Call 0800 088 6248

South Yorkshire · England

Aluminium Windows in South Yorkshire

Planning an extension or renovation in South Yorkshire? We can supply and fit aluminium windows made to your sizes, with dual-colour frames and glass chosen room by room.

  • Guide from £925
  • 7 towns covered
  • Postcode areas DN, S

Get your free quote

Start with your postcode. A glazier will be in touch to arrange a free survey.

By sending this form you agree we can contact you about this enquiry. See our privacy policy for how we use your details.

No obligation. Prefer to talk? Call 0800 088 6248 or WhatsApp us.

South Yorkshire: powder coated aluminium windows

Large aluminium windows that reach low down, such as floor-to-ceiling glazing, need safety glass. In England, Approved Document K treats glazing within 800mm of the floor as a critical location, so those panes are usually toughened or laminated and permanently marked to show their safety classification.

Aluminium windows can be fitted with trickle vents in the frame head, which matters because in England, Approved Document F expects ventilation after window replacement to be no worse than before. The glazier records the existing vents at survey and sizes new ones to suit each room.

Upper-floor windows may need to work as escape routes. In England, Approved Document B guidance for an escape window is an unobstructed openable area of at least 0.33 m², at least 450mm high and 450mm wide, and no more than 1100mm from floor to the bottom of the opening.

Steel-look aluminium windows reproduce the slim frames and glazing bars of traditional metal windows while adding a thermal break and double glazing. They are often chosen to replace failing original steel windows in 1930s houses, though conservation areas and listed buildings may need consent for the change.

White rendered house with slim grey aluminium windows and a large picture window

Towns we cover for aluminium windows in South Yorkshire

Choose your town for local details, nearby areas and the postcode districts we cover.

What applies in South Yorkshire

Approved Document K requires safety glass in critical locations in England: glazing in doors and in side panels within 300 mm of a door, up to 1500 mm above floor level, and any glazing in walls or partitions up to 800 mm above floor level.

Approved Document B covers escape windows. Where an existing window is an escape route, typically in first-floor bedrooms, its replacement should give at least the same escape opening as before.

South Yorkshire is inland, around 35 km from the nearest coast at its closest point, so salt exposure is rarely a factor.

Large aluminium units are heavy, so city jobs need planned unloading, parking and sometimes lifting gear or extra hands for upper floors. Flats need freeholder consent and planning permission, and conservation areas often control frame colour and glazing bar patterns.

Guide prices

Guide prices inc VAT for typical jobs. Remote and island locations are quoted by arrangement. Your written quote fixes the price after measuring.
Typical jobGuide price inc VAT
Casement window, 900 × 1050 mm£925 – £1,195
Casement window, 1200 × 1200 mm£1,095 – £1,395
Large window, 1800 × 1500 mm£1,495 – £1,995
Slimline heritage style, 1200 × 1200 mm£1,295 – £1,695

Choosing your aluminium windows

Glass upgrades

Triple glazing, laminated acoustic glass, solar-control coatings or obscure glass, chosen per window to suit the room and elevation.

Tilt and turn

Inward-opening sashes that tilt for secure ventilation or swing open for cleaning and escape, useful for flats and high floors.

Dual-colour powder coat

A different colour inside and out, such as anthracite grey outside with white inside, from a wide range of RAL colours and textures.

Steel-look windows

Very slim frames with glazing bars that mimic traditional metal windows, adding thermal performance and double glazing to the classic look.

Aluminium Windows in South Yorkshire: questions

How do I look after powder-coated aluminium windows?

Clean powder-coated aluminium windows with warm water and a mild, non-abrasive detergent a few times a year, then rinse and dry. Avoid scouring pads, solvents and pressure washers close to the seals. Keep drainage slots clear and put a little light oil on hinges and locking points. Near the coast, more frequent washing removes salt deposits.

How much do aluminium windows cost?

The cost of aluminium windows depends on the number and size of windows, the profile system, how many sashes open, the colour and finish, the glass and the access. They generally cost more than equivalent uPVC because of the material and factory coating. See the guide prices for typical ranges; the written quote fixes the price for your exact specification.

What guarantee do aluminium windows come with?

Manufacturer guarantees apply to the frames, powder coating, hardware and sealed units, and the terms are confirmed in writing. Coating cover often depends on the site environment and on regular cleaning, so read the conditions. Guarantee terms for the installation are set out in writing with your quote, before you agree to go ahead.

How long does it take to install aluminium windows?

Most single windows are fitted within a day, and a typical house takes a few days on site depending on the number of windows and the access. The longer part is manufacturing, because frames are cut, coated and glazed to the survey sizes. The expected lead time is confirmed in writing when you accept the quote.

Which parts of South Yorkshire do you cover for aluminium windows?

We cover the whole of South Yorkshire, including Sheffield, Rotherham, Doncaster, Barnsley and Chapeltown, and postcode areas DN, S. Building rules for aluminium windows here follow the regulations for England. Enter your postcode on the quote form and we will confirm cover; then a glazier will arrange a free survey before giving you a written quote.

Get a written quote in South Yorkshire

Free survey for new glazing, clear guide prices and one point of contact for every glazing job.

CallGet a quote