Angus & Dundee · Scotland

Secondary Glazing in Angus & Dundee

Single-glazed sash windows in Angus & Dundee can stay as they are, with vertical sliding secondary glazing fitted inside to reduce draughts and cold.

Guide from £465
5 towns covered
Postcode areas DD

Internal secondary windows in Angus & Dundee

Glass for secondary glazing is heavy, so the frames need firm fixings into the reveal or a supporting sub-frame. The surveyor checks that plaster, timber linings and window boards are sound enough to carry the weight, and allows for any packing needed in uneven reveals.

Opening styles include vertical sliders that line up with sash window meeting rails, horizontal sliders for wide openings, hinged casements, lift-out panels for windows that are rarely opened, and fixed panes. The choice depends on how you use the window, cleaning access and fire escape needs.

If an existing window is relied on for escape in a fire, the secondary glazing in front of it must open easily and give enough clear opening. The surveyor checks which windows are escape windows, so the opening style and catches do not block a way out.

Condensation in the gap between the two windows is reduced by making the secondary unit the more airtight of the two. The original window should not be fully sealed, so any moisture that gets into the cavity can escape outside rather than being trapped against the glass.

Sash window with secondary glazing in a period sitting room

Towns we cover for secondary glazing in Angus & Dundee

Choose your town for local details, nearby areas and the postcode districts we cover.

What applies in Angus & Dundee

Section 4 (Safety) of the Scottish Technical Handbooks covers glazing that people could collide with, such as glass in and beside doors and low-level glazing, where safety glass is needed.

Where a window provides an escape route, its replacement in Scotland should give at least the same escape opening as before.

Angus & Dundee has its own coastline, so for homes and businesses near the sea, salt air and wind-driven rain are part of the brief. Coastal properties often have older windows exposed to wind-driven rain and draughts. Secondary glazing adds a sealed inner layer that reduces draughts and cold, while the original window keeps out the weather and its condition is protected from inside.

Rural cottages and period homes often have single-glazed timber windows that cannot easily be replaced. Secondary glazing reduces draughts and heat loss in exposed locations, and the surveyor allows for uneven reveals and older plaster when fixing frames.

Guide prices

Guide prices inc VAT for typical jobs. Remote and island locations are quoted by arrangement. Your written quote fixes the price after measuring.
Typical job	Guide price inc VAT
Slider, 900 × 1200 mm	£465 – £595
Slider, 1200 × 1600 mm	£665 – £845
Acoustic glass, 1000 × 1400 mm	£675 – £865

Choosing your secondary glazing

Low-E glass

Coated glass that reflects heat back into the room, improving insulation when the original window is single glazed.

Lift-out panel

A lightweight panel that lifts out of its frame, for windows rarely opened, giving a slim and economical secondary unit.

Acoustic laminated glass

Laminated glass with a sound-dampening interlayer, combined with a generous cavity, for properties affected by traffic, rail or aircraft noise.

Horizontal sliding

Panels slide sideways, suiting wide casement windows and openings where you need regular access for cleaning or ventilation.

Secondary Glazing in Angus & Dundee: questions

Which opening style should I choose?

Choose based on how you use the window. Vertical sliders suit sash windows and keep meeting rails aligned. Horizontal sliders suit wide windows. Hinged panels give full access for cleaning and escape. Lift-out and fixed panels suit windows that are rarely or never opened, and give the tightest seal for noise.

How do I clean and look after secondary glazing?

Open or remove the panels as designed, then clean the glass with mild soapy water and a soft cloth. Wipe the aluminium frames and runners, and keep tracks free of dust so panels slide smoothly. Check seals and catches occasionally. Avoid abrasive cleaners, which can scratch coated glass.

How much noise does secondary glazing block?

Results depend on the size of the gap between the windows, the glass type and thickness, the seals and the original window. A larger cavity and acoustic laminated glass give the strongest improvement. The survey checks reveal depth and noise sources, so the specification can be tailored to the noise you are dealing with.

How much does secondary glazing cost?

The cost depends on the size and number of windows, the opening style, the type of glass, any arched or shaped heads, reveal depth and access. Acoustic and low-E glass cost more than standard clear glass, and shaped frames need more work. See the guide prices for typical windows, then get a written quote after the survey.

Which parts of Angus & Dundee do you cover for secondary glazing?

We cover the whole of Angus & Dundee, including Dundee, Arbroath, Forfar, Montrose and Carnoustie, and postcode areas DD. Building rules for secondary glazing here follow the regulations for Scotland. Enter your postcode on the quote form and we will confirm cover; then a glazier will arrange a free survey before giving you a written quote.

Other glazing services in Angus & Dundee

All glazing in Angus & Dundee · Secondary Glazing across the UK

Get a written quote in Angus & Dundee

Free survey for new glazing, clear guide prices and one point of contact for every glazing job.

Get a guide price 0800 088 6248 WhatsApp