Wiltshire · England
Glass Splashbacks in Wiltshire
Our glaziers fit back-painted glass splashbacks in Wiltshire, using low-iron glass for pale colours so whites and creams look true to the sample you chose.
- Guide from £225
- 8 towns covered
- Postcode areas BA, SN, SP
Toughened glass splashback for homes and businesses in Wiltshire
Toughened glass cannot be cut or drilled after toughening, so every socket, switch, extractor and window-reveal cut-out is made beforehand. Sockets cannot be moved after the glass is ordered without remaking the panel, so electrical positions need to be final at templating.
Glass splashbacks have no grout lines to stain, so cleaning is simply a soft cloth with warm soapy water or a non-abrasive glass cleaner. Avoid scourers, abrasive creams and sharp scrapers, which can scratch the glass surface and dull the finish over time.
Our glaziers remove and refit socket and switch faceplates so the glass can sit behind them, with the power isolated first. Moving or adding sockets, or any other electrical alteration, needs a qualified electrician, ideally before the splashback is templated.
After templating, made-to-measure splashbacks are usually ready within a few weeks, depending on colour and finish. Fitting a typical kitchen takes part of a day, and the kitchen can normally be used again straight afterwards, though the silicone needs time to cure fully.
Towns we cover for glass splashbacks in Wiltshire
Choose your town for local details, nearby areas and the postcode districts we cover.
What applies in Wiltshire
Building regulations do not usually apply to this type of work, but we confirm anything that does in writing with your quote.
Wiltshire is inland, around 32 km from the nearest coast at its closest point, so salt exposure is rarely a factor.
Kitchens in flats and terraces often have narrow access and tight stairs, so long splashbacks may be split into shorter panels with planned joints. Parking for the fitting team and building rules on working hours can also affect scheduling.
Guide prices
| Typical job | Guide price inc VAT |
|---|---|
| Hob splashback, 900 × 750 mm | £225 – £285 |
| Run behind worktop, 2400 × 600 mm | £395 – £515 |
| Low-iron, 900 × 750 mm | £235 – £295 |
Choosing your glass splashbacks
Satin finish
Acid-etched glass with a soft, low-sheen face that reduces reflections and glare, useful opposite windows or bright lighting.
Printed design
A digitally printed image or pattern on the back of the glass, sealed behind it so the front stays smooth and wipeable.
Clear glass panel
Unpainted toughened glass over a painted wall or feature finish, protecting it from splashes while letting the surface behind show.
Low-iron glass
Glass with less iron, removing the green tint of standard glass so whites, creams and pale colours look true to the sample.
Glass Splashbacks in Wiltshire: questions
How long does it take to get a glass splashback fitted?
After templating, made-to-measure splashbacks are usually ready within a few weeks, depending on the colour and finish. Fitting a typical kitchen takes part of a day, and you can normally use the kitchen again once we have finished. The silicone needs time to cure fully, and we tell you how long on the day.
Can I fit a glass splashback myself?
It is possible, but the risks are mostly in measuring and handling. A small error in templating or a socket position means the toughened panel has to be remade, because it cannot be trimmed. Large panels are heavy and awkward to place without damaging worktops, and the adhesive must suit the painted back. We measure, make and fit as one job.
Can a glass splashback be fitted over existing tiles?
It is usually better to remove the tiles and make the wall good first. Glass needs a flat, sound surface for the adhesive to bond evenly, and grout lines, uneven tiles or loose tiles can show through or create stress points. Removing tiles also stops the glass standing too far forward of the worktop and sockets.
When should my glass splashback be measured?
Your splashback should be templated after the worktops, units and hob are installed and any electrical work is finished. The glass is made to the exact finished dimensions, including socket positions, so measuring from plans or before worktops go in often leads to panels that do not fit and have to be remade.
Which parts of Wiltshire do you cover for glass splashbacks?
We cover the whole of Wiltshire, including Swindon, Salisbury, Trowbridge, Chippenham and Warminster, and postcode areas BA, SN, SP. Building rules for glass splashbacks here follow the regulations for England. Enter your postcode on the quote form and we will confirm cover; then a glazier will arrange a free survey before giving you a written quote.
Other glazing services in Wiltshire
- Replacement Glass in Wiltshire
- Misted Glass Repair in Wiltshire
- Emergency Glazing in Wiltshire
- Safety Glass in Wiltshire
- Window Repairs in Wiltshire
- Window Film in Wiltshire
- uPVC Windows in Wiltshire
- Aluminium Windows in Wiltshire
- Sash Windows in Wiltshire
- Composite Doors in Wiltshire
- Bifold Doors in Wiltshire
- Sliding Doors in Wiltshire
- Secondary Glazing in Wiltshire
- Roof Lanterns in Wiltshire
- Glass Balustrades in Wiltshire
- Frameless Glass in Wiltshire
- Shower Screens in Wiltshire
- Bespoke Mirrors in Wiltshire
- Glass Roofs in Wiltshire
- Shopfront Glazing in Wiltshire
- Curtain Walling in Wiltshire
- Glass Partitions in Wiltshire
- Property Glazing in Wiltshire
Get a written quote in Wiltshire
Free survey for new glazing, clear guide prices and one point of contact for every glazing job.