Norfolk · England
Bespoke Mirrors in Norfolk
Our glaziers fit bespoke mirrors in Norfolk for homes and businesses, including tinted, antique-effect and bevelled mirrors cut around sockets and fitted furniture.
- Guide from £205
- 7 towns covered
- Postcode areas IP, NR, PE
Bespoke mirrors for homes and businesses in Norfolk
Mirrors must be bonded with an adhesive made to be compatible with mirror backing. Some general-purpose adhesives and acidic sealants can attack the protective coatings and the silver, causing dark patches that spread from behind. We only use mirror-compatible products.
Large mirrors are usually fixed with mirror adhesive and supported at the base by a slim channel or clips while the adhesive cures and afterwards. Smaller mirrors can be screw-fixed through drilled holes with decorative caps, which also lets them be removed later.
Most mirrors for internal use are made from silver-coated float glass covered by BS EN 1036-1, which sets definitions, quality requirements and test methods, including resistance to damp and corrosion. Mirror for bathrooms or other humid areas should come from a supplier whose product meets that standard.
Edge finish affects both look and safety. Flat polished edges suit frameless mirrors and mirror walls, bevelled edges add an angled border that catches the light, and a simple arrised edge takes the sharpness off edges that will be hidden by a frame or channel.
Towns we cover for bespoke mirrors in Norfolk
Choose your town for local details, nearby areas and the postcode districts we cover.
What applies in Norfolk
Approved Document K requires safety glass in critical locations in England: glazing in doors and in side panels within 300 mm of a door, up to 1500 mm above floor level, and any glazing in walls or partitions up to 800 mm above floor level.
Norfolk has its own coastline, so for homes and businesses near the sea, salt air and wind-driven rain are part of the brief. Mirrors are fitted indoors, but salty, humid coastal air can still reach the silver backing through exposed edges, particularly in bathrooms and near entrances. Protected edges, a compatible adhesive and good ventilation all help prevent black edge corrosion.
Older rural homes often have uneven walls of stone or lime plaster, which can distort a bonded mirror unless the wall is levelled or a backing board is used. Damp solid walls also need checking before a mirror is fixed to them.
Guide prices
| Typical job | Guide price inc VAT |
|---|---|
| Polished mirror, 1200 × 900 mm | £205 – £265 |
| Safety-backed mirror, 1800 × 1000 mm | £365 – £465 |
| Gym mirror wall, 4000 × 2000 mm | £995 – £1,295 |
Choosing your bespoke mirrors
Low-iron mirror
Mirror made on low-iron glass, which reduces the slight green cast of standard glass for a brighter, more colour-accurate reflection.
Antique-effect mirror
Mirror with a deliberately aged, mottled finish, giving a vintage look for feature walls, alcoves and period-style rooms.
Safety-backed mirror
Mirror with a bonded backing film that holds fragments together if it breaks, recommended for doors, full-height mirrors, gyms and children's rooms.
Bevelled edge
An angled border ground and polished around the edge that catches the light and frames the mirror without needing a separate frame.
Bespoke Mirrors in Norfolk: questions
Can I have a bespoke mirror in a bathroom?
Yes, provided the room is well ventilated and the mirror is protected from standing water. We use mirror that meets the relevant standard for internal use, bond it with a compatible adhesive and keep edges away from splashes where possible. A heated demister pad can keep part of the mirror clear, wired in by a qualified electrician.
Can a large mirror be fixed to plasterboard?
Often, yes, but it depends on the board, its fixings and the surface finish. Adhesive grips the paint or plaster layer, so flaky paint or weak skim can let go under the weight. We check the wall at survey and may add a base channel, mechanical fixings into studs, or a backing board to spread the load.
What affects the cost of a bespoke mirror?
The main cost drivers are the size and thickness of the mirror, the number of panels, the edge finish, any tint or low-iron glass, safety backing, cut-outs and the fixing method. Very large single sheets, access through narrow stairs and full mirror walls also affect the price. See the guide prices for typical ranges.
Can a mirror be cut around sockets and light switches?
Yes. We mark socket and switch positions on the template, cut the openings in the mirror, then remove and refit the faceplates so the mirror sits neatly behind them with the power isolated. If sockets need moving or adding, a qualified electrician should do that before we template so the cut-outs line up.
Which parts of Norfolk do you cover for bespoke mirrors?
We cover the whole of Norfolk, including Norwich, Great Yarmouth, King's Lynn, Thetford and Dereham, and postcode areas IP, NR, PE. Building rules for bespoke mirrors here follow the regulations for England. Enter your postcode on the quote form and we will confirm cover; then a glazier will arrange a free survey before giving you a written quote.
Other glazing services in Norfolk
- Replacement Glass in Norfolk
- Misted Glass Repair in Norfolk
- Emergency Glazing in Norfolk
- Safety Glass in Norfolk
- Window Repairs in Norfolk
- Window Film in Norfolk
- uPVC Windows in Norfolk
- Aluminium Windows in Norfolk
- Sash Windows in Norfolk
- Composite Doors in Norfolk
- Bifold Doors in Norfolk
- Sliding Doors in Norfolk
- Secondary Glazing in Norfolk
- Roof Lanterns in Norfolk
- Glass Balustrades in Norfolk
- Frameless Glass in Norfolk
- Shower Screens in Norfolk
- Glass Splashbacks in Norfolk
- Glass Roofs in Norfolk
- Shopfront Glazing in Norfolk
- Curtain Walling in Norfolk
- Glass Partitions in Norfolk
- Property Glazing in Norfolk
Get a written quote in Norfolk
Free survey for new glazing, clear guide prices and one point of contact for every glazing job.