Cheshire · England
Glass Splashbacks in Cheshire
Looking for a glass splashback in Cheshire? Our glaziers can template your finished kitchen and quote for toughened, back-painted glass made with every socket cut-out in place.
- Guide from £225
- 11 towns covered
- Postcode areas CH, CW, SK, SY, WA
Cheshire: coloured glass splashback
Toughened glass cannot be cut or drilled after toughening, so every socket, switch, extractor and window-reveal cut-out is made beforehand. Sockets cannot be moved after the glass is ordered without remaking the panel, so electrical positions need to be final at templating.
Splashbacks are made from toughened glass because it copes with heat from a hob and with the stress around socket cut-outs far better than ordinary glass. Untoughened coloured glass is more prone to cracking behind a hob or across a cut-out, so we only fit toughened panels.
Splashbacks are templated once the worktops, units and hob are fitted, not from kitchen plans. Worktop heights, wall angles and socket positions often move during installation, and the glass is made to the finished dimensions so edges line up and gaps stay even.
Our glaziers remove and refit socket and switch faceplates so the glass can sit behind them, with the power isolated first. Moving or adding sockets, or any other electrical alteration, needs a qualified electrician, ideally before the splashback is templated.
Towns we cover for glass splashbacks in Cheshire
Choose your town for local details, nearby areas and the postcode districts we cover.
What applies in Cheshire
Building regulations do not usually apply to this type of work, but we confirm anything that does in writing with your quote.
Cheshire has its own coastline, so for homes and businesses near the sea, salt air and wind-driven rain are part of the brief. Splashbacks sit indoors, so the coast affects them little, but kitchens in damp coastal homes can see condensation on cold external walls. The wall needs to be dry and sound before bonding, and good extraction helps keep edges and silicone clean.
Kitchens in flats and terraces often have narrow access and tight stairs, so long splashbacks may be split into shorter panels with planned joints. Parking for the fitting team and building rules on working hours can also affect scheduling.
Guide prices
| Typical job | Guide price inc VAT |
|---|---|
| Hob splashback, 900 × 750 mm | £225 – £285 |
| Run behind worktop, 2400 × 600 mm | £395 – £515 |
| Low-iron, 900 × 750 mm | £235 – £295 |
Choosing your glass splashbacks
Back-painted colour
Toughened glass painted on the back in a matched colour, giving a smooth, glossy finish in almost any shade to suit units or walls.
Metallic or sparkle finish
Back-painted glass with metallic or fine sparkle effects, adding depth and reflection without the upkeep of polished metal.
Satin finish
Acid-etched glass with a soft, low-sheen face that reduces reflections and glare, useful opposite windows or bright lighting.
Clear glass panel
Unpainted toughened glass over a painted wall or feature finish, protecting it from splashes while letting the surface behind show.
Glass Splashbacks in Cheshire: questions
Why does my white glass splashback look slightly green?
Standard glass contains iron, which gives it a green tint that shows through pale back-painted colours, particularly white and cream. Low-iron glass has much less iron, so the colour behind looks close to the painted sample. If you are choosing a light colour, it is worth specifying low-iron glass from the start.
When should my glass splashback be measured?
Your splashback should be templated after the worktops, units and hob are installed and any electrical work is finished. The glass is made to the exact finished dimensions, including socket positions, so measuring from plans or before worktops go in often leads to panels that do not fit and have to be remade.
Can a glass splashback go behind a hob?
Yes, provided it is toughened glass and the hob maker's clearances are followed. Toughened glass copes with the heat from a hob far better than ordinary glass, and it is what we fit behind cookers. Some gas hobs need a minimum gap to the wall, so we check your hob's instructions before the glass is ordered.
How long does it take to get a glass splashback fitted?
After templating, made-to-measure splashbacks are usually ready within a few weeks, depending on the colour and finish. Fitting a typical kitchen takes part of a day, and you can normally use the kitchen again once we have finished. The silicone needs time to cure fully, and we tell you how long on the day.
Which parts of Cheshire do you cover for glass splashbacks?
We cover the whole of Cheshire, including Warrington, Chester, Crewe, Ellesmere Port and Widnes, and postcode areas CH, CW, SK, SY, WA. Building rules for glass splashbacks here follow the regulations for England. Enter your postcode on the quote form and we will confirm cover; then a glazier will arrange a free survey before giving you a written quote.
Other glazing services in Cheshire
- Replacement Glass in Cheshire
- Misted Glass Repair in Cheshire
- Emergency Glazing in Cheshire
- Safety Glass in Cheshire
- Window Repairs in Cheshire
- Window Film in Cheshire
- uPVC Windows in Cheshire
- Aluminium Windows in Cheshire
- Sash Windows in Cheshire
- Composite Doors in Cheshire
- Bifold Doors in Cheshire
- Sliding Doors in Cheshire
- Secondary Glazing in Cheshire
- Roof Lanterns in Cheshire
- Glass Balustrades in Cheshire
- Frameless Glass in Cheshire
- Shower Screens in Cheshire
- Bespoke Mirrors in Cheshire
- Glass Roofs in Cheshire
- Shopfront Glazing in Cheshire
- Curtain Walling in Cheshire
- Glass Partitions in Cheshire
- Property Glazing in Cheshire
Get a written quote in Cheshire
Free survey for new glazing, clear guide prices and one point of contact for every glazing job.