Reigate · Surrey
Glass Balustrades in Reigate
Need edge protection for a raised deck in Reigate? We can quote for spigot, post or channel-fixed glass and check the deck frame first so the fixings have something solid to hold.
- RH2
- RH1
- RH3
- Guide from £1,095
Glass balustrades for homes and businesses in Reigate
In England, Approved Document K sets minimum guarding heights. In a single-family home, stairs, landings and internal floor edges need at least 900mm, while external balconies, Juliet balconies and roof edges need at least 1100mm. Wales, Scotland and Northern Ireland publish their own guidance, so we check the figure that applies.
The interlayer inside laminated glass decides how a broken panel behaves. Standard PVB holds the fragments together but can let a fully broken panel sag, while stiffer structural interlayers help it stay upright. The right choice depends on whether a handrail is fitted and how exposed the balustrade is.
Glass guarding must resist the horizontal loads set for how the space is used, and those loads rise from a private home to offices, shops and busy public areas. Glass thickness, fixing system and anchors are matched to that load, so a system suited to a house stair may not suit a bar terrace.
Where a building may be used by children under five, the guidance in England says guarding should not let a 100mm sphere pass through any opening and should not be easy to climb. Solid glass helps on both counts, but gaps between panels, posts, walls and the floor still need checking.
Included as standard
- Site survey, including a check of the structure behind fixings
- Templating and measuring for made-to-measure glass panels
- Channels, clamps, posts or spigots in your chosen finish
- Fitting, levelling and alignment of every panel
Working in Reigate
- Postcodes covered
- RH2, RH1, RH3 and the surrounding area, including Redhill, Horley and Banstead
- Coast
- Reigate is well inland, around 45 km from the nearest coast, so salt exposure is not usually a factor.
- Daylight and sun
- In Reigate the midwinter sun reaches about 15° above the horizon at noon, with roughly 7.6 hours of daylight, rising to about 62° and 16.4 hours in midsummer. Glass guarding on a sunny balcony brings in heat and glare as well as the view. Tinted or satin glass can soften low winter sun on a terrace, while low-iron glass keeps colours true on north-facing spaces where every bit of daylight counts.
- Access and setting
- Older rural homes often have uneven floors, timber structures and stone walls, all of which affect how channels and posts are fixed. Exposed decks and hillside terraces also face strong wind, so the glass and fixing system are chosen for that exposure.
- Rules in England
- Approved Document K requires safety glass in critical locations in England: glazing in doors and in side panels within 300 mm of a door, up to 1500 mm above floor level, and any glazing in walls or partitions up to 800 mm above floor level.
Guide prices in Reigate
| Typical job | Guide price inc VAT |
|---|---|
| Frameless, 3 m run | £1,095 – £1,395 |
| Frameless, 6 m run | £2,195 – £2,795 |
| Post and clamp, 6 m run | £1,395 – £1,695 |
Get a guide price for your size
Approved Document K sets minimum guarding heights in England, typically 900 mm for internal stairs and landings and 1100 mm for balconies and external edges of homes. Glass guarding must be designed to resist the loads set out in BS 6180 and the loading standards it refers to.
Specification choices
Frameless channel system
Laminated toughened glass held in a continuous floor channel, giving a clean edge with no posts. Suits balconies, terraces, decks and modern stairs.
Post and clamp
Glass panels clamped between stainless steel or powder-coated posts. Often uses thinner glass and suits long runs, decking and simpler budgets.
Side-fixed standoffs
Glass fixed to the face of a slab, stair stringer or balcony edge with round standoffs through drilled holes, keeping the walking surface completely clear.
Glass Balustrades in Reigate: questions
Is outdoor balustrade glass hard to keep clean?
Outdoor glass collects rain marks, pollen and dust, so expect to clean it about as often as your windows. A soft cloth, warm water and a non-abrasive cleaner are enough. Avoid scouring pads and harsh chemicals on both the glass and the stainless or powder-coated fittings, and rinse grit and salt out of channels.
Can I fit a glass balustrade kit myself?
Kits are sold for self-fitting, but a balustrade's safety depends on the right anchors, a sound substrate, the correct glass for the system and accurate alignment. Fixing into weak timber or using toughened-only glass in a frameless channel can leave a barrier that fails under load. We supply and fit as one job and check each fixing before handover.
What happens if a balustrade panel breaks?
With laminated glass, the broken panel is held together by its interlayer and should stay in place until it is replaced. With toughened-only glass, the panel breaks into small pieces and the handrail becomes the barrier. Either way, keep people away from the edge and contact us so we can make the area safe and remake the panel to size.
How thick does the glass in a balustrade need to be?
Glass thickness depends on the fixing system, the panel height and the load the barrier must resist, so there is no single answer. Frameless channel systems commonly use thick laminated toughened glass, such as 21.5mm, while post and clamp systems often use thinner glass. The system maker's tested data sets the minimum, and we specify from that.
Do you cover Reigate for glass balustrades?
Yes. We can quote for glass balustrades across Reigate and the surrounding Surrey area, including postcode districts RH2, RH1 and RH3, and nearby Redhill, Horley and Banstead. Start with your postcode on the quote form and a glazier will arrange a free survey before giving you a written quote.
Get a written quote in Reigate
Free survey for new glazing, clear guide prices and one point of contact for every glazing job.