Call 0800 088 6248

Brighton & Hove · East Sussex

Glass Roofs in Brighton & Hove

Looking for a glass roof in Brighton & Hove? We can quote for structural glass roofs, fixed frameless rooflights and walk-on glass panels made to your design.

  • BN1
  • BN3
  • BN2
  • Guide from £1,095 per m²

Get your free quote

Start with your postcode. A glazier will be in touch to arrange a free survey.

By sending this form you agree we can contact you about this enquiry. See our privacy policy for how we use your details.

No obligation. Prefer to talk? Call 0800 088 6248 or WhatsApp us.

Side return glass roof across Brighton & Hove

Glass roofs need regular cleaning from safe access, never by standing on non-walk-on glass. Silicone joints between panes should be inspected for splits, gutters and outlets kept clear, and any chips or scratches on walk-on panels checked, because the top layer is designed to protect the layers below.

Fixed frameless rooflights sit on a flat roof upstand with the glass edge overhanging the kerb, so from inside you see only sky and plaster. The upstand must be level, insulated and weathered into the roof covering, and the roof needs a fall so water drains off the glass.

In England, Approved Document L sets a limiting U-value of 2.2 W/m²K for rooflights, calculated in the horizontal position. Frameless glass roofs and fixed rooflights are usually specified with low-E double or triple glazed units, and their declared performance should be checked against this before ordering.

Overhead glass collects heat in summer. Solar-control coatings, low-E coatings and fritted patterns reduce heat and glare under south and west-facing roofs, while opening rooflights or vents elsewhere help warm air escape. Self-cleaning outer coatings reduce how often the glass needs washing.

Included as standard

  • Weather sealing of joints, edges and upstands
  • Written guarantee terms and manufacturer documentation
  • Coordination with engineers or builders where required
  • Lifting, positioning and fixing of every glass unit
Glass roof over a side-return kitchen extension with an exposed brick wall

Working in Brighton & Hove

Postcodes covered
BN1, BN3, BN2 and the surrounding area, including Burgess Hill, Worthing and Seaford
Coast
Brighton & Hove is about 1 km from the coast or a tidal estuary, so salt air and wind-driven rain are worth planning for. Glass roofs near the coast collect salt film that self-cleaning coatings may not fully remove, so occasional rinsing helps. Exposed sites face higher wind uplift, which affects glass thickness and fixings, and any metal supports need coatings or grades suited to salt air.
Daylight and sun
In Brighton & Hove the midwinter sun reaches about 16° above the horizon at noon, with roughly 7.7 hours of daylight, rising to about 63° and 16.3 hours in midsummer. Overhead glass admits far more daylight than vertical glazing, especially in summer when the sun is high. South-facing glass roofs usually need solar-control coatings or fritting, while north-facing roofs can use clearer low-E glass to maximise winter light.
Access and setting
City glass roofs often need cranes or lifting robots, so road or pavement licences, parking suspensions and access over neighbouring property may be needed. Side returns usually sit on a boundary, so fire performance and neighbour matters should be checked early.
Rules in England
Approved Document K requires safety glass in critical locations in England: glazing in doors and in side panels within 300 mm of a door, up to 1500 mm above floor level, and any glazing in walls or partitions up to 800 mm above floor level.

Guide prices in Brighton & Hove

Guide prices inc VAT for typical jobs. Remote and island locations are quoted by arrangement. Your written quote fixes the price after measuring.
Typical jobGuide price inc VAT
Frameless glass roof, per m²£1,095 – £1,795
Walk-on glass panel, per m²£1,495 – £2,395

Get a guide price for your size

Approved Document L sets the minimum energy performance for replacement windows and doors in existing homes in England: a U-value of 1.4 W/m²K, or Window Energy Rating band B for windows; doors can instead meet a Door Set Energy Rating (band B, or band C for doors more than 60% glazed); rooflights need 2.2 W/m²K.

Choosing your glass roofs

Glass beams and fins

Laminated glass supporting beams instead of steel, keeping the whole roof transparent where spans and loads allow.

Glass floor panel

Laminated glass floor sections that let light through to a basement or lower floor, supported on a level, engineered frame.

Solar-control coatings

Coatings or fritted patterns that reduce heat gain and glare under overhead glass on sunny elevations.

Glass Roofs in Brighton & Hove: questions

Do I need planning permission for a glass roof extension?

It depends on the extension and the property. Some single-storey extensions on houses fall under permitted development, while others need planning permission. Flats, listed buildings and homes in conservation areas or under Article 4 directions have additional controls. Check with your council or an architect early, before the glass is ordered.

What guarantee comes with a glass roof?

Manufacturer guarantees apply to the glass units, coatings and any framing or fixings, and the terms are confirmed in writing. Supports built by others are covered by their own builder's terms. Guarantee terms for our installation are set out in writing with your quote, so you know what is covered and who is responsible before work begins.

Does a glass roof need building regulations approval?

Yes. A new glass roof, frameless rooflight or walk-on panel is building work that normally needs approval through building control, covering structure, energy performance and fire performance near a boundary. Highly glazed extensions often need energy calculations to show compliance. The rules differ between England, Wales, Scotland and Northern Ireland, and we explain the route for your project.

How is a glass roof installed?

A glass roof is installed onto supports already built and checked, such as walls, steel beams, glass beams or upstands. The glass units are lifted with a crane, glass robot or vacuum lifters, set onto gaskets or setting blocks, fixed and then weather sealed. Most domestic roofs are installed in a day or two once supports are ready.

Do you cover Brighton & Hove for glass roofs?

Yes. We can quote for glass roofs across Brighton & Hove and the surrounding East Sussex area, including postcode districts BN1, BN3 and BN2, and nearby Burgess Hill, Worthing and Seaford. Start with your postcode on the quote form and a glazier will arrange a free survey before giving you a written quote.

Get a written quote in Brighton & Hove

Free survey for new glazing, clear guide prices and one point of contact for every glazing job.

CallGet a quote