South Yorkshire · England
Glass Splashbacks in South Yorkshire
From a single panel behind a hob to a full kitchen wall, we can quote for glass splashbacks in South Yorkshire with joints planned neatly at corners and natural breaks.
- Guide from £225
- 7 towns covered
- Postcode areas DN, S
Toughened glass splashback in South Yorkshire: what to know
Splashbacks are templated once the worktops, units and hob are fitted, not from kitchen plans. Worktop heights, wall angles and socket positions often move during installation, and the glass is made to the finished dimensions so edges line up and gaps stay even.
Hob makers set minimum clearances between the hob and nearby wall surfaces, and gas hobs in particular can have specific requirements. We check your hob's installation instructions before ordering so the glass, its cut-outs and any joints sit where the manufacturer allows.
The price depends on the total glass area, the number of panels and joints, the number of cut-outs, the colour and glass type, and access to the wall. Low-iron glass, metallic or printed finishes and complex shapes add cost. See the guide prices for typical ranges.
Our glaziers remove and refit socket and switch faceplates so the glass can sit behind them, with the power isolated first. Moving or adding sockets, or any other electrical alteration, needs a qualified electrician, ideally before the splashback is templated.
Towns we cover for glass splashbacks in South Yorkshire
Choose your town for local details, nearby areas and the postcode districts we cover.
What applies in South Yorkshire
Building regulations do not usually apply to this type of work, but we confirm anything that does in writing with your quote.
South Yorkshire is inland, around 35 km from the nearest coast at its closest point, so salt exposure is rarely a factor.
Kitchens in flats and terraces often have narrow access and tight stairs, so long splashbacks may be split into shorter panels with planned joints. Parking for the fitting team and building rules on working hours can also affect scheduling.
Guide prices
| Typical job | Guide price inc VAT |
|---|---|
| Hob splashback, 900 × 750 mm | £225 – £285 |
| Run behind worktop, 2400 × 600 mm | £395 – £515 |
| Low-iron, 900 × 750 mm | £235 – £295 |
Choosing your glass splashbacks
Printed design
A digitally printed image or pattern on the back of the glass, sealed behind it so the front stays smooth and wipeable.
Low-iron glass
Glass with less iron, removing the green tint of standard glass so whites, creams and pale colours look true to the sample.
Metallic or sparkle finish
Back-painted glass with metallic or fine sparkle effects, adding depth and reflection without the upkeep of polished metal.
Back-painted colour
Toughened glass painted on the back in a matched colour, giving a smooth, glossy finish in almost any shade to suit units or walls.
Glass Splashbacks in South Yorkshire: questions
How do I clean a glass splashback?
Wipe it with a soft cloth and warm soapy water, or a non-abrasive glass cleaner, then buff dry for a streak-free finish. Grease behind the hob comes off easily because there are no grout lines. Avoid scourers, abrasive creams and blades, which can scratch the glass, and do not use cleaners that could seep behind the edges.
Why does my white glass splashback look slightly green?
Standard glass contains iron, which gives it a green tint that shows through pale back-painted colours, particularly white and cream. Low-iron glass has much less iron, so the colour behind looks close to the painted sample. If you are choosing a light colour, it is worth specifying low-iron glass from the start.
What affects the cost of a glass splashback?
The main cost drivers are the total glass area, the number of panels and joints, the number of socket and switch cut-outs, the colour and glass type, and how easy the wall is to reach. Low-iron glass, metallic or printed finishes and shaped panels add cost. See the guide prices for typical ranges.
How do you match the colour of a glass splashback?
We can match many paint and RAL colours, and the most reliable way to choose is from a physical glass sample viewed in your own kitchen. Colours look different on screens and under different lighting. For pale colours we usually suggest low-iron glass, because standard glass adds a green tint to the painted back.
Which parts of South Yorkshire do you cover for glass splashbacks?
We cover the whole of South Yorkshire, including Sheffield, Rotherham, Doncaster, Barnsley and Chapeltown, and postcode areas DN, S. Building rules for glass splashbacks here follow the regulations for England. Enter your postcode on the quote form and we will confirm cover; then a glazier will arrange a free survey before giving you a written quote.
Other glazing services in South Yorkshire
- Replacement Glass in South Yorkshire
- Misted Glass Repair in South Yorkshire
- Emergency Glazing in South Yorkshire
- Safety Glass in South Yorkshire
- Window Repairs in South Yorkshire
- Window Film in South Yorkshire
- uPVC Windows in South Yorkshire
- Aluminium Windows in South Yorkshire
- Sash Windows in South Yorkshire
- Composite Doors in South Yorkshire
- Bifold Doors in South Yorkshire
- Sliding Doors in South Yorkshire
- Secondary Glazing in South Yorkshire
- Roof Lanterns in South Yorkshire
- Glass Balustrades in South Yorkshire
- Frameless Glass in South Yorkshire
- Shower Screens in South Yorkshire
- Bespoke Mirrors in South Yorkshire
- Glass Roofs in South Yorkshire
- Shopfront Glazing in South Yorkshire
- Curtain Walling in South Yorkshire
- Glass Partitions in South Yorkshire
- Property Glazing in South Yorkshire
All glazing in South Yorkshire · Glass Splashbacks across the UK
Get a written quote in South Yorkshire
Free survey for new glazing, clear guide prices and one point of contact for every glazing job.