Wiltshire · England
Bespoke Mirrors in Wiltshire
Need a mirror wall for a gym, studio or salon in Wiltshire? We can quote for safety-backed mirror panels with neat joints, fixed with adhesive made for mirror backing.
- Guide from £205
- 8 towns covered
- Postcode areas BA, SN, SP
Wardrobe mirror doors across Wiltshire
The price depends on mirror size and thickness, the number of panels, the edge finish, tint or low-iron glass, safety backing, cut-outs and the fixing method. Gym walls, very large single sheets and difficult access also affect cost. See the guide prices for typical ranges.
To protect the edges, spray glass cleaner onto a soft cloth rather than directly onto the mirror, so liquid does not run down and soak into the bottom edge. Avoid harsh or abrasive cleaners, and dry the edges after cleaning in bathrooms.
Large mirrors are usually fixed with mirror adhesive and supported at the base by a slim channel or clips while the adhesive cures and afterwards. Smaller mirrors can be screw-fixed through drilled holes with decorative caps, which also lets them be removed later.
Safety backing is a sensible choice wherever someone could fall or knock against a mirror, such as sliding wardrobe doors, full-height mirrors, children's rooms, gyms and dance studios. We recommend it at survey wherever the position or use of the room suggests it.
Towns we cover for bespoke mirrors in Wiltshire
Choose your town for local details, nearby areas and the postcode districts we cover.
What applies in Wiltshire
Approved Document K requires safety glass in critical locations in England: glazing in doors and in side panels within 300 mm of a door, up to 1500 mm above floor level, and any glazing in walls or partitions up to 800 mm above floor level.
Wiltshire is inland, around 32 km from the nearest coast at its closest point, so salt exposure is rarely a factor.
Large mirrors for flats, salons and gyms often have to travel through narrow stairwells and small lifts, so walls may be covered in several panels with planned joints. Loading limits and building working hours can affect fitting times.
Guide prices
| Typical job | Guide price inc VAT |
|---|---|
| Polished mirror, 1200 × 900 mm | £205 – £265 |
| Safety-backed mirror, 1800 × 1000 mm | £365 – £465 |
| Gym mirror wall, 4000 × 2000 mm | £995 – £1,295 |
Choosing your bespoke mirrors
Heated demister pad
A thin heating pad bonded behind a bathroom mirror to keep an area clear of steam, wired in by a qualified electrician.
Bevelled edge
An angled border ground and polished around the edge that catches the light and frames the mirror without needing a separate frame.
Antique-effect mirror
Mirror with a deliberately aged, mottled finish, giving a vintage look for feature walls, alcoves and period-style rooms.
Low-iron mirror
Mirror made on low-iron glass, which reduces the slight green cast of standard glass for a brighter, more colour-accurate reflection.
Bespoke Mirrors in Wiltshire: questions
How should I clean a mirror without damaging it?
Spray glass cleaner onto a soft, lint-free cloth rather than directly onto the mirror, then wipe and buff dry. That stops liquid running down and soaking into the bottom edge, which is where black edges usually start. Avoid abrasive pads and harsh chemical cleaners, and dry the edges after cleaning in bathrooms.
Why do mirrors go black around the edges?
Black edges are corrosion of the silver layer behind the glass, usually caused by moisture or cleaning fluid getting into the edges, or by an adhesive that reacts with the backing. Bathrooms are especially at risk because of steam. The damage cannot be reversed, so the mirror needs replacing, ideally with better edge protection and a compatible adhesive.
How long does a bespoke mirror take?
Plain mirrors cut to size are often ready soon after measuring, while bevelled, tinted, safety-backed or shaped mirrors take longer to process. Fitting is usually completed in a single visit, though full gym or studio walls can take longer. Your written quote sets out the expected timescale, and we confirm the date when the mirror is ready.
Can a large mirror be fixed to plasterboard?
Often, yes, but it depends on the board, its fixings and the surface finish. Adhesive grips the paint or plaster layer, so flaky paint or weak skim can let go under the weight. We check the wall at survey and may add a base channel, mechanical fixings into studs, or a backing board to spread the load.
Which parts of Wiltshire do you cover for bespoke mirrors?
We cover the whole of Wiltshire, including Swindon, Salisbury, Trowbridge, Chippenham and Warminster, and postcode areas BA, SN, SP. Building rules for bespoke mirrors here follow the regulations for England. Enter your postcode on the quote form and we will confirm cover; then a glazier will arrange a free survey before giving you a written quote.
Other glazing services in Wiltshire
- Replacement Glass in Wiltshire
- Misted Glass Repair in Wiltshire
- Emergency Glazing in Wiltshire
- Safety Glass in Wiltshire
- Window Repairs in Wiltshire
- Window Film in Wiltshire
- uPVC Windows in Wiltshire
- Aluminium Windows in Wiltshire
- Sash Windows in Wiltshire
- Composite Doors in Wiltshire
- Bifold Doors in Wiltshire
- Sliding Doors in Wiltshire
- Secondary Glazing in Wiltshire
- Roof Lanterns in Wiltshire
- Glass Balustrades in Wiltshire
- Frameless Glass in Wiltshire
- Shower Screens in Wiltshire
- Glass Splashbacks in Wiltshire
- Glass Roofs in Wiltshire
- Shopfront Glazing in Wiltshire
- Curtain Walling in Wiltshire
- Glass Partitions in Wiltshire
- Property Glazing in Wiltshire
Get a written quote in Wiltshire
Free survey for new glazing, clear guide prices and one point of contact for every glazing job.