun reaches about 14° above the horizon at noon, with roughly 7.4 hours of daylight, rising to about 61° and 16.6 hours in midsummer. Windows and doors on sunny elevations expand and contract more with temperature, which can make them stick in summer and catch the frame. Dark-coloured doors absorb more heat, so hinge adjustment may be needed after hot spells.
- Access and setting
- In flats and terraced homes, working on upper-floor windows may need to be done from inside. Security matters on street-facing doors, so anti-snap cylinders and secure handles are worth considering. Parking near the property can affect access.
- Rules in England
- Approved Document Q applies to new homes in England, where doors and windows are expected to meet PAS 24 or an equivalent standard. It does not apply to replacements in existing homes, but PAS 24 products are still a sensible choice.
Guide prices in Stafford
| Typical job | Guide price inc VAT |
|---|---|
| Replace a pair of window hinges | £95 – £145 |
| Replace a window locking mechanism | £125 – £195 |
| Replace a door multipoint lock | £195 – £325 |
| Fit an anti-snap cylinder | £65 – £115 |
Get a guide price for your size
Approved Document B covers escape windows. Where an existing window is an escape route, typically in first-floor bedrooms, its replacement should give at least the same escape opening as before.
What you can choose
Friction stay replacement
New hinges for uPVC and aluminium casement windows, matched for length and stack height, including egress stays for escape windows.
Multipoint door lock
A new gearbox or full locking strip for uPVC and composite doors that stick, will not lock or have a loose handle.
Espagnolette lock and gearbox
Replacement locking bar or gearbox for windows that will not lock, have a spinning handle or feel stiff to operate.
Window Repairs in Stafford: questions
Do replacement window hinges need to allow escape in a fire?
In England, upper-floor bedroom windows are often relied on as escape windows. Replacement hinges should not reduce the opening below what the window gave before. Egress friction stays open wider than standard stays to give a clear opening, so the glazier checks the room and window before choosing the hinge type.
How do I look after window and door hardware?
Clean dirt from tracks, keeps and hinges, then apply a light machine oil or silicone spray to moving parts once or twice a year. Keep frame drainage slots clear. Do not force handles that feel stiff, as this can break gearboxes. Report a dropping door or sticking handle early, as small adjustments are easier than replacing parts.
What does it cost to replace a window hinge or door lock?
The cost depends on the part, whether it is standard or discontinued, how many windows or doors need work, and access. Gearboxes and full multipoint strips cost more than a single handle or cylinder. See the guide prices for typical repairs, then get a written quote once the glazier has identified the exact part needed.
My door handle spins and the door will not lock. What is wrong?
A handle that spins without moving the lock usually means the gearbox inside the door has failed, or the spindle connecting handle and gearbox has broken. The gearbox can often be replaced on its own. If the door is stuck locked, the glazier can usually open it without damaging the frame before fitting the new part.
Do you cover Stafford for window repairs?
Yes. We can quote for window repairs across Stafford and the surrounding Staffordshire area, including postcode districts ST16 and ST17, and nearby Rugeley, Cannock and Burntwood. Start with your postcode on the quote form and a glazier will talk through the job, explain any charge before booking and give you a written quote.
Get a written quote in Stafford
Clear guide prices, any charge explained before booking, and one point of contact for every glazing job.