Call 0800 088 6248

Oxfordshire · England

Composite Doors in Oxfordshire

Our glaziers fit composite front and back doors across Oxfordshire, removing the old frame, levelling the new doorset and explaining how the work is approved.

  • Guide from £1,295
  • 10 towns covered
  • Postcode areas OX, RG, SN

Get your free quote

Start with your postcode. A glazier will be in touch to arrange a free survey.

By sending this form you agree we can contact you about this enquiry. See our privacy policy for how we use your details.

No obligation. Prefer to talk? Call 0800 088 6248 or WhatsApp us.

Replacement front door in Oxfordshire

For easily accessible doors in new homes in England, Approved Document Q expects doorsets that resist forced entry, commonly shown by testing to PAS 24. Asking for a PAS 24 tested composite door is a practical benchmark when replacing a front or back door, even though the rule targets new dwellings.

Replacing a front door usually takes a day on site. The old door and frame are cut out, the new frame is fixed, packed and squared, the slab is hung and adjusted, and the frame is sealed outside and trimmed inside. Plaster around older frames sometimes needs making good afterwards.

A flat's entrance door that opens onto a shared stairwell or corridor is normally a fire door, so it should not be swapped for a standard composite door. Certified fire-rated composite doorsets are made for this purpose, and the freeholder or managing agent will usually need to agree the replacement.

In England, if the main entrance door of a home built in 1999 or later has a level threshold, the replacement should keep it level. Making access worse than when the house was built would not comply with the Building Regulations, so the glazier checks the existing threshold and specifies a low-threshold frame where needed.

Navy composite front door with a narrow glazed panel on a brick house

Towns we cover for composite doors in Oxfordshire

Choose your town for local details, nearby areas and the postcode districts we cover.

What applies in Oxfordshire

Approved Document K requires safety glass in critical locations in England: glazing in doors and in side panels within 300 mm of a door, up to 1500 mm above floor level, and any glazing in walls or partitions up to 800 mm above floor level.

If the glass sits in a fire-resisting door or screen, such as a flat entrance door or a commercial corridor screen, it must be replaced with fire-rated glazing tested as part of that system. Ordinary toughened glass is not a substitute.

Oxfordshire is inland, around 56 km from the nearest coast at its closest point, so salt exposure is rarely a factor.

Street-facing front doors in towns and cities face more passers-by, so anti-snap cylinders, laminated glass and letterplate guards are worth specifying. Conservation areas may control front door styles and colours, and flat entrance doors onto shared corridors normally need fire-rated doorsets.

Guide prices

Guide prices inc VAT for typical jobs. Remote and island locations are quoted by arrangement. Your written quote fixes the price after measuring.
Typical jobGuide price inc VAT
Composite front door, supplied and fitted£1,295 – £1,795
Door with one side panel£1,695 – £2,295
Door, side panel and top light£1,895 – £2,595

Choosing your composite doors

Insulated foam core

A lighter slab with a high-density foam core, offering good thermal performance and a wide range of styles.

Side panels and toplights

Glazed or solid panels beside or above the door to bring light into the hallway and fill wider openings.

Glass designs

Clear, obscure, bevelled or decorative glass in sealed cassettes, with toughened or laminated panes for safety and security.

Colours and dual colour

Woodgrain-textured skins in many colours, often with a different colour inside so the door suits both the street and the hallway.

Composite Doors in Oxfordshire: questions

What guarantee comes with a composite door?

Manufacturer guarantees apply to the door slab, frame, glass and locking hardware, and the terms are confirmed in writing. Guarantee terms for the installation are set out in writing with your quote, so you know what is covered before you go ahead. Keep the paperwork with your building regulations certificate for when you sell the property.

How much does a composite front door cost?

The cost of a composite door depends on the style, core type, colour, glass, side panels or toplights, hardware and lock specification, plus the condition of the opening. A plain door in a standard colour sits at the lower end, while doors with glazed side panels and premium hardware cost more. See the guide prices; the written quote fixes your price.

Can I change a flat's front door to a composite door?

It depends where the door is. A flat entrance door that opens onto a shared stairwell or corridor is normally a fire door, so only a certified fire-rated doorset is suitable. Leaseholders usually need the freeholder's or managing agent's agreement too. A flat door opening directly outside may be treated like a house door, so check first.

Can a composite door be fitted with a level threshold?

Yes, composite doors can be supplied with a low aluminium threshold for step-free or near step-free access. In England, where a house built in 1999 or later has a level threshold at the main entrance, the replacement should keep it. Low thresholds need good drainage and some shelter from driving rain, which the glazier checks at survey.

Which parts of Oxfordshire do you cover for composite doors?

We cover the whole of Oxfordshire, including Oxford, Banbury, Abingdon, Bicester and Didcot, and postcode areas OX, RG, SN. Building rules for composite doors here follow the regulations for England. Enter your postcode on the quote form and we will confirm cover; then a glazier will arrange a free survey before giving you a written quote.

Get a written quote in Oxfordshire

Free survey for new glazing, clear guide prices and one point of contact for every glazing job.

CallGet a quote