Call 0800 088 6248

Wiltshire · England

Misted Glass Repair in Wiltshire

Clear glass again in Wiltshire: replacing blown double glazing units restores the view and a sealed cavity while your existing frames stay in place.

  • Guide from £155
  • 8 towns covered
  • Postcode areas BA, SN, SP

Get your free quote

Start with your postcode. A glazier will be in touch to arrange a free survey.

By sending this form you agree we can contact you about this enquiry. See our privacy policy for how we use your details.

No obligation. Prefer to talk? Call 0800 088 6248 or WhatsApp us.

Wiltshire: blown double glazing units

Early seal failure often shows only on cold mornings or after rain and clears during the day. As the desiccant fills, the mist lasts longer and white mineral staining can form on the inner faces. Staining inside the unit cannot be removed by cleaning from either side.

Some services offer to drill the glass, flush the cavity and add a vent instead of replacing the unit. This can improve the look, but it does not restore the original seal, and any gas fill that helped the unit insulate has already been lost. Replacement restores a sealed cavity.

The price of replacing misted units depends on the size of each unit, the glass specification, any bars or decorative features, how many units are done together, and access. Several units on one visit usually cost less each than separate visits for single windows.

A sealed unit has a spacer bar around its edge filled with desiccant, a drying agent that absorbs any moisture inside the cavity. When the edge seal fails, damp air keeps getting in until the desiccant is saturated, and condensation then forms between the panes where it cannot be wiped off.

Window with one misted double glazed pane beside a clear pane

Towns we cover for misted glass repair in Wiltshire

Choose your town for local details, nearby areas and the postcode districts we cover.

What applies in Wiltshire

Approved Document K requires safety glass in critical locations in England: glazing in doors and in side panels within 300 mm of a door, up to 1500 mm above floor level, and any glazing in walls or partitions up to 800 mm above floor level.

Approved Document L sets the minimum energy performance for replacement windows and doors in existing homes in England: a U-value of 1.4 W/m²K, or Window Energy Rating band B for windows; doors can instead meet a Door Set Energy Rating (band B, or band C for doors more than 60% glazed); rooflights need 2.2 W/m²K.

Wiltshire is inland, around 32 km from the nearest coast at its closest point, so salt exposure is rarely a factor.

In flats and terraced streets, replacing misted units often means planning access, parking and carrying units up stairs. Upper-floor windows may need to be done from inside, and conservation areas may require matching bars or glass patterns.

Guide prices

Guide prices inc VAT for typical jobs. Remote and island locations are quoted by arrangement. Your written quote fixes the price after measuring.
Typical jobGuide price inc VAT
One misted unit, 600 × 900 mm£155 – £195
Two misted units, 600 × 900 mm£305 – £395
Four misted units, 600 × 1100 mm£685 – £875
Misted unit in a door, toughened£305 – £385

Choosing your misted glass repair

Obscure glass unit

Patterned glass for bathrooms, landings and front doors, chosen to match existing obscure panes or to add privacy.

Toughened safety unit

Both panes toughened, for misted units in doors, beside doors or low down where safety glass is required.

Georgian bar or leaded

Decorative bars or lead designs remade to match the originals so the new unit lines up with neighbouring windows.

Low-E upgrade unit

A coated pane and gas-filled cavity that reduce heat loss compared with older plain glass units, fitted in the same frame.

Misted Glass Repair in Wiltshire: questions

Will a new unit match my other windows?

It can. The glazier records the unit thickness, spacer bar colour, any Georgian bars or leaded designs, and the obscure glass pattern if there is one. Most details can be matched closely. If an obscure pattern has been discontinued, the quote offers the closest available alternative so you can decide before anything is ordered.

How can I stop new sealed units misting early?

Keep the drainage slots at the bottom of the frame clear, so rainwater does not sit around the unit edges. Avoid pressure washing the seals, and do not paint over glazing gaskets. Check that opening sashes close properly, as a dropped sash can stress the unit. Report any cracked beads or failed gaskets early.

Are misted units covered by a guarantee?

Often they are, for a period after installation. Many sealed unit manufacturers guarantee against misting, and the terms are set out in the paperwork from the original installer. If your units are still covered, contact that installer first. Units we supply carry manufacturer guarantees, and the terms are confirmed in writing with your quote.

Why has condensation appeared between my double glazing panes?

Condensation between the panes means the edge seal of the sealed unit has failed. Damp air has got into the cavity, and the drying agent in the spacer bar can no longer absorb it. The cause is often age, water sitting in the frame, poor packing or strong sun on the frame. The fix is to replace the sealed unit.

Which parts of Wiltshire do you cover for misted glass repair?

We cover the whole of Wiltshire, including Swindon, Salisbury, Trowbridge, Chippenham and Warminster, and postcode areas BA, SN, SP. Building rules for misted glass repair here follow the regulations for England. Enter your postcode on the quote form and we will confirm cover; then a glazier will arrange a free survey before giving you a written quote.

Get a written quote in Wiltshire

Free survey for new glazing, clear guide prices and one point of contact for every glazing job.

CallGet a quote