Call 0800 088 6248

Greater London · England

Bespoke Mirrors in Greater London

Our glaziers fit bespoke mirrors in Greater London for homes and businesses, including tinted, antique-effect and bevelled mirrors cut around sockets and fitted furniture.

  • Guide from £205
  • 79 towns covered
  • Postcode areas BR, CR, DA, E, EC, EN, HA, IG, KT, N, NW, RM, SE, SM, SW, TN, TW, UB, W, WC

Get your free quote

Start with your postcode. A glazier will be in touch to arrange a free survey.

By sending this form you agree we can contact you about this enquiry. See our privacy policy for how we use your details.

No obligation. Prefer to talk? Call 0800 088 6248 or WhatsApp us.

Bespoke mirrors in Greater London: what to know

A bonded mirror follows the surface behind it, so an uneven wall can bend the reflection. We check flatness at survey, and on uneven plaster or stone walls the mirror may need a flat backing board or the wall levelling first to avoid a wavy, distorted image.

Edge finish affects both look and safety. Flat polished edges suit frameless mirrors and mirror walls, bevelled edges add an angled border that catches the light, and a simple arrised edge takes the sharpness off edges that will be hidden by a frame or channel.

The price depends on mirror size and thickness, the number of panels, the edge finish, tint or low-iron glass, safety backing, cut-outs and the fixing method. Gym walls, very large single sheets and difficult access also affect cost. See the guide prices for typical ranges.

Most mirrors for internal use are made from silver-coated float glass covered by BS EN 1036-1, which sets definitions, quality requirements and test methods, including resistance to damp and corrosion. Mirror for bathrooms or other humid areas should come from a supplier whose product meets that standard.

Floor-to-ceiling mirror wall in a home gym

What applies in Greater London

Approved Document K requires safety glass in critical locations in England: glazing in doors and in side panels within 300 mm of a door, up to 1500 mm above floor level, and any glazing in walls or partitions up to 800 mm above floor level.

Parts of Greater London are within about 15 km of the coast, where exposure to wind and salt air is worth planning for. Mirrors are fitted indoors, but salty, humid coastal air can still reach the silver backing through exposed edges, particularly in bathrooms and near entrances. Protected edges, a compatible adhesive and good ventilation all help prevent black edge corrosion.

Large mirrors for flats, salons and gyms often have to travel through narrow stairwells and small lifts, so walls may be covered in several panels with planned joints. Loading limits and building working hours can affect fitting times.

Guide prices

Guide prices inc VAT for typical jobs. Remote and island locations are quoted by arrangement. Your written quote fixes the price after measuring.
Typical jobGuide price inc VAT
Polished mirror, 1200 × 900 mm£205 – £265
Safety-backed mirror, 1800 × 1000 mm£365 – £465
Gym mirror wall, 4000 × 2000 mm£995 – £1,295

Choosing your bespoke mirrors

Safety-backed mirror

Mirror with a bonded backing film that holds fragments together if it breaks, recommended for doors, full-height mirrors, gyms and children's rooms.

Tinted mirror

Grey or bronze tinted mirror that softens the reflection and adds warmth or depth, often used as a feature wall or in hospitality spaces.

Bevelled edge

An angled border ground and polished around the edge that catches the light and frames the mirror without needing a separate frame.

Heated demister pad

A thin heating pad bonded behind a bathroom mirror to keep an area clear of steam, wired in by a qualified electrician.

Bespoke Mirrors in Greater London: questions

How is a large mirror fixed to the wall?

Large mirrors are usually bonded with an adhesive made for mirror backing and supported along the bottom edge by a slim channel or clips. The support carries the weight while the adhesive cures and adds security afterwards. Smaller mirrors can be screw-fixed through drilled holes with decorative caps, which makes them easier to remove later.

What affects the cost of a bespoke mirror?

The main cost drivers are the size and thickness of the mirror, the number of panels, the edge finish, any tint or low-iron glass, safety backing, cut-outs and the fixing method. Very large single sheets, access through narrow stairs and full mirror walls also affect the price. See the guide prices for typical ranges.

How should I clean a mirror without damaging it?

Spray glass cleaner onto a soft, lint-free cloth rather than directly onto the mirror, then wipe and buff dry. That stops liquid running down and soaking into the bottom edge, which is where black edges usually start. Avoid abrasive pads and harsh chemical cleaners, and dry the edges after cleaning in bathrooms.

What edge finishes can I choose for a bespoke mirror?

The main choices are a flat polished edge, a bevelled edge and an arrised edge. Polished edges give a clean, frameless look and suit mirror walls, bevels add an angled border that catches the light, and arrised edges simply take off the sharpness where a frame or channel will hide them. Bevel width can usually be chosen too.

Which parts of Greater London do you cover for bespoke mirrors?

We cover the whole of Greater London, including Islington, Bexleyheath, Barking, Sutton and Croydon, and postcode areas BR, CR, DA, E, EC, EN, HA, IG, KT, N, NW, RM, SE, SM, SW, TN, TW, UB, W, WC. Building rules for bespoke mirrors here follow the regulations for England. Enter your postcode on the quote form and we will confirm cover; then a glazier will arrange a free survey before giving you a written quote.

Get a written quote in Greater London

Free survey for new glazing, clear guide prices and one point of contact for every glazing job.

CallGet a quote