Call 0800 088 6248

Canterbury · Kent

Frameless Glass in Canterbury

Need a clear glass entrance for a shop or office in Canterbury? We can quote for frameless doors with floor springs, locks and the markings that busy entrances need.

  • CT1
  • CT2
  • CT5
  • CT6
  • Guide from £795

Get your free quote

Start with your postcode. A glazier will be in touch to arrange a free survey.

By sending this form you agree we can contact you about this enquiry. See our privacy policy for how we use your details.

No obligation. Prefer to talk? Call 0800 088 6248 or WhatsApp us.

Glass internal doors across Canterbury

Toughened glass can very occasionally break on its own because of nickel sulphide inclusions. Heat soak testing to BS EN 14179 reduces that risk by breaking flawed panels in the factory before delivery, though it cannot remove the risk entirely. It is often specified for large doors and screens in busy buildings.

Frameless doors run with small gaps at the edges and under the door, so they do not seal against sound or draughts the way a framed, gasketed door does. Clear seal strips can reduce the gaps, but where privacy or noise matters, an acoustic framed system may suit better.

The guidance in England asks for glass meeting Class 3 of BS EN 12600 in most critical locations, and the higher Class 2 where a door or door side panel is more than 900mm wide. Toughened glass for doors is made to suit, and Wales, Scotland and Northern Ireland have their own guidance.

Frameless glass doors are usually made from 10mm or 12mm toughened safety glass, with the thickness chosen to suit the door height and its hardware. With no frame, the glass itself carries the hinges, handles and locks, so every fitting is specified together with the glass.

Included as standard

  • Fitting, alignment and adjustment of closing speed
  • Manifestation where needed, final clean and care advice
  • Holes and cut-outs made at the factory before toughening
  • Templating for made-to-measure toughened glass
Frameless glass doors and screens at an office reception

Canterbury at a glance

Postcodes covered
CT1, CT2, CT5, CT6 and the surrounding area, including Whitstable, Herne Bay and Faversham
Coast
Canterbury sits roughly 11 km from the nearest coastline, close enough that exposure on open or high ground is worth considering. External frameless entrances near the sea face salt spray on patch fittings, pivots and floor spring covers, which can mark or pit finishes over time. Hardware suited to exposed sites, and rinsing fittings during routine cleaning, help them stay smooth and presentable.
Daylight and sun
In Canterbury the midwinter sun reaches about 15° above the horizon at noon, with roughly 7.6 hours of daylight, rising to about 62° and 16.4 hours in midsummer. Clear frameless doors and screens pass daylight deep into hallways and inner rooms. Where a screen faces low winter sun, glare and reflections can be strong, so satin bands or tinted glass can help, while low-iron glass keeps pale colours true.
Access and setting
Older cottages and farmhouses rarely have square openings or level floors, so templating matters even more for frameless glass. Floors may also lack the depth for a floor spring, in which case top-hung sliding gear or wall hinges can suit better.
Rules in England
Approved Document K requires safety glass in critical locations in England: glazing in doors and in side panels within 300 mm of a door, up to 1500 mm above floor level, and any glazing in walls or partitions up to 800 mm above floor level.

Guide prices in Canterbury

Guide prices inc VAT for typical jobs. Remote and island locations are quoted by arrangement. Your written quote fixes the price after measuring.
Typical jobGuide price inc VAT
Frameless glass door with fittings£1,295 – £1,895
Door with fixed side screen£2,195 – £3,195
Fixed frameless screen, about 2 m²£795 – £1,095

Get a guide price for your size

For shops and other non-domestic buildings in England, Approved Document M covers accessible entrances, and Approved Document K requires large areas of glass that people could walk into to carry manifestation (visible markings).

What you can choose

Glass-to-wall hinged door

Hinges clamp the glass directly to a wall or fixed glass panel. Suits lighter internal doors where there is no room for a floor spring.

Hardware finishes

Patch fittings, handles and hinges in satin or polished stainless steel, black or other finishes to match the room or shopfront.

Low-iron glass

Glass with less iron, removing the green tint seen on the edges of standard glass, so thick panels look clearer and colours stay true.

Frameless Glass in Canterbury: questions

Do glass doors and screens need markings on them?

In buildings other than dwellings in England, large clear glass that people could walk into needs manifestation at two heights, 850–1000mm and 1400–1600mm from the floor. Workplace rules across Great Britain also require glass to be made apparent where needed. Homes are not covered by the manifestation guidance, though a frosted band can still be sensible.

What thickness of glass is used for frameless glass doors?

Frameless doors usually use 10mm or 12mm toughened safety glass. The thicker glass is generally used for taller or wider doors and for busy commercial entrances, while 10mm often suits internal doors in homes. The hardware maker's limits for panel weight and size also guide the choice, and we confirm the thickness in your written quote.

Can a frameless glass door be fitted into my existing doorway?

Usually, yes. We survey the opening to check the head and walls can take the fixings, and template it so the glass follows any out-of-square edges. A floor spring needs a recess in the floor, so where that is not practical we may suggest a top pivot, wall hinges or sliding gear instead. Some making good of plaster may be needed.

What happens if a frameless glass door breaks?

Toughened glass breaks into small, blunt pieces rather than large shards, so the door will need to be fully replaced rather than repaired. We can make the opening safe and secure in the meantime, then remake the panel from the original measurements or a fresh template, with holes and cut-outs formed before toughening.

Do you cover Canterbury for frameless glass?

Yes. We can quote for frameless glass across Canterbury and the surrounding Kent area, including postcode districts CT1, CT2, CT5 and CT6, and nearby Whitstable, Herne Bay and Faversham. Start with your postcode on the quote form and a glazier will arrange a free survey before giving you a written quote.

Get a written quote in Canterbury

Free survey for new glazing, clear guide prices and one point of contact for every glazing job.

CallGet a quote