Call 0800 088 6248

Norfolk · England

Shower Screens in Norfolk

A tired shower curtain or leaking framed enclosure in Norfolk can be replaced with clear toughened glass, fixed into solid backing and sealed neatly to the tiles.

  • Guide from £395
  • 7 towns covered
  • Postcode areas IP, NR, PE

Get your free quote

Start with your postcode. A glazier will be in touch to arrange a free survey.

By sending this form you agree we can contact you about this enquiry. See our privacy policy for how we use your details.

No obligation. Prefer to talk? Call 0800 088 6248 or WhatsApp us.

Norfolk: made to measure shower screen

An easy-clean coating is a water-repellent layer bonded to the glass that helps water run off and reduces limescale and soap marks. It does not stop cleaning altogether, and how long it lasts depends on following the care instructions and avoiding abrasive products.

The price depends mainly on panel sizes, the number of panels, glass thickness, the hinge and bracing hardware, and any cut-outs for sloping ceilings, trays or skirting. Low-iron or satin glass, an easy-clean coating and special finishes add cost. See the guide prices for typical ranges.

Shower screen glass is toughened safety glass made to BS EN 12150. It is heated and then quickly cooled during manufacture, which makes it much stronger than ordinary glass and means that if it does break, it breaks into small, blunt pieces rather than sharp shards.

Toughened glass can very occasionally break on its own because of nickel sulphide inclusions. Heat soak testing to BS EN 14179 reduces that risk by breaking flawed panels in the factory, though it cannot remove it completely, and it can be specified for any screen.

Frameless walk-in shower screen with black fittings in a tiled bathroom

Towns we cover for shower screens in Norfolk

Choose your town for local details, nearby areas and the postcode districts we cover.

What applies in Norfolk

Approved Document K requires safety glass in critical locations in England: glazing in doors and in side panels within 300 mm of a door, up to 1500 mm above floor level, and any glazing in walls or partitions up to 800 mm above floor level.

Norfolk has its own coastline, so for homes and businesses near the sea, salt air and wind-driven rain are part of the brief. Shower glass sits indoors, so salt air has little effect on it, but coastal homes can have damp, humid air that slows drying. Good bathroom ventilation and a quick squeegee after use help prevent mould on the silicone and marks on the hardware.

Older rural homes often have uneven walls, sloping ceilings and timber floors that flex, all of which shape the screen design. Hard water is common in some areas, so an easy-clean coating and regular squeegeeing help keep the glass clear.

Guide prices

Guide prices inc VAT for typical jobs. Remote and island locations are quoted by arrangement. Your written quote fixes the price after measuring.
Typical jobGuide price inc VAT
Walk-in shower panel£395 – £695
Hinged door with in-line panel£795 – £1,295
Corner or full enclosure£995 – £1,595

Choosing your shower screens

Walk-in wet room panel

A single fixed glass panel with a bracing bar or floor channel, leaving an open entry and no door to clean or adjust.

Pivot door

A door that swings on pivots set in from its edge, useful where the swing space in front of the shower is limited.

Low-iron glass

Glass with less iron, which removes the green edge tint of standard glass and keeps tiles and stone looking their true colour.

Satin or tinted glass

Satin bands, full satin panels or grey and bronze tints that add privacy or style while still letting light into the shower.

Shower Screens in Norfolk: questions

How long does it take to fit a shower screen?

Most shower screens are fitted in a single visit once the glass has been made, which usually takes a couple of weeks after measuring. The silicone then needs time to cure, so you should wait before using the shower, and we tell you how long on the day. Your quote confirms the expected timescale.

When should my shower screen be measured?

Your screen should be measured once the walls are tiled and the tray or wet room floor is finished. The glass is made to follow the exact angles of the finished surfaces, and tiles, adhesive and trims all change the dimensions. If you are mid-renovation, we can advise on fixing positions and backing before tiling starts.

How do I stop limescale building up on shower glass?

The simplest habit is to squeegee the glass after every shower so water does not dry on it. Clean weekly with a mild, non-abrasive bathroom cleaner and a soft cloth, and rinse well. Avoid scouring pads, powders and strong descalers, which can scratch coatings, dull hinge finishes and break down silicone seals.

Can a shower screen be fitted to a stud or plasterboard wall?

Yes, provided the hinges and brackets fix into solid backing. On stud or plasterboard walls that usually means timber noggins behind the fixing points, or suitable heavy-duty fixings where noggins were not fitted. A heavy glass door on weak fixings can drop or pull away, so we check the wall during the survey.

Which parts of Norfolk do you cover for shower screens?

We cover the whole of Norfolk, including Norwich, Great Yarmouth, King's Lynn, Thetford and Dereham, and postcode areas IP, NR, PE. Building rules for shower screens here follow the regulations for England. Enter your postcode on the quote form and we will confirm cover; then a glazier will arrange a free survey before giving you a written quote.

Get a written quote in Norfolk

Free survey for new glazing, clear guide prices and one point of contact for every glazing job.

CallGet a quote