Reigate · Surrey
Property Glazing in Reigate
If your portfolio in Reigate needs one glazing contact, we can quote for each job in writing and match every invoice to your reference.
- RH2
- RH1
- RH3
- Guide from £165
Landlord glass repairs in Reigate
The Housing Health and Safety Rating System is used by councils in England to assess hazards in homes. Its hazards include collision and entrapment, which covers glazing, falls between levels, which covers windows, and entry by intruders. Broken glass and faulty window locks can fall under these headings.
A planned glazing survey checks each property for unmarked glass in critical locations, misted units, cracked panes, failed hinges and locks, and missing restrictors. The resulting schedule lets you budget and prioritise, rather than reacting to faults one at a time.
Glass replaced in doors, beside doors and at low level should be safety glass in critical locations. In England, Approved Document K sets out these locations. Recording that safety glass was fitted, and keeping the photo of its marking, helps show the property was kept safe.
Every job gets its own written quote that fixes the price for the specification shown. The quote can carry your purchase order or job reference, so it matches your system. Work beyond the quote, such as extra panes found on site, is quoted separately before it goes ahead.
What you get
- Make-safe boarding and permanent glass where needed
- Invoice matching the approved quote
- One point of contact for all glazing jobs
- Tenant access arranged directly when you authorise
Working in Reigate
- Postcodes covered
- RH2, RH1, RH3 and the surrounding area, including Redhill, Horley and Banstead
- Coast
- Reigate is well inland, around 45 km from the nearest coast, so salt exposure is not usually a factor.
- Daylight and sun
- In Reigate the midwinter sun reaches about 15° above the horizon at noon, with roughly 7.6 hours of daylight, rising to about 62° and 16.4 hours in midsummer. South and west-facing flats can overheat and suffer glare, which tenants often report. Solar control glass or film is an option on replacement, and checking for condensation on north-facing windows helps spot ventilation issues in colder months.
- Access and setting
- Rural portfolios can spread across a wide area, so grouping jobs and planned surveys saves visits. Older cottages often have timber windows and non-standard glass sizes, which the glazier measures carefully before ordering replacements.
- Rules in England
- Approved Document K requires safety glass in critical locations in England: glazing in doors and in side panels within 300 mm of a door, up to 1500 mm above floor level, and any glazing in walls or partitions up to 800 mm above floor level.
Guide prices in Reigate
| Typical job | Guide price inc VAT |
|---|---|
| Replace a standard sealed unit | £165 – £205 |
| Toughened door unit | £345 – £435 |
| Board up, then glaze (one window) | £315 – £405 |
Get a guide price for your size
Approved Document B covers escape windows. Where an existing window is an escape route, typically in first-floor bedrooms, its replacement should give at least the same escape opening as before.
What you can choose
Reactive repairs
Broken, cracked or misted glass and faulty windows or doors repaired as jobs are raised, with a written quote for each job.
Make-safe and boarding
Loose glass removed and openings boarded or temporarily glazed, followed by permanent glass on a second visit.
Safety glass upgrades
Replacing unmarked glass in doors, side panels and low-level panes with toughened or laminated safety glass.
Property Glazing in Reigate: questions
How much does glazing work for landlords cost?
The cost depends on the type of job, glass specification, size and number of panes, access, any boarding needed first, and whether the work is reactive or planned. Grouping planned jobs across properties usually reduces cost per job. See the guide prices for typical work, and every job has its own written quote.
Can you arrange access with our tenants directly?
Yes, if you authorise it. We contact the tenant to arrange a suitable time, confirm the appointment in writing and keep you updated. If access is refused or the tenant is not in, we report back with the dates and times of each attempt, so you have a clear record for your property file.
How do we raise a glazing job for one of our properties?
Send the job by form, phone, email or WhatsApp with the property address, a description of the problem, access details, a tenant or site contact, and any photos. Add your order reference if you use one. We confirm the job, arrange a glazier to survey or make safe, and send a written quote that carries your reference.
Can you help with void properties between tenancies?
Yes. Between tenancies, a glazier can check and repair broken or misted glass, replace damaged locks and cylinders, fix hinges and handles, and fit restrictors where needed. The work is reported with photos, giving a clear record of the property's glazing condition at the start of the next tenancy.
Do you cover Reigate for property glazing?
Yes. We can quote for property glazing across Reigate and the surrounding Surrey area, including postcode districts RH2, RH1 and RH3, and nearby Redhill, Horley and Banstead. Start with your postcode on the quote form and a glazier will arrange a free survey before giving you a written quote.
Get a written quote in Reigate
Free survey for new glazing, clear guide prices and one point of contact for every glazing job.