Bordon · Hampshire
Shopfront Glazing in Bordon
Is a cracked display window holding back your shop in Bordon? Our glaziers can survey the frontage and quote for safety or laminated security glass made to fit.
- GU35
- Guide from £375
Commercial shop front doors across Bordon
Laminated glass holds together when broken because the layers are bonded to a plastic interlayer, so a smashed display pane usually stays in its frame until it is replaced. Toughened glass breaks into small pieces and leaves an open hole, which is why laminated glass is often chosen for street-level shop windows.
The same guidance in England asks for an accessible entrance to have a level threshold or, where a raised threshold cannot be avoided, one no more than 15mm high in total, with a level landing in front of the door at least 1500mm by 1500mm clear of the door swing.
In England, large areas of clear glass in shopfronts and entrance screens that people could walk into need manifestation at two levels, 850–1000mm and 1400–1600mm above the floor. Logos, frosted bands or patterns can do the job if they contrast clearly with what is seen through the glass.
If the building is listed, alterations to the shopfront need listed building consent as well as any planning permission. Many councils also publish shopfront design guides for conservation areas and high streets, which can set expectations on materials, proportions and the treatment of signs.
What a typical job includes
- Removal of old glazing and temporary boarding where needed
- Installation, sealing and adjustment of entrance doors
- Survey of the frontage, structure above and entrance layout
- Aluminium or timber framing, doors and ironmongery as quoted
Local details for Bordon
- Postcodes covered
- GU35 and the surrounding area, including Farnham, Aldershot and Fleet
- Coast
- Bordon is well inland, around 30 km from the nearest coast, so salt exposure is not usually a factor.
- Daylight and sun
- In Bordon the midwinter sun reaches about 15° above the horizon at noon, with roughly 7.7 hours of daylight, rising to about 62° and 16.3 hours in midsummer. South- and west-facing display windows can fade stock and overheat the shop in summer, while low winter sun causes glare that hides window displays. Solar control glass, window film and internal blinds can all help.
- Access and setting
- Market-town and village shops are often in older or listed buildings where timber shopfronts and traditional proportions are expected. Council design guidance and longer travel for large glass deliveries can both affect the timescale.
- Rules in England
- Approved Document K requires safety glass in critical locations in England: glazing in doors and in side panels within 300 mm of a door, up to 1500 mm above floor level, and any glazing in walls or partitions up to 800 mm above floor level.
Guide prices in Bordon
| Typical job | Guide price inc VAT |
|---|---|
| Replace a laminated pane, 2000 × 2200 mm | £855 – £1,095 |
| Security laminated pane, 2000 × 2200 mm | £1,195 – £1,495 |
| Toughened door pane, 900 × 2000 mm | £375 – £485 |
Get a guide price for your size
Listed buildings in England need listed building consent for most changes to historic windows or glass, and conservation areas can restrict changes visible from the street. Speak to the council's conservation officer before ordering.
Choosing your shopfront glazing
Automatic entrance doors
Powered sliding or swing doors opened by sensor or push pad, making entry easier for wheelchair users, buggies and deliveries.
Timber shopfront
Painted timber frames, stallrisers and doors in traditional proportions, often expected for listed buildings and conservation areas.
Insulated glass units
Sealed double-glazed units in the shopfront frames, reducing heat loss and condensation compared with single sheets of display glass.
Shopfront Glazing in Bordon: questions
What type of glass should a shopfront have?
Shopfront glass must be safety glass wherever it sits in a critical location, such as doors, panels beside doors and low-level panes. Beyond that, laminated glass is often chosen for display windows because it stays in the frame when broken, keeping the premises secure. Higher-security laminated glass classified under BS EN 356 can be specified where risk is greater.
Do I have to remove the step at my shop entrance?
Not automatically, but in England, Wales and Scotland the Equality Act 2010 requires service providers to make reasonable adjustments, which can include physical changes like a ramp or a level threshold. What is reasonable depends on the business and the building. When an entrance is replaced, building regulations on access also apply to the new work.
What do security glass ratings such as P2A or P4A mean?
These are classes from BS EN 356, the standard for resistance of security glazing to manual attack. Classes P1A to P5A are tested by dropping a steel ball onto the glass from set heights, with higher numbers resisting more. Classes P6B to P8B are tested with repeated axe and hammer blows and suit higher-risk premises. We advise on a class at survey.
Can my shop stay open while the shopfront is replaced?
Often, yes, at least in part. Work can be phased so one section is replaced while the entrance stays usable, or carried out early, late or on closing days where access and noise rules allow. Temporary boarding keeps the premises secure between stages. We agree the programme with you before work starts so trading disruption is planned.
Do you cover Bordon for shopfront glazing?
Yes. We can quote for shopfront glazing across Bordon and the surrounding Hampshire area, including postcode districts GU35, and nearby Farnham, Aldershot and Fleet. Start with your postcode on the quote form and a glazier will arrange a free survey before giving you a written quote.
Get a written quote in Bordon
Free survey for new glazing, clear guide prices and one point of contact for every glazing job.