Hertfordshire · England

Frameless Glass in Hertfordshire

Our glaziers fit frameless glass doors and fixed screens in Hertfordshire for homes, offices and shops, matching the hardware finish to the room or shopfront.

Guide from £795
18 towns covered
Postcode areas AL, CM, EN, HP, SG, WD

About frameless glass doors in Hertfordshire

Fixed glass screens are held in slim channels or clamps at the floor, walls and ceiling, and the head fixing needs something solid to bite into. Walls and ceilings are rarely perfectly square, so templating records the true shape and the glass is made to follow it, keeping gaps even.

Toughened glass cannot be cut, drilled or notched once it has been toughened. Holes for patch fittings, cut-outs for locks and handles, and any shaped corners are all made before toughening, which is why we template the opening first and the glass is made to order rather than cut on site.

Frameless glass doors are usually made from 10mm or 12mm toughened safety glass, with the thickness chosen to suit the door height and its hardware. With no frame, the glass itself carries the hinges, handles and locks, so every fitting is specified together with the glass.

In England, Approved Document K treats glazing in a door within 1500mm of the floor, glazing within 300mm of a door edge and within 1500mm of the floor, and other glazing within 800mm of the floor as critical locations. Glass in these positions must break safely or be suitably protected.

Frameless glass doors and screens at an office reception

Towns we cover for frameless glass in Hertfordshire

Choose your town for local details, nearby areas and the postcode districts we cover.

What applies in Hertfordshire

Approved Document K requires safety glass in critical locations in England: glazing in doors and in side panels within 300 mm of a door, up to 1500 mm above floor level, and any glazing in walls or partitions up to 800 mm above floor level.

For shops and other non-domestic buildings in England, Approved Document M covers accessible entrances, and Approved Document K requires large areas of glass that people could walk into to carry manifestation (visible markings).

Hertfordshire is inland, around 39 km from the nearest coast at its closest point, so salt exposure is rarely a factor.

Older cottages and farmhouses rarely have square openings or level floors, so templating matters even more for frameless glass. Floors may also lack the depth for a floor spring, in which case top-hung sliding gear or wall hinges can suit better.

Guide prices

Guide prices inc VAT for typical jobs. Remote and island locations are quoted by arrangement. Your written quote fixes the price after measuring.
Typical job	Guide price inc VAT
Frameless glass door with fittings	£1,295 – £1,895
Door with fixed side screen	£2,195 – £3,195
Fixed frameless screen, about 2 m²	£795 – £1,095

Choosing your frameless glass

Pivot door with patches

Corner patch fittings with a floor spring or pivot, the usual choice for shop and office entrances and wide internal doors that need controlled closing.

Fixed glass screen

A non-opening panel held in slim channels or clamps, used to divide rooms, line stairs or form a side panel beside a glass door.

Frameless sliding door

A glass panel running on top-hung sliding gear across the opening, saving floor space where a swinging door would get in the way.

Low-iron glass

Glass with less iron, removing the green tint seen on the edges of standard glass, so thick panels look clearer and colours stay true.

Frameless Glass in Hertfordshire: questions

Do glass doors and screens need markings on them?

In buildings other than dwellings in England, large clear glass that people could walk into needs manifestation at two heights, 850–1000mm and 1400–1600mm from the floor. Workplace rules across Great Britain also require glass to be made apparent where needed. Homes are not covered by the manifestation guidance, though a frosted band can still be sensible.

Can a frameless glass door be fitted into my existing doorway?

Usually, yes. We survey the opening to check the head and walls can take the fixings, and template it so the glass follows any out-of-square edges. A floor spring needs a recess in the floor, so where that is not practical we may suggest a top pivot, wall hinges or sliding gear instead. Some making good of plaster may be needed.

What thickness of glass is used for frameless glass doors?

Frameless doors usually use 10mm or 12mm toughened safety glass. The thicker glass is generally used for taller or wider doors and for busy commercial entrances, while 10mm often suits internal doors in homes. The hardware maker's limits for panel weight and size also guide the choice, and we confirm the thickness in your written quote.

How do I look after a frameless glass door?

Clean the glass with a soft cloth and a non-abrasive glass cleaner, and wipe metal fittings with a damp cloth rather than harsh chemicals. Do not hang anything from the door or let it slam against a stop. If the door starts closing too hard or drops out of line, the floor spring or pivots can be adjusted before wear sets in.

Which parts of Hertfordshire do you cover for frameless glass?

We cover the whole of Hertfordshire, including Watford, Hemel Hempstead, Stevenage, St Albans and Welwyn Garden City, and postcode areas AL, CM, EN, HP, SG, WD. Building rules for frameless glass here follow the regulations for England. Enter your postcode on the quote form and we will confirm cover; then a glazier will arrange a free survey before giving you a written quote.

Other glazing services in Hertfordshire

All glazing in Hertfordshire · Frameless Glass Doors & Screens across the UK

Get a written quote in Hertfordshire

Free survey for new glazing, clear guide prices and one point of contact for every glazing job.

Get a guide price 0800 088 6248 WhatsApp