Call 0800 088 6248

Hertfordshire · England

Roof Lanterns in Hertfordshire

If your skylight in Hertfordshire drips with condensation or leaks around the frame, we can survey it and quote for a modern, thermally broken replacement.

  • Guide from £1,095
  • 18 towns covered
  • Postcode areas AL, CM, EN, HP, SG, WD

Get your free quote

Start with your postcode. A glazier will be in touch to arrange a free survey.

By sending this form you agree we can contact you about this enquiry. See our privacy policy for how we use your details.

No obligation. Prefer to talk? Call 0800 088 6248 or WhatsApp us.

Flat roof skylight in Hertfordshire

Opening skylights and lantern vents can be manual or electrically operated, often with a rain sensor that closes them automatically when it starts to rain. Electric vents need a power supply planned before plastering, so the wiring route is agreed at survey when an opening option is chosen.

In England, a rooflight on a house is usually permitted development if it projects no more than 150mm beyond the roof plane and is no higher than the highest part of the roof. Raised lanterns often stand taller than that, so check with the council before ordering.

Warm, moist air rises and collects in a roof lantern, so condensation can form on cold winter mornings, especially over kitchens and bathrooms. Thermally broken frames, warm-edge spacers and good room ventilation reduce it, and opening vents in the lantern can release warm air in summer.

Old polycarbonate or single glazed roof lanterns can be replaced with double glazed aluminium lanterns on the existing upstand, if the upstand is sound, level and the right size. Upstands that are rotten, uninsulated or out of level should be rebuilt first, which the survey identifies.

Roof lantern above a kitchen island in an open-plan extension

Towns we cover for roof lanterns in Hertfordshire

Choose your town for local details, nearby areas and the postcode districts we cover.

What applies in Hertfordshire

Approved Document K requires safety glass in critical locations in England: glazing in doors and in side panels within 300 mm of a door, up to 1500 mm above floor level, and any glazing in walls or partitions up to 800 mm above floor level.

If the glass sits in a fire-resisting door or screen, such as a flat entrance door or a commercial corridor screen, it must be replaced with fire-rated glazing tested as part of that system. Ordinary toughened glass is not a substitute.

Hertfordshire is inland, around 39 km from the nearest coast at its closest point, so salt exposure is rarely a factor.

Rural roofs collect more leaves, moss and bird debris, so lanterns need clear upstand drainage and regular checks. Exposed sites see higher wind loads and driving rain, and older outbuildings may need the roof structure strengthening before a lantern is added.

Guide prices

Guide prices inc VAT for typical jobs. Remote and island locations are quoted by arrangement. Your written quote fixes the price after measuring.
Typical jobGuide price inc VAT
Lantern 1500 × 1000 mm, fitted to a kerb£1,395 – £1,795
Lantern 2000 × 1000 mm£1,695 – £2,095
Lantern 3000 × 1500 mm£2,795 – £3,695
Flat glass rooflight 1000 × 1000 mm£1,095 – £1,395

Choosing your roof lanterns

Flat framed skylight

A low-profile framed rooflight on a flat roof upstand, fixed or opening, for bathrooms, landings and smaller rooms.

Square or octagonal lantern

A pyramid or eight-sided design that suits square rooms, orangeries and spaces where a central focal point is wanted.

Rectangular hipped lantern

A long ridge with hipped ends, suiting most rectangular extensions and kitchens, sized to the opening and the room below.

Opening vents

Manual or electric vents in the lantern or skylight, with optional rain sensors that close them automatically in wet weather.

Roof Lanterns in Hertfordshire: questions

How do I clean a roof lantern?

Self-cleaning coated glass lets rain lift most dirt, but a rinse with clean water in long dry spells helps. Clean from a safe position at the roof edge or from a suitable platform, never by standing on the lantern. Wipe the inside glass with mild soapy water, and keep leaves clear of the upstand and roof outlets.

Do I need planning permission for a roof lantern?

Sometimes. In England, rooflights on a house are usually permitted development if they project no more than 150mm above the roof plane and are no higher than the highest part of the roof. Raised lanterns often exceed that, and flats, listed buildings and conservation areas have extra controls, so check with your council first.

Will a roof lantern make my room too hot?

A roof lantern can add heat on sunny days, especially facing south or west, because overhead glass receives sun for much of the day. Solar-control glass, opening vents and blinds help keep the room comfortable. The glass is chosen at survey based on the lantern's size and orientation and how the room is used.

How much does a roof lantern cost?

The cost of a roof lantern depends on its size and shape, the glass specification, frame colour, any opening vents, and whether the upstand exists or needs building. Access to the roof and lifting a large lantern also affect labour. See the guide prices for typical ranges; the written quote fixes the price for your exact specification.

Which parts of Hertfordshire do you cover for roof lanterns?

We cover the whole of Hertfordshire, including Watford, Hemel Hempstead, Stevenage, St Albans and Welwyn Garden City, and postcode areas AL, CM, EN, HP, SG, WD. Building rules for roof lanterns here follow the regulations for England. Enter your postcode on the quote form and we will confirm cover; then a glazier will arrange a free survey before giving you a written quote.

Get a written quote in Hertfordshire

Free survey for new glazing, clear guide prices and one point of contact for every glazing job.

CallGet a quote