North Yorkshire · England
Glass Splashbacks in North Yorkshire
Want a wipe-clean wall behind a basin or vanity in North Yorkshire? We can quote for toughened glass splashbacks in colours, satin finishes or clear glass over a feature wall.
- Guide from £225
- 11 towns covered
- Postcode areas BD, DL, HG, LS, TS, YO
About glass splashbacks in North Yorkshire
Our glaziers remove and refit socket and switch faceplates so the glass can sit behind them, with the power isolated first. Moving or adding sockets, or any other electrical alteration, needs a qualified electrician, ideally before the splashback is templated.
Toughened glass cannot be cut or drilled after toughening, so every socket, switch, extractor and window-reveal cut-out is made beforehand. Sockets cannot be moved after the glass is ordered without remaking the panel, so electrical positions need to be final at templating.
Splashbacks are templated once the worktops, units and hob are fitted, not from kitchen plans. Worktop heights, wall angles and socket positions often move during installation, and the glass is made to the finished dimensions so edges line up and gaps stay even.
Long runs and tall walls are usually made from more than one panel, because large sheets are heavy and hard to carry through houses. Joints are planned at corners, behind the hob centre line or at natural breaks, and are finished with a thin, neat silicone line.

Towns we cover for glass splashbacks in North Yorkshire
Choose your town for local details, nearby areas and the postcode districts we cover.
What applies in North Yorkshire
Building regulations do not usually apply to this type of work, but we confirm anything that does in writing with your quote.
North Yorkshire has its own coastline, so for homes and businesses near the sea, salt air and wind-driven rain are part of the brief. Splashbacks sit indoors, so the coast affects them little, but kitchens in damp coastal homes can see condensation on cold external walls. The wall needs to be dry and sound before bonding, and good extraction helps keep edges and silicone clean.
Kitchens in flats and terraces often have narrow access and tight stairs, so long splashbacks may be split into shorter panels with planned joints. Parking for the fitting team and building rules on working hours can also affect scheduling.
Guide prices
| Typical job | Guide price inc VAT |
|---|---|
| Hob splashback, 900 × 750 mm | £225 – £285 |
| Run behind worktop, 2400 × 600 mm | £395 – £515 |
| Low-iron, 900 × 750 mm | £235 – £295 |
Choosing your glass splashbacks
Back-painted colour
Toughened glass painted on the back in a matched colour, giving a smooth, glossy finish in almost any shade to suit units or walls.
Metallic or sparkle finish
Back-painted glass with metallic or fine sparkle effects, adding depth and reflection without the upkeep of polished metal.
Low-iron glass
Glass with less iron, removing the green tint of standard glass so whites, creams and pale colours look true to the sample.
Clear glass panel
Unpainted toughened glass over a painted wall or feature finish, protecting it from splashes while letting the surface behind show.
Glass Splashbacks in North Yorkshire: questions
Can a glass splashback be fitted over existing tiles?
It is usually better to remove the tiles and make the wall good first. Glass needs a flat, sound surface for the adhesive to bond evenly, and grout lines, uneven tiles or loose tiles can show through or create stress points. Removing tiles also stops the glass standing too far forward of the worktop and sockets.
Can I fit a glass splashback myself?
It is possible, but the risks are mostly in measuring and handling. A small error in templating or a socket position means the toughened panel has to be remade, because it cannot be trimmed. Large panels are heavy and awkward to place without damaging worktops, and the adhesive must suit the painted back. We measure, make and fit as one job.
When should my glass splashback be measured?
Your splashback should be templated after the worktops, units and hob are installed and any electrical work is finished. The glass is made to the exact finished dimensions, including socket positions, so measuring from plans or before worktops go in often leads to panels that do not fit and have to be remade.
How long does it take to get a glass splashback fitted?
After templating, made-to-measure splashbacks are usually ready within a few weeks, depending on the colour and finish. Fitting a typical kitchen takes part of a day, and you can normally use the kitchen again once we have finished. The silicone needs time to cure fully, and we tell you how long on the day.
Which parts of North Yorkshire do you cover for glass splashbacks?
We cover the whole of North Yorkshire, including York, Middlesbrough, Harrogate, Scarborough and Redcar, and postcode areas BD, DL, HG, LS, TS, YO. Building rules for glass splashbacks here follow the regulations for England. Enter your postcode on the quote form and we will confirm cover; then a glazier will arrange a free survey before giving you a written quote.
Other glazing services in North Yorkshire
- Replacement Glass in North Yorkshire
- Misted Glass Repair in North Yorkshire
- Emergency Glazing in North Yorkshire
- Safety Glass in North Yorkshire
- Window Repairs in North Yorkshire
- Window Film in North Yorkshire
- uPVC Windows in North Yorkshire
- Aluminium Windows in North Yorkshire
- Sash Windows in North Yorkshire
- Composite Doors in North Yorkshire
- Bifold Doors in North Yorkshire
- Sliding Doors in North Yorkshire
- Secondary Glazing in North Yorkshire
- Roof Lanterns in North Yorkshire
- Glass Balustrades in North Yorkshire
- Frameless Glass in North Yorkshire
- Shower Screens in North Yorkshire
- Bespoke Mirrors in North Yorkshire
- Glass Roofs in North Yorkshire
- Shopfront Glazing in North Yorkshire
- Curtain Walling in North Yorkshire
- Glass Partitions in North Yorkshire
- Property Glazing in North Yorkshire
All glazing in North Yorkshire · Glass Splashbacks across the UK
Get a written quote in North Yorkshire
Free survey for new glazing, clear guide prices and one point of contact for every glazing job.