Pembroke Dock · Dyfed
Shopfront Glazing in Pembroke Dock
Need a wider, step-free entrance for customers in Pembroke Dock? We can quote for new shopfront doors and thresholds designed around current access guidance.
- SA72
- Guide from £375
About aluminium shopfronts in Pembroke Dock
Laminated glass holds together when broken because the layers are bonded to a plastic interlayer, so a smashed display pane usually stays in its frame until it is replaced. Toughened glass breaks into small pieces and leaves an open hole, which is why laminated glass is often chosen for street-level shop windows.
Security glazing is classified under BS EN 356 by its resistance to manual attack. Classes P1A to P5A are tested by dropping a steel ball on the glass from set heights, and the higher classes P6B to P8B are tested with repeated axe and hammer blows.
If the building is listed, alterations to the shopfront need listed building consent as well as any planning permission. Many councils also publish shopfront design guides for conservation areas and high streets, which can set expectations on materials, proportions and the treatment of signs.
The price depends on the size and number of panes, the glass specification, the frame material, door type and ironmongery, access equipment for large panes and any out-of-hours working. Automatic doors, security glass classes and curved or bespoke framing add cost. See the guide prices for typical ranges.
What a typical job includes
- Removal of old glazing and temporary boarding where needed
- Installation, sealing and adjustment of entrance doors
- Survey of the frontage, structure above and entrance layout
- Safety or security glass specified to suit the position
About Pembroke Dock for this job
- Postcodes covered
- SA72 and the surrounding area, including Milford Haven, Haverfordwest and Tenby
- Coast
- Pembroke Dock is about 2 km from the coast or a tidal estuary, so salt air and wind-driven rain are worth planning for. Seafront shops face salt spray and wind-driven rain on frames, door gear and seals. Suitable aluminium finishes, regular washing of frames and clear drainage slots help, and wind exposure affects the size and thickness of display glass specified.
- Daylight and sun
- In Pembroke Dock the midwinter sun reaches about 15° above the horizon at noon, with roughly 7.6 hours of daylight, rising to about 62° and 16.4 hours in midsummer. South- and west-facing display windows can fade stock and overheat the shop in summer, while low winter sun causes glare that hides window displays. Solar control glass, window film and internal blinds can all help.
- Access and setting
- Market-town and village shops are often in older or listed buildings where timber shopfronts and traditional proportions are expected. Council design guidance and longer travel for large glass deliveries can both affect the timescale.
- Rules in Wales
- In Wales, Approved Document N covers safety glazing: safety glass is needed in and around doors and in low-level glazing where people could walk into it.
Guide prices in Pembroke Dock
| Typical job | Guide price inc VAT |
|---|---|
| Replace a laminated pane, 2000 × 2200 mm | £855 – £1,095 |
| Security laminated pane, 2000 × 2200 mm | £1,195 – £1,495 |
| Toughened door pane, 900 × 2000 mm | £375 – £485 |
Get a guide price for your size
Listed buildings in Wales need listed building consent for most changes to historic windows; Cadw publishes guidance on looking after traditional windows.
Choosing your shopfront glazing
Aluminium shopfront framing
Slim, powder-coated or anodised aluminium frames for display glass and doors, available in many colours and suited to most modern frontages.
Laminated security glass
Laminated glass classified under BS EN 356 that resists manual attack and stays in the frame when broken, keeping the shop secure.
Timber shopfront
Painted timber frames, stallrisers and doors in traditional proportions, often expected for listed buildings and conservation areas.
Shopfront Glazing in Pembroke Dock: questions
What do security glass ratings such as P2A or P4A mean?
These are classes from BS EN 356, the standard for resistance of security glazing to manual attack. Classes P1A to P5A are tested by dropping a steel ball onto the glass from set heights, with higher numbers resisting more. Classes P6B to P8B are tested with repeated axe and hammer blows and suit higher-risk premises. We advise on a class at survey.
Do I have to remove the step at my shop entrance?
Not automatically, but in England, Wales and Scotland the Equality Act 2010 requires service providers to make reasonable adjustments, which can include physical changes like a ramp or a level threshold. What is reasonable depends on the business and the building. When an entrance is replaced, building regulations on access also apply to the new work.
How long does a new shopfront take?
Replacing a single display pane can often be done in one visit once the glass is made. A complete new shopfront involves survey, any consents, manufacture of frames and glass, then installation, so allow several weeks or more overall. The fitting itself is usually short, and we board up where needed to keep the shop secure throughout.
What affects the cost of shopfront glazing?
The main cost drivers are the size and number of panes, the glass type and any security class, the frame material, the door type and ironmongery, and the access equipment needed to lift large panes. Automatic doors, bespoke shapes and out-of-hours working also add cost. See the guide prices, and your written quote fixes the price.
Do you cover Pembroke Dock for shopfront glazing?
Yes. We can quote for shopfront glazing across Pembroke Dock and the surrounding Dyfed area, including postcode districts SA72, and nearby Milford Haven, Haverfordwest and Tenby. Start with your postcode on the quote form and a glazier will arrange a free survey before giving you a written quote.
More glazing in Pembroke Dock
Get a written quote in Pembroke Dock
Free survey for new glazing, clear guide prices and one point of contact for every glazing job.