Whitstable · Kent
Frameless Glass in Whitstable
We cover Whitstable and Kent for frameless glass doors and screens, from internal room dividers to shop entrances, with every job surveyed and quoted in writing first.
- CT5
- Guide from £795
Frameless glass screens across Whitstable
For buildings other than dwellings in England, access guidance says a manual door should open with no more than 30N of force at its edge from closed to 30 degrees, and 22.5N from 30 to 60 degrees. Heavy glass doors and closers are set up with that limit in mind.
Fixed glass screens are held in slim channels or clamps at the floor, walls and ceiling, and the head fixing needs something solid to bite into. Walls and ceilings are rarely perfectly square, so templating records the true shape and the glass is made to follow it, keeping gaps even.
A floor spring sits in a steel box set into the floor below the door, controlling closing speed and hold-open. It needs a recess cut into the screed, so it is far simpler to plan before tiles, stone or timber flooring are laid than to retrofit later.
Toughened glass can very occasionally break on its own because of nickel sulphide inclusions. Heat soak testing to BS EN 14179 reduces that risk by breaking flawed panels in the factory before delivery, though it cannot remove the risk entirely. It is often specified for large doors and screens in busy buildings.
Included as standard
- Templating for made-to-measure toughened glass
- Manifestation where needed, final clean and care advice
- Survey of the opening, floor and fixing points
- Fitting, alignment and adjustment of closing speed
Whitstable at a glance
- Postcodes covered
- CT5 and the surrounding area, including Herne Bay, Canterbury and Faversham
- Coast
- Whitstable is about 1 km from the coast or a tidal estuary, so salt air and wind-driven rain are worth planning for. External frameless entrances near the sea face salt spray on patch fittings, pivots and floor spring covers, which can mark or pit finishes over time. Hardware suited to exposed sites, and rinsing fittings during routine cleaning, help them stay smooth and presentable.
- Daylight and sun
- In Whitstable the midwinter sun reaches about 15° above the horizon at noon, with roughly 7.6 hours of daylight, rising to about 62° and 16.4 hours in midsummer. Clear frameless doors and screens pass daylight deep into hallways and inner rooms. Where a screen faces low winter sun, glare and reflections can be strong, so satin bands or tinted glass can help, while low-iron glass keeps pale colours true.
- Access and setting
- Older cottages and farmhouses rarely have square openings or level floors, so templating matters even more for frameless glass. Floors may also lack the depth for a floor spring, in which case top-hung sliding gear or wall hinges can suit better.
- Rules in England
- Approved Document K requires safety glass in critical locations in England: glazing in doors and in side panels within 300 mm of a door, up to 1500 mm above floor level, and any glazing in walls or partitions up to 800 mm above floor level.
Guide prices in Whitstable
| Typical job | Guide price inc VAT |
|---|---|
| Frameless glass door with fittings | £1,295 – £1,895 |
| Door with fixed side screen | £2,195 – £3,195 |
| Fixed frameless screen, about 2 m² | £795 – £1,095 |
Get a guide price for your size
For shops and other non-domestic buildings in England, Approved Document M covers accessible entrances, and Approved Document K requires large areas of glass that people could walk into to carry manifestation (visible markings).
What you can choose
Frameless sliding door
A glass panel running on top-hung sliding gear across the opening, saving floor space where a swinging door would get in the way.
Low-iron glass
Glass with less iron, removing the green tint seen on the edges of standard glass, so thick panels look clearer and colours stay true.
Pivot door with patches
Corner patch fittings with a floor spring or pivot, the usual choice for shop and office entrances and wide internal doors that need controlled closing.
Frameless Glass in Whitstable: questions
How long does it take to get a frameless glass door fitted?
Once the opening is templated, the glass is made to order and toughened, which usually takes a few weeks. Fitting a single door or screen is normally done in a day, while larger entrances or runs of screens take longer. Your written quote sets out the expected programme, and we confirm the date when the glass is ready.
Can a frameless glass door be locked?
Yes. A patch lock at the bottom of the door shoots a bolt into a keep in the floor, and a centre lock can join a pair of doors. A glass door does not offer the same resistance as a solid door, so for external entrances you may also want shutters, an alarm or laminated security glass in adjoining screens.
Will a frameless glass door block noise and draughts?
Only partly. Frameless doors run with small gaps at the sides and bottom so the glass can swing freely, which lets some sound and air through. Clear seal strips can narrow the gaps. If you need a quiet meeting room or a draught-free external entrance, a framed or acoustic glazed system will perform better, and we can quote for both.
Can a frameless glass door be fitted into my existing doorway?
Usually, yes. We survey the opening to check the head and walls can take the fixings, and template it so the glass follows any out-of-square edges. A floor spring needs a recess in the floor, so where that is not practical we may suggest a top pivot, wall hinges or sliding gear instead. Some making good of plaster may be needed.
Do you cover Whitstable for frameless glass?
Yes. We can quote for frameless glass across Whitstable and the surrounding Kent area, including postcode districts CT5, and nearby Herne Bay, Canterbury and Faversham. Start with your postcode on the quote form and a glazier will arrange a free survey before giving you a written quote.
Get a written quote in Whitstable
Free survey for new glazing, clear guide prices and one point of contact for every glazing job.