Call 0800 088 6248

Hertfordshire · England

Safety Glass in Hertfordshire

Our glaziers cover Hertfordshire for laminated glass that stays in place when broken, useful for overhead panels, ground-floor security and family homes.

  • Guide from £55
  • 18 towns covered
  • Postcode areas AL, CM, EN, HP, SG, WD

Get your free quote

Start with your postcode. A glazier will be in touch to arrange a free survey.

By sending this form you agree we can contact you about this enquiry. See our privacy policy for how we use your details.

No obligation. Prefer to talk? Call 0800 088 6248 or WhatsApp us.

Laminated safety glass in Hertfordshire

Edge finish affects both look and safety. Arrised edges are lightly sanded to take off sharpness and suit glass held in frames. Polished edges are smooth and clear for exposed edges on tables, shelves and frameless panels. Bevelled edges add a decorative angled border.

BS EN 12600 classifies safety glass by a pendulum impact test, with class 1 the highest and class 3 the lowest. In England, critical locations generally need at least class 3, and door or side panels wider than 900mm need class 2 or better.

Low-iron glass removes most of the slight green tint that ordinary clear glass shows at its edge and through thick panels. It suits tabletops, display shelves and splashback-style panels where true colours and a clearer edge matter.

In England, Approved Document K requires safety glass in critical locations: glass in a door or within 300mm of a door edge, up to 1500mm above the floor, and other glass within 800mm of the floor. The rules are similar elsewhere in the UK, but the detail differs.

Sheets of glass stored on a rack in a glass processing workshop

Towns we cover for safety glass in Hertfordshire

Choose your town for local details, nearby areas and the postcode districts we cover.

What applies in Hertfordshire

Approved Document K requires safety glass in critical locations in England: glazing in doors and in side panels within 300 mm of a door, up to 1500 mm above floor level, and any glazing in walls or partitions up to 800 mm above floor level.

Approved Document Q applies to new homes in England, where doors and windows are expected to meet PAS 24 or an equivalent standard. It does not apply to replacements in existing homes, but PAS 24 products are still a sensible choice.

Hertfordshire is inland, around 39 km from the nearest coast at its closest point, so salt exposure is rarely a factor.

Older rural homes often have internal doors and screens with old, unmarked glass. Upgrading them to toughened or laminated safety glass is common, and timber door frames may need careful beading when the new glass is fitted.

Guide prices

Guide prices inc VAT for typical jobs. Remote and island locations are quoted by arrangement. Your written quote fixes the price after measuring.
Typical jobGuide price inc VAT
6 mm toughened panel, 800 × 600 mm£55 – £75
10 mm toughened panel, 1000 × 2000 mm£325 – £415
Glass tabletop or shelf, 1200 × 600 mm, 8 mm£135 – £165
6.4 mm laminated panel, 900 × 900 mm£115 – £145

Choosing your safety glass

Holes and cut-outs

Drilled holes for handles, hinges and fixings, and cut-outs for sockets, all made before the glass is toughened.

Clear toughened glass

Heat-treated float glass that breaks into small, blunt pieces, for doors, screens, tabletops and shelves in a range of thicknesses.

Polished edges

Smooth, clear edges for exposed glass on tables, shelves and frameless panels, safer to handle and neater to look at.

Low-iron glass

Extra-clear glass with much less green tint, chosen for tabletops, shelving and panels where colour and edge clarity matter.

Safety Glass in Hertfordshire: questions

How do I know if my glass is safety glass?

Look for a permanent mark etched or printed in a corner of the pane. It should name the maker or supplier and the standard, such as BS EN 12150 for toughened glass, or show a BS EN 12600 class. Older glass may have no mark. If you are unsure, a glazier can check and advise.

Is laminated glass better for security?

Laminated glass usually gives better security than toughened glass of similar thickness, because the interlayer holds the glass together after it cracks, so making a hole takes more effort. Thicker interlayers and multi-layer laminates give more resistance. For ground-floor windows, shopfronts and doors, laminated glass is often chosen for this reason.

Why do I need to wait for toughened glass?

Toughened glass is made to order. Each panel is cut, edge-worked and drilled from float glass, then heated and cooled in a toughening furnace. It cannot be cut from stock once toughened. Your written quote shows the expected timescale, and the glazier will confirm fitting arrangements once the glass is ready.

Where is safety glass required in a house?

In England, safety glass is needed in critical locations: glass in doors and within 300mm of a door edge, up to 1500mm above floor level, and other glass within 800mm of the floor. Small panes and leaded lights have specific exceptions. The rules elsewhere in the UK are similar, but the detail differs between nations.

Which parts of Hertfordshire do you cover for safety glass?

We cover the whole of Hertfordshire, including Watford, Hemel Hempstead, Stevenage, St Albans and Welwyn Garden City, and postcode areas AL, CM, EN, HP, SG, WD. Building rules for safety glass here follow the regulations for England. Enter your postcode on the quote form and we will confirm cover; then a glazier will arrange a free survey before giving you a written quote.

Get a written quote in Hertfordshire

Free survey for new glazing, clear guide prices and one point of contact for every glazing job.

CallGet a quote