Wells · Somerset
Glass Balustrades in Wells
Our glaziers fit glass balustrades for homes and commercial buildings in Wells, using laminated toughened glass for frameless runs and matching rails and fittings to the space.
- BA5
- Guide from £1,095
Glass balcony balustrade in Wells: what to know
Where a building may be used by children under five, the guidance in England says guarding should not let a 100mm sphere pass through any opening and should not be easy to climb. Solid glass helps on both counts, but gaps between panels, posts, walls and the floor still need checking.
The interlayer inside laminated glass decides how a broken panel behaves. Standard PVB holds the fragments together but can let a fully broken panel sag, while stiffer structural interlayers help it stay upright. The right choice depends on whether a handrail is fitted and how exposed the balustrade is.
Under the guidance used in England, guarding is generally expected where there is a drop of more than 600mm in or around a dwelling, or more than 380mm in other buildings. Below those drops a glass screen is a design choice rather than a requirement, though the glass still has to suit its position.
Glass guarding must resist the horizontal loads set for how the space is used, and those loads rise from a private home to offices, shops and busy public areas. Glass thickness, fixing system and anchors are matched to that load, so a system suited to a house stair may not suit a bar terrace.
What's included
- Final clean, film removal and care advice
- Toughened or laminated safety glass to the agreed specification
- Templating and measuring for made-to-measure glass panels
- Site survey, including a check of the structure behind fixings
Wells at a glance
- Postcodes covered
- BA5 and the surrounding area, including Shepton Mallet, Street and Frome
- Coast
- Wells is well inland, around 25 km from the nearest coast, so salt exposure is not usually a factor.
- Daylight and sun
- In Wells the midwinter sun reaches about 15° above the horizon at noon, with roughly 7.6 hours of daylight, rising to about 62° and 16.4 hours in midsummer. Glass guarding on a sunny balcony brings in heat and glare as well as the view. Tinted or satin glass can soften low winter sun on a terrace, while low-iron glass keeps colours true on north-facing spaces where every bit of daylight counts.
- Access and setting
- Older rural homes often have uneven floors, timber structures and stone walls, all of which affect how channels and posts are fixed. Exposed decks and hillside terraces also face strong wind, so the glass and fixing system are chosen for that exposure.
- Rules in England
- Approved Document K requires safety glass in critical locations in England: glazing in doors and in side panels within 300 mm of a door, up to 1500 mm above floor level, and any glazing in walls or partitions up to 800 mm above floor level.
Guide prices in Wells
| Typical job | Guide price inc VAT |
|---|---|
| Frameless, 3 m run | £1,095 – £1,395 |
| Frameless, 6 m run | £2,195 – £2,795 |
| Post and clamp, 6 m run | £1,395 – £1,695 |
Get a guide price for your size
Approved Document K sets minimum guarding heights in England, typically 900 mm for internal stairs and landings and 1100 mm for balconies and external edges of homes. Glass guarding must be designed to resist the loads set out in BS 6180 and the loading standards it refers to.
What you can choose
Top handrail
A capping rail along the top edge in stainless steel, aluminium or timber, which ties panels together and gives a firm hand hold.
Low-iron glass
Glass with less iron, which removes the green tint seen on the edges of standard glass, most noticeable in thick laminated panels.
Spigot fixed
Individual spigots hold each panel at its base instead of a continuous channel. Common on decking, around pools and in gardens.
Glass Balustrades in Wells: questions
Can a glass balustrade be fitted to timber decking?
Yes, but the deck frame usually needs strengthening first. Glass guarding puts significant load into its fixings, and ordinary deck joists are not designed to take it. We check the frame at survey and may recommend steel brackets, extra blocking, or a post or spigot system instead of a long continuous channel.
What happens if a balustrade panel breaks?
With laminated glass, the broken panel is held together by its interlayer and should stay in place until it is replaced. With toughened-only glass, the panel breaks into small pieces and the handrail becomes the barrier. Either way, keep people away from the edge and contact us so we can make the area safe and remake the panel to size.
Is outdoor balustrade glass hard to keep clean?
Outdoor glass collects rain marks, pollen and dust, so expect to clean it about as often as your windows. A soft cloth, warm water and a non-abrasive cleaner are enough. Avoid scouring pads and harsh chemicals on both the glass and the stainless or powder-coated fittings, and rinse grit and salt out of channels.
How thick does the glass in a balustrade need to be?
Glass thickness depends on the fixing system, the panel height and the load the barrier must resist, so there is no single answer. Frameless channel systems commonly use thick laminated toughened glass, such as 21.5mm, while post and clamp systems often use thinner glass. The system maker's tested data sets the minimum, and we specify from that.
Do you cover Wells for glass balustrades?
Yes. We can quote for glass balustrades across Wells and the surrounding Somerset area, including postcode districts BA5, and nearby Shepton Mallet, Street and Frome. Start with your postcode on the quote form and a glazier will arrange a free survey before giving you a written quote.
Get a written quote in Wells
Free survey for new glazing, clear guide prices and one point of contact for every glazing job.