Putney · Greater London
Sash Windows in Putney
Rattling, rotten or stuck sashes in Putney can often be replaced while keeping your original box frames, linings and architraves where the timber is sound.
- SW15
- SW6
- SW18
- Guide from £1,495
Replacement sash windows in Putney: what to know
Trickle vents can be fitted discreetly in the head of a sash frame or the top rail. In England, Approved Document F expects ventilation after window replacement to be no worse than before, although listed buildings and conservation areas may meet it only where reasonably practicable, agreed with building control.
Slim double glazed units let sash windows keep fine glazing bars and traditional proportions while improving thermal performance. Bars can be true divisions with individual units, or bars bonded to both faces of a single unit with a spacer bar between the panes, which looks very similar from a short distance.
Heavy double glazed sashes need matching weights. When single glazed sashes are swapped for double glazed ones in an existing box, the old weights are usually too light, so the glazier re-weighs each sash to stop it dropping or creeping up, and checks the pulleys can carry the load.
A sliding sash only opens to about half its frame height, which can make an escape window harder to achieve. In England, Approved Document B guidance calls for at least 0.33 m² clear opening, 450mm high and wide, so tilt-in or side-hung escape sashes are sometimes specified for upper floors.
What you get
- Weights or balances set for smooth, even sliding
- Double glazed units, with safety glass where required
- Survey recording mouldings, horns, bars and box condition
- Made-to-measure timber or uPVC sash windows
About Putney for this job
- Postcodes covered
- SW15, SW6, SW18 and the surrounding area, including Wandsworth, Barnes and Fulham
- Coast
- Putney is well inland, around 40 km from the nearest coast, so salt exposure is not usually a factor.
- Daylight and sun
- In Putney the midwinter sun reaches about 15° above the horizon at noon, with roughly 7.6 hours of daylight, rising to about 62° and 16.4 hours in midsummer. Glazing bars and deep frames reduce daylight, so slimmer bars and high light-transmission low-E glass help north-facing rooms. Tall south-facing sashes can let in strong summer sun; the top sash can be lowered to vent warm air out at high level.
- Access and setting
- Terraced streets and conservation areas often control sash details on front elevations, so check requirements before ordering. Flats need planning permission and freeholder consent, and upper-floor sashes are usually fitted from inside, with careful protection of communal stairs and hallways.
- Rules in England
- Approved Document K requires safety glass in critical locations in England: glazing in doors and in side panels within 300 mm of a door, up to 1500 mm above floor level, and any glazing in walls or partitions up to 800 mm above floor level.
Guide prices in Putney
| Typical job | Guide price inc VAT |
|---|---|
| uPVC sliding sash, 900 × 1500 mm | £1,495 – £1,995 |
| Timber-effect uPVC sash, 900 × 1500 mm | £1,795 – £2,295 |
| Painted timber sash, 900 × 1500 mm | £2,595 – £3,295 |
Get a guide price for your size
Approved Document F covers ventilation. Replacing windows should not leave a room with worse background ventilation than before, which is why replacement windows often include trickle vents.
Choosing your sash windows
Timber box sash
Traditional weights, cords and pulleys in a box frame, made in engineered softwood or hardwood and factory painted to your colour.
Spring-balanced timber sash
Timber sashes running on concealed spring balances, giving a slimmer frame where weight pockets are not needed or space is tight.
Tilt-in sashes
Sashes that tilt inwards for cleaning upper-floor glass from inside, and can help provide an escape opening.
Sash Windows in Putney: questions
How much do sash windows cost?
The cost of sash windows depends on size, material, whether you replace the whole frame or only the sashes, the glazing bar pattern, the glass and the finishing details such as horns and mouldings. Timber usually costs more than uPVC, and listed building work costs more again. See the guide prices for typical ranges; the written quote fixes your price.
How long does it take to replace sash windows?
Fitting a single sash window usually takes most of a day, longer where the box frame is removed or plaster disturbed. A whole house typically takes several days on site. The windows are made to order first, and timber sashes with special details take longer to manufacture; the lead time is confirmed in writing with your quote.
Should I repair or replace my sash windows?
Repair suits sashes where the timber is mostly sound and only cords, beads or small sections need attention, especially in listed or conservation properties. Replacement suits frames with widespread rot, distortion or repeated failures, or where you want double glazing and better security. A survey of each window shows which approach makes sense, and we can quote either.
Will double glazed sashes be too heavy for my existing frame?
Double glazed sashes are heavier than single glazed ones, so the box frame, pulleys and weights must cope. When new sashes go into an existing box, the glazier checks the pulleys and adds or replaces weights so each sash balances. If the box is weak or rotten, a new frame is the better option, and the survey will tell you.
Do you cover Putney for sash windows?
Yes. We can quote for sash windows across Putney and the surrounding Greater London area, including postcode districts SW15, SW6 and SW18, and nearby Wandsworth, Barnes and Fulham. Start with your postcode on the quote form and a glazier will arrange a free survey before giving you a written quote.
Get a written quote in Putney
Free survey for new glazing, clear guide prices and one point of contact for every glazing job.